/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2014-2015 Samsung Electronics * Przemyslaw Marczak */ #ifndef _INCLUDE_REGULATOR_H_ #define _INCLUDE_REGULATOR_H_ struct udevice; /** * U-Boot Voltage/Current Regulator * ================================ * * The regulator API is based on a driver model, with the device tree support. * And this header describes the functions and data types for the uclass id: * 'UCLASS_REGULATOR' and the regulator driver API. * * The regulator uclass - is based on uclass platform data which is allocated, * automatically for each regulator device on bind and 'dev->uclass_plat' * points to it. The data type is: 'struct dm_regulator_uclass_plat'. * The uclass file: 'drivers/power/regulator/regulator-uclass.c' * * The regulator device - is based on driver's model 'struct udevice'. * The API can use regulator name in two meanings: * - devname - the regulator device's name: 'dev->name' * - platname - the device's plat's name. So in the code it looks like: * 'uc_pdata = dev->uclass_plat'; 'name = uc_pdata->name'. * * The regulator device driver - provide an implementation of uclass operations * pointed by 'dev->driver->ops' as a struct of type 'struct dm_regulator_ops'. * * To proper bind the regulator device, the device tree node should provide * regulator constraints, like in the example below: * * ldo1 { * regulator-name = "VDD_MMC_1.8V"; (must be unique for proper bind) * regulator-min-microvolt = <1000000>; (optional) * regulator-max-microvolt = <1000000>; (optional) * regulator-min-microamp = <1000>; (optional) * regulator-max-microamp = <1000>; (optional) * regulator-always-on; (optional) * regulator-boot-on; (optional) * }; * * Note: For the proper operation, at least name constraint is needed, since * it can be used when calling regulator_get_by_platname(). And the mandatory * rule for this name is, that it must be globally unique for the single dts. * If regulator-name property is not provided, node name will be chosen. * * Regulator bind: * For each regulator device, the device_bind() should be called with passed * device tree offset. This is required for this uclass's '.post_bind' method, * which does the scan on the device node, for the 'regulator-name' constraint. * If the parent is not a PMIC device, and the child is not bind by function: * 'pmic_bind_childs()', then it's recommended to bind the device by call to * dm_scan_fdt_dev() - this is usually done automatically for bus devices, * as a post bind method. * * Regulator get: * Having the device's name constraint, we can call regulator_by_platname(), * to find the required regulator. Before return, the regulator is probed, * and the rest of its constraints are put into the device's uclass platform * data, by the uclass regulator '.pre_probe' method. * * For more info about PMIC bind, please refer to file: 'include/power/pmic.h' * * Note: * Please do not use the device_bind_by_name() function, since it pass '-1' as * device node offset - and the bind will fail on uclass .post_bind method, * because of missing 'regulator-name' constraint. * * * Fixed Voltage/Current Regulator * =============================== * * When fixed voltage regulator is needed, then enable the config: * - CONFIG_DM_REGULATOR_FIXED * * The driver file: 'drivers/power/regulator/fixed.c', provides basic support * for control the GPIO, and return the device tree constraint values. * * To bind the fixed voltage regulator device, we usually use a 'simple-bus' * node as a parent. And 'regulator-fixed' for the driver compatible. This is * the same as in the kernel. The example node of fixed regulator: * * simple-bus { * compatible = "simple-bus"; * #address-cells = <1>; * #size-cells = <0>; * * blue_led { * compatible = "regulator-fixed"; * regulator-name = "VDD_LED_3.3V"; * regulator-min-microvolt = <3300000>; * regulator-max-microvolt = <3300000>; * gpio = <&gpc1 0 GPIO_ACTIVE_LOW>; * }; * }; * * The fixed regulator devices also provide regulator uclass platform data. And * devices bound from such node, can use the regulator drivers API. */ /* enum regulator_type - used for regulator_*() variant calls */ enum regulator_type { REGULATOR_TYPE_LDO = 0, REGULATOR_TYPE_BUCK, REGULATOR_TYPE_DVS, REGULATOR_TYPE_FIXED, REGULATOR_TYPE_GPIO, REGULATOR_TYPE_OTHER, }; /** * struct