// SPDX-License-Identifier: GPL-2.0+ /* * Display driver for Allwinner SoCs. * * (C) Copyright 2013-2014 Luc Verhaegen * (C) Copyright 2014-2015 Hans de Goede */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../videomodes.h" #include "../anx9804.h" #include "../hitachi_tx18d42vm_lcd.h" #include "../ssd2828.h" #include "simplefb_common.h" #ifdef CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW #define PWM_ON 0 #define PWM_OFF 1 #else #define PWM_ON 1 #define PWM_OFF 0 #endif DECLARE_GLOBAL_DATA_PTR; /* Maximum LCD size we support */ #define LCD_MAX_WIDTH 3840 #define LCD_MAX_HEIGHT 2160 #define LCD_MAX_LOG2_BPP VIDEO_BPP32 enum sunxi_monitor { sunxi_monitor_none, sunxi_monitor_dvi, sunxi_monitor_hdmi, sunxi_monitor_lcd, sunxi_monitor_vga, sunxi_monitor_composite_pal, sunxi_monitor_composite_ntsc, sunxi_monitor_composite_pal_m, sunxi_monitor_composite_pal_nc, }; #define SUNXI_MONITOR_LAST sunxi_monitor_composite_pal_nc struct sunxi_display_priv { enum sunxi_monitor monitor; unsigned int depth; unsigned int fb_addr; unsigned int fb_size; }; const struct ctfb_res_modes composite_video_modes[2] = { /* x y hz pixclk ps/kHz le ri up lo hs vs s vmode */ { 720, 576, 50, 37037, 27000, 137, 5, 20, 27, 2, 2, 0, FB_VMODE_INTERLACED }, { 720, 480, 60, 37037, 27000, 116, 20, 16, 27, 2, 2, 0, FB_VMODE_INTERLACED }, }; #ifdef CONFIG_VIDEO_HDMI /* * Wait up to 200ms for value to be set in given part of reg. */ static int await_completion(u32 *reg, u32 mask, u32 val) { unsigned long tmo = timer_get_us() + 200000; while ((readl(reg) & mask) != val) { if (timer_get_us() > tmo) { printf("DDC: timeout reading EDID\n"); return -ETIME; } } return 0; } static int sunxi_hdmi_hpd_detect(int hpd_delay) { struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_hdmi_reg * const hdmi = (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; unsigned long tmo = timer_get_us() + hpd_delay * 1000; /* Set pll3 to 300MHz */ clock_set_pll3(300000000); /* Set hdmi parent to pll3 */ clrsetbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_PLL_MASK, CCM_HDMI_CTRL_PLL3); /* Set ahb gating to pass */ #ifdef CONFIG_SUNXI_GEN_SUN6I setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI); #endif setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI); /* Clock on */ setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE); writel(SUNXI_HDMI_CTRL_ENABLE, &hdmi->ctrl); writel(SUNXI_HDMI_PAD_CTRL0_HDP, &hdmi->pad_ctrl0); /* Enable PLLs for eventual DDC */ writel(SUNXI_HDMI_PAD_CTRL1 | SUNXI_HDMI_PAD_CTRL1_HALVE, &hdmi->pad_ctrl1); writel(SUNXI_HDMI_PLL_CTRL | SUNXI_HDMI_PLL_CTRL_DIV(15), &hdmi->pll_ctrl); writel(SUNXI_HDMI_PLL_DBG0_PLL3, &hdmi->pll_dbg0); while (timer_get_us() < tmo) { if (readl(&hdmi->hpd) & SUNXI_HDMI_HPD_DETECT) return 1; } return 0; } static void sunxi_hdmi_shutdown(void) { struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_hdmi_reg * const hdmi = (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; clrbits_le32(&hdmi->ctrl, SUNXI_HDMI_CTRL_ENABLE); clrbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE); clrbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI); #ifdef CONFIG_SUNXI_GEN_SUN6I clrbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI); #endif clock_set_pll3(0); } static int sunxi_hdmi_ddc_do_command(u32 cmnd, int offset, int n) { struct sunxi_hdmi_reg * const hdmi = (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; setbits_le32(&hdmi->ddc_fifo_ctrl, SUNXI_HDMI_DDC_FIFO_CTRL_CLEAR); writel(SUNXI_HMDI_DDC_ADDR_EDDC_SEGMENT(offset >> 8) | SUNXI_HMDI_DDC_ADDR_EDDC_ADDR | SUNXI_HMDI_DDC_ADDR_OFFSET(offset) | SUNXI_HMDI_DDC_ADDR_SLAVE_ADDR, &hdmi->ddc_addr); #ifndef CONFIG_MACH_SUN6I writel(n, &hdmi->ddc_byte_count); writel(cmnd, &hdmi->ddc_cmnd); #else writel(n << 16 | cmnd, &hdmi->ddc_cmnd); #endif setbits_le32(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_START); return await_completion(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_START, 0); } static int sunxi_hdmi_ddc_read(int offset, u8 *buf, int count) { struct sunxi_hdmi_reg * const hdmi = (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; int i, n; while (count > 0) { if (count > 16) n = 16; else n = count; if (sunxi_hdmi_ddc_do_command( SUNXI_HDMI_DDC_CMND_EXPLICIT_EDDC_READ, offset, n)) return -ETIME; for (i = 0; i < n; i++) *buf++ = readb(&hdmi->ddc_fifo_data); offset += n; count -= n; } return 0; } static int sunxi_hdmi_edid_get_block(int block, u8 *buf) { int r, retries = 2; do { r = sunxi_hdmi_ddc_read(block * 128, buf, 128); if (r) continue; r = edid_check_checksum(buf); if (r) { printf("EDID block %d: checksum