/* SPDX-License-Identifier: GPL-2.0+ */ /* * Common configuration settings for IGEP technology based boards * * (C) Copyright 2012 * ISEE 2007 SL, */ #ifndef __IGEP00X0_H #define __IGEP00X0_H #include /* * We are only ever GP parts and will utilize all of the "downloaded image" * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB). */ /* TPS65950 */ #define PBIASLITEVMODE1 (1 << 8) /* LED */ #define IGEP0020_GPIO_LED 27 #define IGEP0030_GPIO_LED 16 /* Board and revision detection GPIOs */ #define IGEP0030_USB_TRANSCEIVER_RESET 54 #define GPIO_IGEP00X0_BOARD_DETECTION 28 #define GPIO_IGEP00X0_REVISION_DETECTION 129 /* Environment */ #define ENV_DEVICE_SETTINGS \ "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" #define MEM_LAYOUT_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ "scriptaddr=0x87E00000\0" \ "pxefile_addr_r=0x87F00000\0" #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) #include #define ENV_FINDFDT \ "findfdt="\ "if test ${board_name} = igep0020; then " \ "if test ${board_rev} = F; then " \ "setenv fdtfile omap3-igep0020-rev-f.dtb; " \ "else " \ "setenv fdtfile omap3-igep0020.dtb; fi; fi; " \ "if test ${board_name} = igep0030; then " \ "if test ${board_rev} = G; then " \ "setenv fdtfile omap3-igep0030-rev-g.dtb; " \ "else " \ "setenv fdtfile omap3-igep0030.dtb; fi; fi; " \ "if test ${fdtfile} = ''; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" #define CFG_EXTRA_ENV_SETTINGS \ ENV_FINDFDT \ ENV_DEVICE_SETTINGS \ MEM_LAYOUT_SETTINGS \ BOOTENV /* OneNAND config */ #define CFG_SYS_ONENAND_BASE ONENAND_MAP #define CFG_SYS_ONENAND_BLOCK_SIZE (128*1024) /* NAND config */ #define CFG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, \ 18, 19, 20, 21, 22, 23, 24, 25, \ 26, 27, 28, 29, 30, 31, 32, 33, \ 34, 35, 36, 37, 38, 39, 40, 41, \ 42, 43, 44, 45, 46, 47, 48, 49, \ 50, 51, 52, 53, 54, 55, 56, 57, } #define CFG_SYS_NAND_ECCSIZE 512 #define CFG_SYS_NAND_ECCBYTES 14 #endif /* __IGEP00X0_H */