/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2015 Technexion Ltd. * * Configuration settings for the Technexion PICO-IMX6UL-EMMC board. */ #ifndef __PICO_IMX6UL_CONFIG_H #define __PICO_IMX6UL_CONFIG_H #include #include #include "mx6_common.h" #include /* Network support */ #define CFG_FEC_MXC_PHYADDR 0x1 #define CFG_MXC_UART_BASE UART6_BASE_ADDR /* MMC Configs */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR /* USB Configs */ #define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CFG_MXC_USB_FLAGS 0 #define DFU_DEFAULT_POLL_TIMEOUT 300 #define CFG_DFU_ENV_SETTINGS \ "dfu_alt_info=" \ "spl raw 0x2 0x400;" \ "u-boot raw 0x8a 0x400;" \ "/boot/zImage ext4 0 1;" \ "/boot/imx6ul-pico-hobbit.dtb ext4 0 1;" \ "/boot/imx6ul-pico-pi.dtb ext4 0 1;" \ "rootfs part 0 1\0" \ #define BOOTMENU_ENV \ "bootmenu_0=Boot using PICO-Dwarf baseboard=" \ "setenv fdtfile imx6ul-pico-dwarf.dtb\0" \ "bootmenu_1=Boot using PICO-Hobbit baseboard=" \ "setenv fdtfile imx6ul-pico-hobbit.dtb\0" \ "bootmenu_2=Boot using PICO-Pi baseboard=" \ "setenv fdtfile imx6ul-pico-pi.dtb\0" \ #define CFG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ "splashpos=m,m\0" \ "console=ttymxc5\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "videomode=video=ctfb:x:800,y:480,depth:24,mode:0,pclk:30000,le:46,ri:210,up:22,lo:23,hs:20,vs:10,sync:0,vmode:0\0" \ BOOTMENU_ENV \ "fdt_addr=0x83000000\0" \ "fdt_addr_r=0x83000000\0" \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "ramdisk_addr_r=0x83000000\0" \ "ramdiskaddr=0x83000000\0" \ "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "mmcautodetect=yes\0" \ CFG_DFU_ENV_SETTINGS \ "findfdt=" \ "if test $fdtfile = ask ; then " \ "bootmenu -1; fi;" \ "if test $fdtfile != ask ; then " \ "saveenv; fi;\0" \ "finduuid=part uuid mmc 0:1 uuid\0" \ "partitions=" \ "uuid_disk=${uuid_gpt_disk};" \ "name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \ "fastboot_partition_alias_system=rootfs\0" \ "setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \ BOOTENV #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) #include #include /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM #define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #ifdef CONFIG_VIDEO #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR #endif #endif /* __PICO_IMX6UL_CONFIG_H */