error%s\n", block, retries ? ", retrying" : ""); } } while (r && retries--); return r; } static int sunxi_hdmi_edid_get_mode(struct sunxi_display_priv *sunxi_display, struct ctfb_res_modes *mode, bool verbose_mode) { struct edid1_info edid1; struct edid_cea861_info cea681[4]; struct edid_detailed_timing *t = (struct edid_detailed_timing *)edid1.monitor_details.timing; struct sunxi_hdmi_reg * const hdmi = (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; int i, r, ext_blocks = 0; /* Reset i2c controller */ setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_DDC_GATE); writel(SUNXI_HMDI_DDC_CTRL_ENABLE | SUNXI_HMDI_DDC_CTRL_SDA_ENABLE | SUNXI_HMDI_DDC_CTRL_SCL_ENABLE | SUNXI_HMDI_DDC_CTRL_RESET, &hdmi->ddc_ctrl); if (await_completion(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_RESET, 0)) return -EIO; writel(SUNXI_HDMI_DDC_CLOCK, &hdmi->ddc_clock); #ifndef CONFIG_MACH_SUN6I writel(SUNXI_HMDI_DDC_LINE_CTRL_SDA_ENABLE | SUNXI_HMDI_DDC_LINE_CTRL_SCL_ENABLE, &hdmi->ddc_line_ctrl); #endif r = sunxi_hdmi_edid_get_block(0, (u8 *)&edid1); if (r == 0) { r = edid_check_info(&edid1); if (r) { if (verbose_mode) printf("EDID: invalid EDID data\n"); r = -EINVAL; } } if (r == 0) { ext_blocks = edid1.extension_flag; if (ext_blocks > 4) ext_blocks = 4; for (i = 0; i < ext_blocks; i++) { if (sunxi_hdmi_edid_get_block(1 + i, (u8 *)&cea681[i]) != 0) { ext_blocks = i; break; } } } /* Disable DDC engine, no longer needed */ clrbits_le32(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_ENABLE); clrbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_DDC_GATE); if (r) return r; /* We want version 1.3 or 1.2 with detailed timing info */ if (edid1.version != 1 || (edid1.revision < 3 && !EDID1_INFO_FEATURE_PREFERRED_TIMING_MODE(edid1))) { printf("EDID: unsupported version %d.%d\n", edid1.version, edid1.revision); return -EINVAL; } /* Take the first usable detailed timing */ for (i = 0; i < 4; i++, t++) { r = video_edid_dtd_to_ctfb_res_modes(t, mode); if (r == 0) break; } if (i == 4) { printf("EDID: no usable detailed timing found\n"); return -ENOENT; } /* Check for basic audio support, if found enable hdmi output */ sunxi_display->monitor = sunxi_monitor_dvi; for (i = 0; i < ext_blocks; i++) { if (cea681[i].extension_tag != EDID_CEA861_EXTENSION_TAG || cea681[i].revision < 2) continue; if (EDID_CEA861_SUPPORTS_BASIC_AUDIO(cea681[i])) sunxi_display->monitor = sunxi_monitor_hdmi; } return 0; } #endif /* CONFIG_VIDEO_HDMI */ #ifdef CONFIG_MACH_SUN4I /* * Testing has shown that on sun4i the display backend engine does not have * deep enough fifo-s causing flickering / tearing in full-hd mode due to * fifo underruns. So on sun4i we use the display frontend engine to do the * dma from memory, as the frontend does have deep enough fifo-s. */ static const u32 sun4i_vert_coef[32] = { 0x00004000, 0x000140ff, 0x00033ffe, 0x00043ffd, 0x00063efc, 0xff083dfc, 0x000a3bfb, 0xff0d39fb, 0xff0f37fb, 0xff1136fa, 0xfe1433fb, 0xfe1631fb, 0xfd192ffb, 0xfd1c2cfb, 0xfd1f29fb, 0xfc2127fc, 0xfc2424fc, 0xfc2721fc, 0xfb291ffd, 0xfb2c1cfd, 0xfb2f19fd, 0xfb3116fe, 0xfb3314fe, 0xfa3611ff, 0xfb370fff, 0xfb390dff, 0xfb3b0a00, 0xfc3d08ff, 0xfc3e0600, 0xfd3f0400, 0xfe3f0300, 0xff400100, }; static const u32 sun4i_horz_coef[64] = { 0x40000000, 0x00000000, 0x40fe0000, 0x0000ff03, 0x3ffd0000, 0x0000ff05, 0x3ffc0000, 0x0000ff06, 0x3efb0000, 0x0000ff08, 0x3dfb0000, 0x0000ff09, 0x3bfa0000, 0x0000fe0d, 0x39fa0000, 0x0000fe0f, 0x38fa0000, 0x0000fe10, 0x36fa0000, 0x0000fe12, 0x33fa0000, 0x0000fd16, 0x31fa0000, 0x0000fd18, 0x2ffa0000, 0x0000fd1a, 0x2cfa0000, 0x0000fc1e, 0x29fa0000, 0x0000fc21, 0x27fb0000, 0x0000fb23, 0x24fb0000, 0x0000fb26, 0x21fb0000, 0x0000fb29, 0x1ffc0000, 0x0000fa2b, 0x1cfc0000, 0x0000fa2e, 0x19fd0000, 0x0000fa30, 0x16fd0000, 0x0000fa33, 0x14fd0000, 0x0000fa35, 0x11fe0000, 0x0000fa37, 0x0ffe0000, 0x0000fa39, 0x0dfe0000, 0x0000fa3b, 0x0afe0000, 0x0000fa3e, 0x08ff0000, 0x0000fb3e, 0x06ff0000, 0x0000fb40, 0x05ff0000, 0x0000fc40, 0x03ff0000, 0x0000fd41, 0x01ff0000, 0x0000fe42, }; static void sunxi_frontend_init(void) { struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_de_fe_reg * const de_fe = (struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE; int i; /* Clocks on */ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_FE0); setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_FE0); clock_set_de_mod_clock(&ccm->fe0_clk_cfg, 300000000); setbits_le32(&de_fe->enable, SUNXI_DE_FE_ENABLE_EN); for (i = 0; i < 32; i++) { writel(sun4i_horz_coef[2 * i], &de_fe->ch0_horzcoef0[i]); writel(sun4i_horz_coef[2 * i + 