dm_regulator_mode - this structure holds an information about * each regulator operation mode. Probably in most cases - an array. * This will be probably a driver-static data, since it is device-specific. * * @id - a driver-specific mode id * @register_value - a driver-specific value for its mode id * @name - the name of mode - used for regulator command * Note: * The field 'id', should be always a positive number, since the negative values * are reserved for the errno numbers when returns the mode id. */ struct dm_regulator_mode { int id; /* Set only as >= 0 (negative value is reserved for errno) */ int register_value; const char *name; }; enum regulator_flag { REGULATOR_FLAG_AUTOSET_UV = 1 << 0, REGULATOR_FLAG_AUTOSET_UA = 1 << 1, REGULATOR_FLAG_AUTOSET_DONE = 1 << 2, }; /** * struct dm_regulator_uclass_plat - pointed by dev->uclass_plat, and * allocated on each regulator bind. This structure holds an information * about each regulator's constraints and supported operation modes. * There is no "step" voltage value - so driver should take care of this. * * @type - one of 'enum regulator_type' * @mode - pointer to the regulator mode (array if more than one) * @mode_count - number of '.mode' entries * @min_uV* - minimum voltage (micro Volts) * @max_uV* - maximum voltage (micro Volts) * @min_uA* - minimum amperage (micro Amps) * @max_uA* - maximum amperage (micro Amps) * @always_on* - bool type, true or false * @boot_on* - bool type, true or false * @force_off* - bool type, true or false * TODO(sjg@chromium.org): Consider putting the above two into @flags * @ramp_delay - Time to settle down after voltage change (unit: uV/us) * @flags: - flags value (see REGULATOR_FLAG_...) * @name** - fdt regulator name - should be taken from the device tree * ctrl_reg: - Control register offset used to enable/disable regulator * volt_reg: - register offset for writing voltage vsel values * * Note: * * - set automatically on device probe by the uclass's '.pre_probe' method. * ** - set automatically on device bind by the uclass's '.post_bind' method. * The constraints: type, mode, mode_count, can be set by device driver, e.g. * by the driver '.probe' method. */ struct dm_regulator_uclass_plat { enum regulator_type type; struct dm_regulator_mode *mode; int mode_count; int min_uV; int max_uV; int init_uV; int min_uA; int max_uA; unsigned int ramp_delay; bool always_on; bool boot_on; bool force_off; const char *name; int flags; u8 ctrl_reg; u8 volt_reg; bool suspend_on; u32 suspend_uV; }; /* Regulator device operations */ struct dm_regulator_ops { /** * The regulator output value function calls operates on a micro Volts. * * get/set_value - get/set output value of the given output number * @dev - regulator device * Sets: * @uV - set the output value [micro Volts] * @return output value [uV] on success or negative errno if fail. */ int (*get_value)(struct udevice *dev); int (*set_value)(struct udevice *dev, int uV); /** * The regulator suspend output value function calls operates * on a micro Volts. * * get/set_suspen_value - get/set suspend mode output value * @dev - regulator device * Sets: * @uV - set the suspend output value [micro Volts] * @return output value [uV] on success or negative errno if fail. */ int (*set_suspend_value)(struct udevice *dev, int uV); int (*get_suspend_value)(struct udevice *dev); /** * The regulator output current function calls operates on a micro Amps. * * get/set_current - get/set output current of the given output number * @dev - regulator device * Sets: * @uA - set the output current [micro Amps] * @return output value [uA] on success or negative errno if fail. */ int (*get_current)(struct udevice *dev); int (*set_current)(struct udevice *dev, int uA); /** * The most basic feature of the regulator output is its enable state. * * get/set_enable - get/set enable state of the given output number * @dev - regulator device * Sets: * @enable - set true - enable or false - disable * @return true/false for get or -errno if fail; 0 / -errno for set. */ int (*get_enable)(struct udevice *dev); int (*set_enable)(struct udevice *dev, bool enable); /** * The most basic feature of the regulator output is its enable state * in suspend mode. * * get/set_suspend_enable - get/set enable state of the suspend