/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2013 Google, Inc * * (C) Copyright 2012 * Pavel Herrmann * Marek Vasut */ #ifndef _DM_DEVICE_INTERNAL_H #define _DM_DEVICE_INTERNAL_H #include #include #include struct device_node; struct driver_info; struct udevice; /* * These two macros DM_DEVICE_INST and DM_DEVICE_REF are only allowed in code * generated by dtoc, because the ordering is important and if other instances * creep in then they may mess up the ordering expected by dtoc. * * It is OK to use them with 'extern' though, since that does not actually * add a new record to the linker_list. */ /** * DM_DEVICE_INST() - Declare a bound device ready for run-time use * * This adds an actual struct udevice to a list which is found by driver model * on start-up. * * For example: * * extern U_BOOT_DRIVER(sandbox_fixed_clock); * extern DM_UCLASS_INST(clk); * * DM_DEVICE_INST(clk_fixed) = { * .driver = DM_DRIVER_REF(sandbox_fixed_clock), * .name = "sandbox_fixed_clock", * .plat_ = &_sandbox_fixed_clock_plat_clk_fixed, * .uclass = DM_UCLASS_REF(clk), * ... * .seq_ = 0, * }; * * @_name: Name of the udevice. This must be a valid C identifier, used by the * linker_list. */ #define DM_DEVICE_INST(_name) \ ll_entry_declare(struct udevice, _name, udevice) /** * DM_DEVICE_REF() - Get a reference to a device * * This is useful in data structures and code for referencing a udevice at * build time. Before this is used, an extern DM_DEVICE_INST() must have been * declared. * * For example: * * extern DM_DEVICE_INST(clk_fixed); * * struct udevice *devs[] = { * DM_DEVICE_REF(clk_fixed), * }; * * @_name: Name of the udevice. This must be a valid C identifier, used by the * linker_list * @returns struct udevice * for the device */ #define DM_DEVICE_REF(_name) \ ll_entry_ref(struct udevice, _name, udevice) /** * DM_DEVICE_GET() - Get a pointer to a given device * * This is similar to DM_DEVICE_REF() except that it does not need the extern * declaration before it. However it cannot be used in a data structures, only * in code within a function. * * For example: * * void some_function() { * struct udevice *dev = DM_DEVICE_GET(clk_fixed); * ... * } */ #define DM_DEVICE_GET(__name) \ ll_entry_get(struct udevice, __name, udevice) /** * device_bind() - Create a device and bind it to a driver * * Called to set up a new device attached to a driver. The device will either * have plat, or a device tree node which can be used to create the * plat. * * Once bound a device exists but is not yet active until device_probe() is * called. * * @parent: Pointer to device's parent, under which this driver will exist * @drv: Device's driver * @name: Name of device (e.g. device tree node name) * @plat: Pointer to data for this device - the structure is device- * specific but may include the device's I/O address, etc.. This is NULL for * devices which use device tree. * @ofnode: Devicetree node for this device. This is ofnode_null() for * devices which don't use devicetree or don't have a node. * @devp: if non-NULL, returns a pointer to the bound device * Return: 0 if OK, -ve on error */ int device_bind(struct udevice *parent, const struct driver *drv, const char *name, void *plat, ofnode node, struct udevice **devp); /** * device_bind_with_driver_data() - Create a device and bind it to a driver * * Called to set up a new device attached to a driver, in the case where the * driver was matched to the device by means of a match table that provides * driver_data. * * Once bound a device exists but is not yet active until device_probe() is * called. * * @parent: Pointer to device's parent, under which this driver will exist * @drv: Device's driver * @name: Name of device (e.g. device tree node name) * @driver_data: The driver_data field from the driver's match table. * @node: Device tree node for this device. This is invalid for devices which * don't use device tree. * @devp: if non-NULL, returns a pointer to the bound device * Return: 0 if OK, -ve on error */ int device_bind_with_driver_data(struct udevice *parent, const struct driver *drv, const char *name, ulong driver_data, ofnode node, struct udevice **devp); /** * device_bind_by_name: Create a device and bind it to a driver * * This is a helper function used to bind devices which do not use device * tree. * * @parent: Pointer to device's parent * @pre_reloc_only: If true, bind the driver only if its DM_FLAG_PRE_RELOC flag * is set. If false bind the driver always. * @info: Name and plat for this device * @devp: if non-NULL, returns a pointer to the bound device * Return: 0 if OK, -ve on error */ int device_bind_by_name(struct udevice *parent, bool pre_reloc_only, const struct driver_info *info, struct udevice **devp); /** * device_reparent: reparent the device to a new parent * * @dev: pointer to device to be reparented * @new_parent: pointer to new parent device * Return: 0 if OK, -ve on error */ int device_reparent(struct udevice *dev, struct udevice *new_parent); /** * device_of_to_plat() - Read platform data for a device * * Read platform data for a device (typically from the device tree) so that * the information needed to probe the device is present. * * This may cause some others devices to be probed if this one depends on them, * e.g. a GPIO line will cause a GPIO device to be probed. * * All private data associated with the device is allocated. * * @dev: Pointer to device to process * Return: 0 if OK, -ve on error */ int device_of_to_plat(struct udevice *dev); /** * device_probe() - Probe a device, activating it * * Activate a device (if not yet activated) so that it is ready for use. * All its parents are probed first. * * @dev: Pointer to device to probe * Return: 0 if OK, -ve on error */ int device_probe(struct udevice *dev); /** * device_remove() - Remove a device, de-activating it * * De-activate a device so that it is no longer ready for use. All its * children are deactivated first. * * @dev: Pointer to device to remove * @flags: Flags for selective device removal (DM_REMOVE_...) * Return: 0 if OK, -EKEYREJECTED if not removed due to flags, -EPROBE_DEFER if * this is a vital device and flags is DM_REMOVE_NON_VITAL, other -ve on * error (such an error here is normally a very bad thing) */ #if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) int device_remove(struct udevice *dev, uint flags); #else static inline int device_remove(struct udevice *dev, uint flags) { return 0; } #endif /** * device_unbind() - Unbind a device, destroying it * * Unbind a device and remove all memory used by it * * @dev: Pointer to device to unbind * Return: 0 if OK, -ve on error */ #if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) int device_unbind(struct udevice *dev); #else static inline int device_unbind(struct udevice *dev) { return 0; } #endif #if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) void device_free(struct udevice *dev); #else static inline void device_free(struct udevice *dev) {} #endif /** * device_chld_unbind() - Unbind all device's children from the device if bound * to drv * * On error, the function continues to unbind all children, and reports the * first error. * * @dev: The device that is to be stripped of its children * @drv: The targeted driver * Return: 0 on success, -ve on error */ #if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) int device_chld_unbind(struct udevice *dev, struct driver *drv); #else static inline int device_chld_unbind(struct udevice *dev, struct driver *drv) { return 0; } #endif /** * device_chld_remove() - Stop all device's children * * This continues through all children recursively stopping part-way through if * an error occurs. Return values of -EKEYREJECTED are ignored and processing * continues, since they just indicate that the child did not elect to be * removed based on the value of @flags. Return values of -EPROBE_DEFER cause * processing of other children to continue, but the function will return * -EPROBE_DEFER. * * @dev: The device whose children are to be removed * @drv: The targeted driver * @flags: Flag, if this functions is called in the pre-OS stage * Return: 0 on success, -EPROBE_DEFER if any child failed to remove, other * -ve on error */ #if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) int device_chld_remove(struct udevice *dev, struct driver *drv, uint flags); #else static inline int device_chld_remove(struct udevice *dev, struct driver *drv, uint flags) { return 0; } #endif /** * dev_set_priv() - Set the private data for a device * * This is normally handled by driver model, which automatically allocates * private data when an 'auto' size if provided by the driver. * * Use this function to override normal operation for special situations, such * as needing to allocate a variable amount of data. * * If OF_PLATDATA_RT is enabled, this function cannot be used out of core driver * model code, since the pointer must be within the gd->dm_priv_base region. * * @dev Device to check * @priv New private-data pointer */ void dev_set_priv(struct udevice *dev, void *priv); /** * dev_set_parent_priv() - Set the parent-private data for a device * * This is normally handled by driver model, which automatically