1], &de_fe->ch0_horzcoef1[i]); writel(sun4i_vert_coef[i], &de_fe->ch0_vertcoef[i]); writel(sun4i_horz_coef[2 * i], &de_fe->ch1_horzcoef0[i]); writel(sun4i_horz_coef[2 * i + 1], &de_fe->ch1_horzcoef1[i]); writel(sun4i_vert_coef[i], &de_fe->ch1_vertcoef[i]); } setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_COEF_RDY); } static void sunxi_frontend_mode_set(const struct ctfb_res_modes *mode, unsigned int address) { struct sunxi_de_fe_reg * const de_fe = (struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE; setbits_le32(&de_fe->bypass, SUNXI_DE_FE_BYPASS_CSC_BYPASS); writel(CFG_SYS_SDRAM_BASE + address, &de_fe->ch0_addr); writel(mode->xres * 4, &de_fe->ch0_stride); writel(SUNXI_DE_FE_INPUT_FMT_ARGB8888, &de_fe->input_fmt); writel(SUNXI_DE_FE_OUTPUT_FMT_ARGB8888, &de_fe->output_fmt); writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres), &de_fe->ch0_insize); writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres), &de_fe->ch0_outsize); writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch0_horzfact); writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch0_vertfact); writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres), &de_fe->ch1_insize); writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres), &de_fe->ch1_outsize); writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch1_horzfact); writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch1_vertfact); setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_REG_RDY); } static void sunxi_frontend_enable(void) { struct sunxi_de_fe_reg * const de_fe = (struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE; setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_FRM_START); } #else static void sunxi_frontend_init(void) {} static void sunxi_frontend_mode_set(const struct ctfb_res_modes *mode, unsigned int address) {} static void sunxi_frontend_enable(void) {} #endif static bool sunxi_is_composite(enum sunxi_monitor monitor) { switch (monitor) { case sunxi_monitor_none: case sunxi_monitor_dvi: case sunxi_monitor_hdmi: case sunxi_monitor_lcd: case sunxi_monitor_vga: return false; case sunxi_monitor_composite_pal: case sunxi_monitor_composite_ntsc: case sunxi_monitor_composite_pal_m: case sunxi_monitor_composite_pal_nc: return true; } return false; /* Never reached */ } /* * This is the entity that mixes and matches the different layers and inputs. * Allwinner calls it the back-end, but i like composer better. */ static void sunxi_composer_init(void) { struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_de_be_reg * const de_be = (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; int i; sunxi_frontend_init(); #ifdef CONFIG_SUNXI_GEN_SUN6I /* Reset off */ setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DE_BE0); #endif /* Clocks on */ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_BE0); #ifndef CONFIG_MACH_SUN4I /* On sun4i the frontend does the dma */ setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_BE0); #endif clock_set_de_mod_clock(&ccm->be0_clk_cfg, 300000000); /* Engine bug, clear registers after reset */ for (i = 0x0800; i < 0x1000; i += 4) writel(0, SUNXI_DE_BE0_BASE + i); setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_ENABLE); } static const u32 sunxi_rgb2yuv_coef[12] = { 0x00000107, 0x00000204, 0x00000064, 0x00000108, 0x00003f69, 0x00003ed6, 0x000001c1, 0x00000808, 0x000001c1, 0x00003e88, 0x00003fb8, 0x00000808 }; static void sunxi_composer_mode_set(const struct ctfb_res_modes *mode, unsigned int address, enum sunxi_monitor monitor) { struct sunxi_de_be_reg * const de_be = (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; int i; sunxi_frontend_mode_set(mode, address); writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres), &de_be->disp_size); writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres), &de_be->layer0_size); #ifndef CONFIG_MACH_SUN4I /* On sun4i the frontend does the dma */ writel(SUNXI_DE_BE_LAYER_STRIDE(mode->xres), &de_be->layer0_stride); writel(address << 3, &de_be->layer0_addr_low32b); writel(address >> 29, &de_be->layer0_addr_high4b); #else writel(SUNXI_DE_BE_LAYER_ATTR0_SRC_FE0, &de_be->layer0_attr0_ctrl); #endif writel(SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888, &de_be->layer0_attr1_ctrl); setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_LAYER0_ENABLE); if (mode->vmode == FB_VMODE_INTERLACED) setbits_le32(&de_be->mode, #ifndef CONFIG_MACH_SUN5I SUNXI_DE_BE_MODE_DEFLICKER_ENABLE | #endif SUNXI_DE_BE_MODE_INTERLACE_ENABLE); if (sunxi_is_composite(monitor)) { writel(SUNXI_DE_BE_OUTPUT_COLOR_CTRL_ENABLE, &de_be->output_color_ctrl); for (i = 0; i < 