output * @dev - regulator device * Sets: * @enable - set true - enable or false - disable * @return true/false for get or -errno if fail; 0 / -errno for set. */ int (*set_suspend_enable)(struct udevice *dev, bool enable); int (*get_suspend_enable)(struct udevice *dev); /** * The 'get/set_mode()' function calls should operate on a driver- * specific mode id definitions, which should be found in: * field 'id' of struct dm_regulator_mode. * * get/set_mode - get/set operation mode of the given output number * @dev - regulator device * Sets * @mode_id - set output mode id (struct dm_regulator_mode->id) * @return id/0 for get/set on success or negative errno if fail. * Note: * The field 'id' of struct type 'dm_regulator_mode', should be always * a positive number, since the negative is reserved for the error. */ int (*get_mode)(struct udevice *dev); int (*set_mode)(struct udevice *dev, int mode_id); }; #if CONFIG_IS_ENABLED(DM_REGULATOR) /** * regulator_mode: returns a pointer to the array of regulator mode info * * @dev - pointer to the regulator device * @modep - pointer to the returned mode info array * Return: - count of modep entries on success or negative errno if fail. */ int regulator_mode(struct udevice *dev, struct dm_regulator_mode **modep); /** * regulator_get_value: get microvoltage voltage value of a given regulator * * @dev - pointer to the regulator device * Return: - positive output value [uV] on success or negative errno if fail. */ int regulator_get_value(struct udevice *dev); /** * regulator_set_value: set the microvoltage value of a given regulator. * * @dev - pointer to the regulator device * @uV - the output value to set [micro Volts] * Return: - 0 on success or -errno val if fails */ int regulator_set_value(struct udevice *dev, int uV); /** * regulator_set_suspend_value: set the suspend microvoltage value of a given regulator. * * @dev - pointer to the regulator device * @uV - the output suspend value to set [micro Volts] * Return: - 0 on success or -errno val if fails */ int regulator_set_suspend_value(struct udevice *dev, int uV); /** * regulator_get_suspend_value: get the suspend microvoltage value of a given regulator. * * @dev - pointer to the regulator device * Return: - positive output value [uV] on success or negative errno if fail. */ int regulator_get_suspend_value(struct udevice *dev); /** * regulator_set_value_force: set the microvoltage value of a given regulator * without any min-,max condition check * * @dev - pointer to the regulator device * @uV - the output value to set [micro Volts] * Return: - 0 on success or -errno val if fails */ int regulator_set_value_force(struct udevice *dev, int uV); /** * regulator_get_current: get microampere value of a given regulator * * @dev - pointer to the regulator device * Return: - positive output current [uA] on success or negative errno if fail. */ int regulator_get_current(struct udevice *dev); /** * regulator_set_current: set the microampere value of a given regulator. * * @dev - pointer to the regulator device * @uA - set the output current [micro Amps] * Return: - 0 on success or -errno val if fails */ int regulator_set_current(struct udevice *dev, int uA); /** * regulator_get_enable: get regulator device enable state. * * @dev - pointer to the regulator device * Return: - true/false of enable state or -errno val if fails */ int regulator_get_enable(struct udevice *dev); /** * regulator_set_enable: set regulator enable state * * @dev - pointer to the regulator device * @enable - set true or false * Return: - 0 on success or -errno val if fails */ int regulator_set_enable(struct udevice *dev, bool enable); /** * regulator_set_enable_if_allowed: set regulator enable state if allowed by * regulator * * @dev - pointer to the regulator device * @enable - set true or false * Return: - 0 on success or if enabling is not supported * -errno val if fails. */ int regulator_set_enable_if_allowed(struct udevice *dev, bool enable); /** * regulator_set_suspend_enable: set regulator suspend enable state * * @dev - pointer to the regulator device * @enable - set true or false * Return: - 0 on success or -errno val if fails */ int regulator_set_suspend_enable(struct udevice *dev, bool enable); /** * regulator_get_suspend_enable: get regulator suspend enable