allocates * parent-private data when an 'auto' size if provided by the driver. * * Use this function to override normal operation for special situations, such * as needing to allocate a variable amount of data. * * If OF_PLATDATA_RT is enabled, this function cannot be used out of core driver * model code, since the pointer must be within the gd->dm_priv_base region. * * @dev: Device to update * @parent_priv: New parent-private data */ void dev_set_parent_priv(struct udevice *dev, void *parent_priv); /** * dev_set_uclass_priv() - Set the uclass private data for a device * * This is normally handled by driver model, which automatically allocates * uclass-private data when an 'auto' size if provided by the driver. * * Use this function to override normal operation for special situations, such * as needing to allocate a variable amount of data. * * If OF_PLATDATA_RT is enabled, this function cannot be used out of core driver * model code, since the pointer must be within the gd->dm_priv_base region. * * @dev: Device to update * @uclass_priv: New uclass private data */ void dev_set_uclass_priv(struct udevice *dev, void *uclass_priv); /** * dev_set_plat() - Set the platform data for a device * * This is normally handled by driver model, which automatically allocates * platform data when an 'auto' size if provided by the driver. * * Use this function to override normal operation for special situations, such * as needing to allocate a variable amount of data. * * If OF_PLATDATA_RT is enabled, this function cannot be used out of core driver * model code, since the pointer must be within the gd->dm_priv_base region. * * @dev Device to check * @plat New platform-data pointer */ void dev_set_plat(struct udevice *dev, void *priv); /** * dev_set_parent_plat() - Set the parent platform data for a device * * This is normally handled by driver model, which automatically allocates * parent platform data when an 'auto' size if provided by the driver. * * Use this function to override normal operation for special situations, such * as needing to allocate a variable amount of data. * * If OF_PLATDATA_RT is enabled, this function cannot be used out of core driver * model code, since the pointer must be within the gd->dm_priv_base region. * * @dev: Device to update * @parent_plat: New parent platform data */ void dev_set_parent_plat(struct udevice *dev, void *parent_plat); /** * dev_set_uclass_plat() - Set the uclass platform data for a device * * This is normally handled by driver model, which automatically allocates * uclass platform data when an 'auto' size if provided by the driver. * * Use this function to override normal operation for special situations, such * as needing to allocate a variable amount of data. * * If OF_PLATDATA_RT is enabled, this function cannot be used out of core driver * model code, since the pointer must be within the gd->dm_priv_base region. * * @dev: Device to update * @uclass_plat: New uclass platform data */ void dev_set_uclass_plat(struct udevice *dev, void *uclass_plat); /** * simple_bus_translate() - translate a bus address to a system address * * This handles the 'ranges' property in a simple bus. It translates the * device address @addr to a system address using this property. * * @dev: Simple bus device (parent of target device) * @addr: Address to translate * Return: new address */ fdt_addr_t simple_bus_translate(struct udevice *dev, fdt_addr_t addr); /* Cast away any volatile pointer */ #define DM_ROOT_NON_CONST (((gd_t *)gd)->dm_root) #define DM_UCLASS_ROOT_NON_CONST (((gd_t *)gd)->uclass_root) #define DM_UCLASS_ROOT_S_NON_CONST (((gd_t *)gd)->uclass_root_s) /* device resource management */ #if CONFIG_IS_ENABLED(DEVRES) /** * devres_release_probe - Release managed resources allocated after probing * @dev: Device to release resources for * * Release all resources allocated for @dev when it was probed or later. * This function is called on driver removal. */ void devres_release_probe(struct udevice *dev); /** * devres_release_all - Release all managed resources * @dev: Device to release resources for * * Release all resources associated with @dev. This function is * called on driver unbinding. */ void devres_release_all(struct udevice *dev); #else /* ! DEVRES */ static inline void devres_release_probe(struct udevice *dev) { } static inline void devres_release_all(struct udevice *dev) { } #endif /* DEVRES */ static inline int device_notify(const struct udevice *dev, enum event_t type) { #if CONFIG_IS_ENABLED(DM_EVENT) return event_notify(type, &dev, sizeof(dev)); #else return 0; #endif } #endif