12; i++) writel(sunxi_rgb2yuv_coef[i], &de_be->output_color_coef[i]); } } static void sunxi_composer_enable(void) { struct sunxi_de_be_reg * const de_be = (struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE; sunxi_frontend_enable(); setbits_le32(&de_be->reg_ctrl, SUNXI_DE_BE_REG_CTRL_LOAD_REGS); setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START); } static void sunxi_lcdc_init(void) { struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_lcdc_reg * const lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; /* Reset off */ #ifdef CONFIG_SUNXI_GEN_SUN6I setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0); #else setbits_le32(&ccm->lcd0_ch0_clk_cfg, CCM_LCD_CH0_CTRL_RST); #endif /* Clock on */ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0); #ifdef CONFIG_VIDEO_LCD_IF_LVDS #ifdef CONFIG_SUNXI_GEN_SUN6I setbits_le32(&ccm->ahb_reset2_cfg, 1 << AHB_RESET_OFFSET_LVDS); #else setbits_le32(&ccm->lvds_clk_cfg, CCM_LVDS_CTRL_RST); #endif #endif lcdc_init(lcdc); } static void sunxi_lcdc_panel_enable(void) { int pin, reset_pin; /* * Start with backlight disabled to avoid the screen flashing to * white while the lcd inits. */ pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_EN); if (pin >= 0) { gpio_request(pin, "lcd_backlight_enable"); gpio_direction_output(pin, 0); } pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM); if (pin >= 0) { gpio_request(pin, "lcd_backlight_pwm"); gpio_direction_output(pin, PWM_OFF); } reset_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_RESET); if (reset_pin >= 0) { gpio_request(reset_pin, "lcd_reset"); gpio_direction_output(reset_pin, 0); /* Assert reset */ } /* Give the backlight some time to turn off and power up the panel. */ mdelay(40); pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_POWER); if (pin >= 0) { gpio_request(pin, "lcd_power"); gpio_direction_output(pin, 1); } if (reset_pin >= 0) gpio_direction_output(reset_pin, 1); /* De-assert reset */ } static void sunxi_lcdc_backlight_enable(void) { int pin; /* * We want to have scanned out at least one frame before enabling the * backlight to avoid the screen flashing to white when we enable it. */ mdelay(40); pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_EN); if (pin >= 0) gpio_direction_output(pin, 1); pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM); #ifdef SUNXI_PWM_PIN0 if (pin == SUNXI_PWM_PIN0) { writel(SUNXI_PWM_CTRL_POLARITY0(PWM_ON) | SUNXI_PWM_CTRL_ENABLE0 | SUNXI_PWM_CTRL_PRESCALE0(0xf), SUNXI_PWM_CTRL_REG); writel(SUNXI_PWM_PERIOD_80PCT, SUNXI_PWM_CH0_PERIOD); sunxi_gpio_set_cfgpin(pin, SUNXI_PWM_MUX); return; } #endif if (pin >= 0) gpio_direction_output(pin, PWM_ON); } static void sunxi_lcdc_tcon0_mode_set(struct sunxi_display_priv *sunxi_display, const struct ctfb_res_modes *mode, bool for_ext_vga_dac) { struct sunxi_lcdc_reg * const lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; int clk_div, clk_double, pin; struct display_timing timing; #if defined CONFIG_MACH_SUN8I && defined CONFIG_VIDEO_LCD_IF_LVDS for (pin = SUNXI_GPD(18); pin <= SUNXI_GPD(27); pin++) { #else for (pin = SUNXI_GPD(0); pin <= SUNXI_GPD(27); pin++) { #endif #ifdef CONFIG_VIDEO_LCD_IF_PARALLEL sunxi_gpio_set_cfgpin(pin, SUNXI_GPD_LCD0); #endif #ifdef CONFIG_VIDEO_LCD_IF_LVDS sunxi_gpio_set_cfgpin(pin, SUNXI_GPD_LVDS0); #endif #ifdef CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804 sunxi_gpio_set_drv(pin, 3); #endif } lcdc_pll_set(ccm, 0, mode->pixclock_khz, &clk_div, &clk_double, sunxi_is_composite(sunxi_display->monitor)); video_ctfb_mode_to_display_timing(mode, &timing); lcdc_tcon0_mode_set(lcdc, &timing, clk_div, for_ext_vga_dac, sunxi_display->depth, CONFIG_VIDEO_LCD_DCLK_PHASE); } #if defined CONFIG_VIDEO_HDMI || defined CONFIG_VIDEO_VGA || defined CONFIG_VIDEO_COMPOSITE static void sunxi_lcdc_tcon1_mode_set(const struct ctfb_res_modes *mode, int *clk_div, int *clk_double, bool use_portd_hvsync, enum sunxi_monitor monitor) { struct sunxi_lcdc_reg * const lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct display_timing timing; video_ctfb_mode_to_display_timing(mode, &timing); lcdc_tcon1_mode_set(lcdc, &timing, use_portd_hvsync, sunxi_is_composite(monitor)); if (use_portd_hvsync) { sunxi_gpio_set_cfgpin(SUNXI_GPD(26), SUNXI_GPD_LCD0); sunxi_gpio_set_cfgpin(SUNXI_GPD(27), SUNXI_GPD_LCD0); } lcdc_pll_set(ccm, 1, mode->pixclock_khz, clk_div, clk_double, sunxi_is_composite(monitor)); } #endif /* CONFIG_VIDEO_HDMI || defined CONFIG_VIDEO_VGA || CONFIG_VIDEO_COMPOSITE */ #ifdef CONFIG_VIDEO_HDMI static void sunxi_hdmi_setup_info_frames(const struct ctfb_res_modes *mode) { struct sunxi_hdmi_reg * const