state * * @dev - pointer to the regulator device * Return: - true/false of enable state or -errno val if fails */ int regulator_get_suspend_enable(struct udevice *dev); /** * regulator_get_mode: get active operation mode id of a given regulator * * @dev - pointer to the regulator device * Return: - positive mode 'id' number on success or -errno val if fails * Note: * The device can provide an array of operating modes, which is type of struct * dm_regulator_mode. Each mode has it's own 'id', which should be unique inside * that array. By calling this function, the driver should return an active mode * id of the given regulator device. */ int regulator_get_mode(struct udevice *dev); /** * regulator_set_mode: set the given regulator's, active mode id * * @dev - pointer to the regulator device * @mode_id - mode id to set ('id' field of struct type dm_regulator_mode) * Return: - 0 on success or -errno value if fails * Note: * The device can provide an array of operating modes, which is type of struct * dm_regulator_mode. Each mode has it's own 'id', which should be unique inside * that array. By calling this function, the driver should set the active mode * of a given regulator to given by "mode_id" argument. */ int regulator_set_mode(struct udevice *dev, int mode_id); /** * regulators_enable_boot_on() - enable regulators needed for boot * * This enables all regulators which are marked to be on at boot time. This * only works for regulators which don't have a range for voltage/current, * since in that case it is not possible to know which value to use. * * This effectively calls regulator_autoset() for every regulator. */ int regulators_enable_boot_on(bool verbose); /** * regulators_enable_boot_off() - disable regulators needed for boot * * This disables all regulators which are marked to be off at boot time. * * This effectively calls regulator_unset() for every regulator. */ int regulators_enable_boot_off(bool verbose); /** * regulator_autoset: setup the voltage/current on a regulator * * The setup depends on constraints found in device's uclass's platform data * (struct dm_regulator_uclass_plat): * * - Enable - will set - if any of: 'always_on' or 'boot_on' is set to true, * or if both are unset, then the function returns * - Voltage value - will set - if '.min_uV' and '.max_uV' values are equal * - Current limit - will set - if '.min_uA' and '.max_uA' values are equal * * The function returns on the first-encountered error. * * @platname - expected string for dm_regulator_uclass_plat .name field * @devp - returned pointer to the regulator device - if non-NULL passed * @return: 0 on success or negative value of errno. */ int regulator_autoset(struct udevice *dev); /** * regulator_unset: turn off a regulator * * The setup depends on constraints found in device's uclass's platform data * (struct dm_regulator_uclass_platdata): * * - Disable - will set - if 'force_off' is set to true, * * The function returns on the first-encountered error. */ int regulator_unset(struct udevice *dev); /** * regulator_autoset_by_name: setup the regulator given by its uclass's * platform data name field. The setup depends on constraints found in device's * uclass's platform data (struct dm_regulator_uclass_plat): * - Enable - will set - if any of: 'always_on' or 'boot_on' is set to true, * or if both are unset, then the function returns * - Voltage value - will set - if '.min_uV' and '.max_uV' values are equal * - Current limit - will set - if '.min_uA' and '.max_uA' values are equal * * The function returns on first encountered error. * * @platname - expected string for dm_regulator_uclass_plat .name field * @devp - returned pointer to the regulator device - if non-NULL passed * @return: 0 on success or negative value of errno. * * The returned 'regulator' device can be used with: * - regulator_get/set_* */ int regulator_autoset_by_name(const char *platname, struct udevice **devp); /** * regulator_list_autoset: setup the regulators given by list of their uclass's * platform data name field. The setup depends on constraints found in device's * uclass's platform data. The function loops with calls to: * regulator_autoset_by_name() for each name from the list. * * @list_platname - an array of expected strings for .name field of each * regulator's