hdmi = (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; u8 checksum = 0; u8 avi_info_frame[17] = { 0x82, 0x02, 0x0d, 0x00, 0x12, 0x00, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; u8 vendor_info_frame[19] = { 0x81, 0x01, 0x06, 0x29, 0x03, 0x0c, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; int i; if (mode->pixclock_khz <= 27000) avi_info_frame[5] = 0x40; /* SD-modes, ITU601 colorspace */ else avi_info_frame[5] = 0x80; /* HD-modes, ITU709 colorspace */ if (mode->xres * 100 / mode->yres < 156) avi_info_frame[5] |= 0x18; /* 4 : 3 */ else avi_info_frame[5] |= 0x28; /* 16 : 9 */ for (i = 0; i < ARRAY_SIZE(avi_info_frame); i++) checksum += avi_info_frame[i]; avi_info_frame[3] = 0x100 - checksum; for (i = 0; i < ARRAY_SIZE(avi_info_frame); i++) writeb(avi_info_frame[i], &hdmi->avi_info_frame[i]); writel(SUNXI_HDMI_QCP_PACKET0, &hdmi->qcp_packet0); writel(SUNXI_HDMI_QCP_PACKET1, &hdmi->qcp_packet1); for (i = 0; i < ARRAY_SIZE(vendor_info_frame); i++) writeb(vendor_info_frame[i], &hdmi->vendor_info_frame[i]); writel(SUNXI_HDMI_PKT_CTRL0, &hdmi->pkt_ctrl0); writel(SUNXI_HDMI_PKT_CTRL1, &hdmi->pkt_ctrl1); setbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_HDMI); } static void sunxi_hdmi_mode_set(const struct ctfb_res_modes *mode, int clk_div, int clk_double, enum sunxi_monitor monitor) { struct sunxi_hdmi_reg * const hdmi = (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; int x, y; /* Write clear interrupt status bits */ writel(SUNXI_HDMI_IRQ_STATUS_BITS, &hdmi->irq); if (monitor == sunxi_monitor_hdmi) sunxi_hdmi_setup_info_frames(mode); /* Set input sync enable */ writel(SUNXI_HDMI_UNKNOWN_INPUT_SYNC, &hdmi->unknown); /* Init various registers, select pll3 as clock source */ writel(SUNXI_HDMI_VIDEO_POL_TX_CLK, &hdmi->video_polarity); writel(SUNXI_HDMI_PAD_CTRL0_RUN, &hdmi->pad_ctrl0); writel(SUNXI_HDMI_PAD_CTRL1, &hdmi->pad_ctrl1); writel(SUNXI_HDMI_PLL_CTRL, &hdmi->pll_ctrl); writel(SUNXI_HDMI_PLL_DBG0_PLL3, &hdmi->pll_dbg0); /* Setup clk div and doubler */ clrsetbits_le32(&hdmi->pll_ctrl, SUNXI_HDMI_PLL_CTRL_DIV_MASK, SUNXI_HDMI_PLL_CTRL_DIV(clk_div)); if (!clk_double) setbits_le32(&hdmi->pad_ctrl1, SUNXI_HDMI_PAD_CTRL1_HALVE); /* Setup timing registers */ writel(SUNXI_HDMI_Y(mode->yres) | SUNXI_HDMI_X(mode->xres), &hdmi->video_size); x = mode->hsync_len + mode->left_margin; y = mode->vsync_len + mode->upper_margin; writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_bp); x = mode->right_margin; y = mode->lower_margin; writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_fp); x = mode->hsync_len; y = mode->vsync_len; writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_spw); if (mode->sync & FB_SYNC_HOR_HIGH_ACT) setbits_le32(&hdmi->video_polarity, SUNXI_HDMI_VIDEO_POL_HOR); if (mode->sync & FB_SYNC_VERT_HIGH_ACT) setbits_le32(&hdmi->video_polarity, SUNXI_HDMI_VIDEO_POL_VER); } static void sunxi_hdmi_enable(void) { struct sunxi_hdmi_reg * const hdmi = (struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE; udelay(100); setbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE); } #endif /* CONFIG_VIDEO_HDMI */ #if defined CONFIG_VIDEO_VGA || defined CONFIG_VIDEO_COMPOSITE static void sunxi_tvencoder_mode_set(enum sunxi_monitor monitor) { struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_tve_reg * const tve = (struct sunxi_tve_reg *)SUNXI_TVE0_BASE; /* Reset off */ setbits_le32(&ccm->lcd0_ch0_clk_cfg, CCM_LCD_CH0_CTRL_TVE_RST); /* Clock on */ setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_TVE0); switch (monitor) { case sunxi_monitor_vga: tvencoder_mode_set(tve, tve_mode_vga); break; case sunxi_monitor_composite_pal_nc: tvencoder_mode_set(tve, tve_mode_composite_pal_nc); break; case sunxi_monitor_composite_pal: tvencoder_mode_set(tve, tve_mode_composite_pal); break; case sunxi_monitor_composite_pal_m: tvencoder_mode_set(tve, tve_mode_composite_pal_m); break; case sunxi_monitor_composite_ntsc: tvencoder_mode_set(tve, tve_mode_composite_ntsc); break; case sunxi_monitor_none: case sunxi_monitor_dvi: case sunxi_monitor_hdmi: case sunxi_monitor_lcd: break; } } #endif /* CONFIG_VIDEO_VGA || defined CONFIG_VIDEO_COMPOSITE */ static void sunxi_drc_init(void) { #ifdef CONFIG_SUNXI_GEN_SUN6I struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; /* On sun6i the drc must be clocked even when in pass-through mode */ #ifdef CONFIG_MACH_SUN8I_A33 setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_SAT); #endif setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DRC0); clock_set_de_mod_clock(&ccm->iep_drc0_clk_cfg, 300000000); #endif } #ifdef CONFIG_VIDEO_VGA_VIA_LCD static void sunxi_vga_external_dac_enable(void) { int pin; pin = sunxi_name_to_gpio(CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN); if (pin >= 0) { gpio_request(pin, "vga_enable"); gpio_direction_output(pin, 1); } } #endif /* CONFIG_VIDEO_VGA_VIA_LCD */ #ifdef CONFIG_VIDEO_LCD_SSD2828 static int sunxi_ssd2828_init(const struct ctfb_res_modes *mode) { struct ssd2828_config cfg = { .csx_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_SPI_CS), .sck_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_SPI_SCLK), .sdi_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_SPI_MOSI), .sdo_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_SPI_MISO), .reset_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_SSD2828_RESET), .ssd2828_tx_clk_khz = CONFIG_VIDEO_LCD_SSD2828_TX_CLK * 1000, .ssd2828_color_depth = 24, #ifdef CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828 .mipi_dsi_number_of_data_lanes = 4, .mipi_dsi_bitrate_per_data_lane_mbps = 513, .mipi_dsi_delay_after_exit_sleep_mode_ms = 100, .mipi_dsi_delay_after_set_display_on_ms = 200 #else #error MIPI LCD panel needs configuration parameters #endif }; if (cfg.csx_pin == -1 || cfg.sck_pin == -1 || cfg.sdi_pin == -1) { printf("SSD2828: SPI pins are not properly configured\n"); return 1; } if (cfg.reset_pin == -1) { printf("SSD2828: Reset pin is not properly configured\n"); return 1; } return ssd2828_init(&cfg, mode); } #endif /* CONFIG_VIDEO_LCD_SSD2828 */ #ifdef CONFIG_VIDEO_LCD_PANEL_I2C static void sunxi_panel_i2c_init(struct sunxi_display_priv *sunxi_display) { const char *name = CONFIG_VIDEO_LCD_PANEL_I2C_NAME; struct udevice *i2c_bus; int ret; ret = uclass_get_device_by_name(UCLASS_I2C, name, &i2c_bus); if (ret) return; if (IS_ENABLED(CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804)) { /* * The anx9804 needs 1.8V from eldo3, we do this here * and not via CONFIG_AXP_ELDO3_VOLT from board_init() * to avoid turning this on when using hdmi output. */ axp_set_eldo(3, 1800); anx9804_init(i2c_bus, 4, ANX9804_DATA_RATE_1620M, sunxi_display->depth); } if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) { struct udevice *chip; ret = i2c_get_chip(i2c_bus, 0x5c, 1, &chip); if (ret) return; dm_i2c_reg_write(chip, 0x04, 0x42); /* Turn on the LCD */ } } #else static void sunxi_panel_i2c_init(struct sunxi_display_priv *sunxi_display) {} #endif static void sunxi_engines_init(void) { sunxi_composer_init(); sunxi_lcdc_init(); sunxi_drc_init(); } static void sunxi_mode_set(struct sunxi_display_priv *sunxi_display, const struct ctfb_res_modes *mode, unsigned int address) { enum sunxi_monitor monitor = sunxi_display->monitor; int __maybe_unused clk_div, clk_double; struct sunxi_lcdc_reg * const lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; struct sunxi_tve_reg * __maybe_unused const tve = (struct sunxi_tve_reg *)SUNXI_TVE0_BASE; switch (sunxi_display->monitor) { case sunxi_monitor_none: break; case sunxi_monitor_dvi: case sunxi_monitor_hdmi: #ifdef CONFIG_VIDEO_HDMI sunxi_composer_mode_set(mode, address, monitor); sunxi_lcdc_tcon1_mode_set(mode, &clk_div, &clk_double, 0, monitor); sunxi_hdmi_mode_set(mode, clk_div, clk_double, monitor); sunxi_composer_enable(); lcdc_enable(lcdc, sunxi_display->depth); sunxi_hdmi_enable(); #endif break; case sunxi_monitor_lcd: sunxi_lcdc_panel_enable(); if (IS_ENABLED(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM)) { mdelay(50); /* Wait for lcd controller power on */ hitachi_tx18d42vm_init(); } if (IS_ENABLED(CONFIG_VIDEO_LCD_PANEL_I2C)) sunxi_panel_i2c_init(sunxi_display); sunxi_composer_mode_set(mode, address, monitor); sunxi_lcdc_tcon0_mode_set(sunxi_display, mode, false); sunxi_composer_enable(); lcdc_enable(lcdc, sunxi_display->depth); #ifdef CONFIG_VIDEO_LCD_SSD2828 sunxi_ssd2828_init(mode); #endif sunxi_lcdc_backlight_enable(); break; case sunxi_monitor_vga: #ifdef CONFIG_VIDEO_VGA sunxi_composer_mode_set(mode, address, monitor); sunxi_lcdc_tcon1_mode_set(mode, &clk_div, &clk_double, 1, monitor); sunxi_tvencoder_mode_set(monitor); sunxi_composer_enable(); lcdc_enable(lcdc, sunxi_display->depth); tvencoder_enable(tve); #elif defined CONFIG_VIDEO_VGA_VIA_LCD sunxi_composer_mode_set(mode, address, monitor); sunxi_lcdc_tcon0_mode_set(sunxi_display, mode, true); sunxi_composer_enable(); lcdc_enable(lcdc, sunxi_display->depth); sunxi_vga_external_dac_enable(); #endif break; case sunxi_monitor_composite_pal: case sunxi_monitor_composite_ntsc: case sunxi_monitor_composite_pal_m: case sunxi_monitor_composite_pal_nc: #ifdef CONFIG_VIDEO_COMPOSITE sunxi_composer_mode_set(mode, address, monitor); sunxi_lcdc_tcon1_mode_set(mode, &clk_div, &clk_double, 