uclass plat * @list_devp - an array of returned pointers to the successfully setup * regulator devices if non-NULL passed * @verbose - (true/false) print each regulator setup info, or be quiet * Return: 0 on successfully setup of all list entries, otherwise first error. * * The returned 'regulator' devices can be used with: * - regulator_get/set_* * * Note: The list must ends with NULL entry, like in the "platname" list below: * char *my_regulators[] = { * "VCC_3.3V", * "VCC_1.8V", * NULL, * }; */ int regulator_list_autoset(const char *list_platname[], struct udevice *list_devp[], bool verbose); /** * regulator_get_by_devname: returns the pointer to the pmic regulator device. * Search by name, found in regulator device's name. * * @devname - expected string for 'dev->name' of regulator device * @devp - returned pointer to the regulator device * Return: 0 on success or negative value of errno. * * The returned 'regulator' device is probed and can be used with: * - regulator_get/set_* */ int regulator_get_by_devname(const char *devname, struct udevice **devp); /** * regulator_get_by_platname: returns the pointer to the pmic regulator device. * Search by name, found in regulator uclass plat. * * @platname - expected string for uc_pdata->name of regulator uclass plat * @devp - returns pointer to the regulator device or NULL on error * Return: 0 on success or negative value of errno. * * The returned 'regulator' device is probed and can be used with: * - regulator_get/set_* */ int regulator_get_by_platname(const char *platname, struct udevice **devp); /** * device_get_supply_regulator: returns the pointer to the supply regulator. * Search by phandle, found in device's node. * * Note: Please pay attention to proper order of device bind sequence. * The regulator device searched by the phandle, must be binded before * this function call. * * @dev - device with supply phandle * @supply_name - phandle name of regulator * @devp - returned pointer to the supply device * Return: 0 on success or negative value of errno. */ int device_get_supply_regulator(struct udevice *dev, const char *supply_name, struct udevice **devp); #else static inline int regulator_mode(struct udevice *dev, struct dm_regulator_mode **modep) { return -ENOSYS; } static inline int regulator_get_value(struct udevice *dev) { return -ENOSYS; } static inline int regulator_set_value(struct udevice *dev, int uV) { return -ENOSYS; } static inline int regulator_set_suspend_value(struct udevice *dev, int uV) { return -ENOSYS; } static inline int regulator_get_suspend_value(struct udevice *dev) { return -ENOSYS; } static inline int regulator_set_value_force(struct udevice *dev, int uV) { return -ENOSYS; } static inline int regulator_get_current(struct udevice *dev) { return -ENOSYS; } static inline int regulator_set_current(struct udevice *dev, int uA) { return -ENOSYS; } static inline int regulator_get_enable(struct udevice *dev) { return -ENOSYS; } static inline int regulator_set_enable(struct udevice *dev, bool enable) { return -ENOSYS; } static inline int regulator_set_enable_if_allowed(struct udevice *dev, bool enable) { return -ENOSYS; } static inline int regulator_set_suspend_enable(struct udevice *dev, bool enable) { return -ENOSYS; } static inline int regulator_get_suspend_enable(struct udevice *dev) { return -ENOSYS; } static inline int regulator_get_mode(struct udevice *dev) { return -ENOSYS; } static inline int regulator_set_mode(struct udevice *dev, int mode_id) { return -ENOSYS; } static inline int regulators_enable_boot_on(bool verbose) { return -ENOSYS; } static inline int regulator_autoset(struct udevice *dev) { return -ENOSYS; } static inline int regulator_autoset_by_name(const char *platname, struct udevice **devp) { return -ENOSYS; } static inline int regulator_list_autoset(const char *list_platname[], struct udevice *list_devp[], bool verbose) { return -ENOSYS; } static inline int regulator_get_by_devname(const char *devname, struct udevice **devp) { return -ENOSYS; } static inline int regulator_get_by_platname(const char *platname, struct udevice **devp) { return -ENOSYS; } static inline int device_get_supply_regulator(struct udevice *dev, const char *supply_name, struct udevice **devp) { return -ENOSYS; } #endif #endif /* _INCLUDE_REGULATOR_H_ */