0, monitor); sunxi_tvencoder_mode_set(monitor); sunxi_composer_enable(); lcdc_enable(lcdc, sunxi_display->depth); tvencoder_enable(tve); #endif break; } } static const char *sunxi_get_mon_desc(enum sunxi_monitor monitor) { switch (monitor) { case sunxi_monitor_dvi: return "dvi"; case sunxi_monitor_hdmi: return "hdmi"; case sunxi_monitor_lcd: return "lcd"; case sunxi_monitor_vga: return "vga"; case sunxi_monitor_composite_pal: return "composite-pal"; case sunxi_monitor_composite_ntsc: return "composite-ntsc"; case sunxi_monitor_composite_pal_m: return "composite-pal-m"; case sunxi_monitor_composite_pal_nc: return "composite-pal-nc"; case sunxi_monitor_none: /* fall through */ default: return "none"; } } static bool sunxi_has_hdmi(void) { #ifdef CONFIG_VIDEO_HDMI return true; #else return false; #endif } static bool sunxi_has_lcd(void) { char *lcd_mode = CONFIG_VIDEO_LCD_MODE; return lcd_mode[0] != 0; } static bool sunxi_has_vga(void) { #if defined CONFIG_VIDEO_VGA || defined CONFIG_VIDEO_VGA_VIA_LCD return true; #else return false; #endif } static bool sunxi_has_composite(void) { #ifdef CONFIG_VIDEO_COMPOSITE return true; #else return false; #endif } static enum sunxi_monitor sunxi_get_default_mon(bool allow_hdmi) { if (allow_hdmi && sunxi_has_hdmi()) return sunxi_monitor_dvi; else if (sunxi_has_lcd()) return sunxi_monitor_lcd; else if (sunxi_has_vga()) return sunxi_monitor_vga; else if (sunxi_has_composite()) return sunxi_monitor_composite_pal; else return sunxi_monitor_none; } static int sunxi_de_probe(struct udevice *dev) { struct video_priv *uc_priv = dev_get_uclass_priv(dev); struct video_uc_plat *plat = dev_get_uclass_plat(dev); struct sunxi_display_priv *sunxi_display = dev_get_priv(dev); const struct ctfb_res_modes *mode; struct ctfb_res_modes custom; const char *options; #ifdef CONFIG_VIDEO_HDMI int hpd, hpd_delay, edid; bool hdmi_present; #endif int i, overscan_offset, overscan_x, overscan_y; unsigned int fb_dma_addr; char mon[16]; char *lcd_mode = CONFIG_VIDEO_LCD_MODE; video_get_ctfb_res_modes(RES_MODE_1024x768, 24, &mode, &sunxi_display->depth, &options); #ifdef CONFIG_VIDEO_HDMI hpd = video_get_option_int(options, "hpd", 1); hpd_delay = video_get_option_int(options, "hpd_delay", 500); edid = video_get_option_int(options, "edid", 1); #endif overscan_x = video_get_option_int(options, "overscan_x", -1); overscan_y = video_get_option_int(options, "overscan_y", -1); sunxi_display->monitor = sunxi_get_default_mon(true); video_get_option_string(options, "monitor", mon, sizeof(mon), sunxi_get_mon_desc(sunxi_display->monitor)); for (i = 0; i <= SUNXI_MONITOR_LAST; i++) { if (strcmp(mon, sunxi_get_mon_desc(i)) == 0) { sunxi_display->monitor = i; break; } } if (i > SUNXI_MONITOR_LAST) printf("Unknown monitor: '%s', falling back to '%s'\n", mon, sunxi_get_mon_desc(sunxi_display->monitor)); #ifdef CONFIG_VIDEO_HDMI /* If HDMI/DVI is selected do HPD & EDID, and handle fallback */ if (sunxi_display->monitor == sunxi_monitor_dvi || sunxi_display->monitor == sunxi_monitor_hdmi) { /* Always call hdp_detect, as it also enables clocks, etc. */ hdmi_present = (sunxi_hdmi_hpd_detect(hpd_delay) == 1); if (hdmi_present && edid) { printf("HDMI connected: "); if (sunxi_hdmi_edid_get_mode(sunxi_display, &custom, true) == 0) mode = &custom; else hdmi_present = false; } /* Fall back to EDID in case HPD failed */ if (edid && !hdmi_present) { if (sunxi_hdmi_edid_get_mode(sunxi_display, &custom, false) == 0) { mode = &custom; hdmi_present = true; } } /* Shut down when display was not found */ if ((hpd || edid) && !hdmi_present) { sunxi_hdmi_shutdown(); sunxi_display->monitor = sunxi_get_default_mon(false); } /* else continue with hdmi/dvi without a cable connected */ } #endif switch (sunxi_display->monitor) { case sunxi_monitor_none: printf("Unknown monitor\n"); return -EINVAL; case sunxi_monitor_dvi: case sunxi_monitor_hdmi: if (!sunxi_has_hdmi()) { printf("HDMI/DVI not supported on this board\n"); sunxi_display->monitor = sunxi_monitor_none; return -EINVAL; } break; case sunxi_monitor_lcd: if (!sunxi_has_lcd()) { printf("LCD not supported on this board\n"); sunxi_display->monitor = sunxi_monitor_none; return -EINVAL; } sunxi_display->depth = video_get_params(&custom, lcd_mode); mode = &custom; break; case sunxi_monitor_vga: if (!sunxi_has_vga()) { printf("VGA not supported on this board\n"); sunxi_display->monitor = sunxi_monitor_none; return -EINVAL; } sunxi_display->depth = 18; break; case sunxi_monitor_composite_pal: case sunxi_monitor_composite_ntsc: case sunxi_monitor_composite_pal_m: case sunxi_monitor_composite_pal_nc: if (!sunxi_has_composite()) { printf("Composite video not supported on this board\n"); sunxi_display->monitor = sunxi_monitor_none; return -EINVAL; } if (sunxi_display->monitor == sunxi_monitor_composite_pal || sunxi_display->monitor == sunxi_monitor_composite_pal_nc) mode = &composite_video_modes[0]; else mode = &composite_video_modes[1]; sunxi_display->depth = 24; break; } /* Yes these defaults are quite high, overscan on composite sucks... */ if (overscan_x == -1) overscan_x = sunxi_is_composite(sunxi_display->monitor) ? 32 : 0; if (overscan_y == -1) overscan_y = sunxi_is_composite(sunxi_display->monitor) ? 20 : 0; sunxi_display->fb_size = plat->size; overscan_offset = (overscan_y * mode->xres + overscan_x) * 4; /* We want to keep the fb_base for simplefb page aligned, where as * the sunxi dma engines will happily accept an unaligned address. */ if (overscan_offset) sunxi_display->fb_size += 0x1000; printf("Setting up a %dx%d%s %s console (overscan %dx%d)\n", mode->xres, mode->yres, (mode->vmode == FB_VMODE_INTERLACED) ? "i" : "", sunxi_get_mon_desc(sunxi_display->monitor), overscan_x, overscan_y); sunxi_display->fb_addr = plat->base; sunxi_engines_init(); #ifdef CONFIG_EFI_LOADER efi_add_memory_map(sunxi_display->fb_addr, sunxi_display->fb_size, EFI_RESERVED_MEMORY_TYPE); #endif fb_dma_addr = sunxi_display->fb_addr - CFG_SYS_SDRAM_BASE; if (overscan_offset) { fb_dma_addr += 0x1000 - (overscan_offset & 0xfff); sunxi_display->fb_addr += ALIGN(overscan_offset, 0x1000); memset((void *)sunxi_display->fb_addr, 0, sunxi_display->fb_size); flush_cache(sunxi_display->fb_addr, sunxi_display->fb_size); } sunxi_mode_set(sunxi_display, mode, fb_dma_addr); /* The members of struct video_priv to be set by the driver. */ uc_priv->bpix = VIDEO_BPP32; uc_priv->xsize = mode->xres; uc_priv->ysize = mode->yres; video_set_flush_dcache(dev, true); return 0; } static int sunxi_de_bind(struct udevice *dev) { struct video_uc_plat *plat = dev_get_uclass_plat(dev); plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT * VNBYTES(LCD_MAX_LOG2_BPP); return 0; } static const struct video_ops sunxi_de_ops = { }; U_BOOT_DRIVER(sunxi_de) = { .name = "sunxi_de", .id = UCLASS_VIDEO, .ops = &sunxi_de_ops, .bind = sunxi_de_bind, .probe = sunxi_de_probe, .priv_auto = sizeof(struct sunxi_display_priv), .flags = DM_FLAG_PRE_RELOC, }; U_BOOT_DRVINFO(sunxi_de) = { .name = "sunxi_de" }; /* * Simplefb support. */ #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_VIDEO_DT_SIMPLEFB) int sunxi_simplefb_setup(void *blob) { struct sunxi_display_priv *sunxi_display; struct video_priv *uc_priv; struct udevice *de; int offset, ret; u64 start, size; const char *pipeline = NULL; #ifdef CONFIG_MACH_SUN4I #define PIPELINE_PREFIX "de_fe0-" #else #define PIPELINE_PREFIX #endif ret = uclass_find_device_by_name(UCLASS_VIDEO, "sunxi_de", &de); if (ret) { printf("DE not present\n"); return 0; } else if (!device_active(de)) { printf("DE is present but not probed\n"); return 0; } uc_priv = dev_get_uclass_priv(de); sunxi_display = dev_get_priv(de); switch (sunxi_display->monitor) { case sunxi_monitor_none: return 0; case sunxi_monitor_dvi: case sunxi_monitor_hdmi: pipeline = PIPELINE_PREFIX "de_be0-lcd0-hdmi"; break; case sunxi_monitor_lcd: pipeline = PIPELINE_PREFIX "de_be0-lcd0"; break; case sunxi_monitor_vga: #ifdef CONFIG_VIDEO_VGA pipeline = PIPELINE_PREFIX "de_be0-lcd0-tve0"; #elif defined CONFIG_VIDEO_VGA_VIA_LCD pipeline = PIPELINE_PREFIX "de_be0-lcd0"; #endif break; case sunxi_monitor_composite_pal: case sunxi_monitor_composite_ntsc: case sunxi_monitor_composite_pal_m: case sunxi_monitor_composite_pal_nc: pipeline = PIPELINE_PREFIX "de_be0-lcd0-tve0"; break; } offset = sunxi_simplefb_fdt_match(blob, pipeline); if (offset < 0) { eprintf("Cannot setup simplefb: node not found\n"); return 0; /* Keep older kernels working */ } /* * Do not report the framebuffer as free RAM to the OS, note we cannot * use fdt_add_mem_rsv() here, because then it is still seen as RAM, * and e.g. Linux refuses to iomap RAM on ARM, see: * linux/arch/arm/mm/ioremap.c around line 301. */ start = gd->bd->bi_dram[0].start; size = sunxi_display->fb_addr - start; ret = fdt_fixup_memory_banks(blob, &start, &size, 1); if (ret) { eprintf("Cannot setup simplefb: Error reserving memory\n"); return ret; } ret = fdt_setup_simplefb_node(blob, offset, sunxi_display->fb_addr, uc_priv->xsize, uc_priv->ysize, VNBYTES(uc_priv->bpix) * uc_priv->xsize, "x8r8g8b8"); if (ret) eprintf("Cannot setup simplefb: Error setting properties\n"); return ret; } #endif /* CONFIG_OF_BOARD_SETUP && CONFIG_VIDEO_DT_SIMPLEFB */