# # Video configuration # menu "Graphics support" config VIDEO bool "Enable driver model support for LCD/video" depends on DM help This enables driver model for LCD and video devices. These support a bitmap display of various sizes and depths which can be drawn on to display a command-line console or splash screen. Enabling this option compiles in the video uclass and routes all LCD/video access through this. if VIDEO config VIDEO_FONT_4X6 bool "4 x 6 font size" help Font for video console driver, 4 x 6 pixels. Provides character bitmap data in header file. When selecting multiple fonts, you may want to enable CMD_SELECT_FONT too. config VIDEO_FONT_8X16 bool "8 x 16 font size" default y help Font for video console driver, 8 x 16 pixels Provides character bitmap data in header file. When selecting multiple fonts, you may want to enable CMD_SELECT_FONT too. config VIDEO_FONT_SUN12X22 bool "12 x 22 font size" help Font for video console driver, 12 x 22 pixels Provides character bitmap data in header file. When selecting multiple fonts, you may want to enable CMD_SELECT_FONT too. config VIDEO_FONT_16X32 bool "16 x 32 font size" help Font for video console driver, 16 x 32 pixels Provides character bitmap data in header file. When selecting multiple fonts, you may want to enable CMD_SELECT_FONT too. config VIDEO_LOGO bool "Show the U-Boot logo on the display" default y if !SPLASH_SCREEN select VIDEO_BMP_RLE8 help This enables showing the U-Boot logo on the display when a video device is probed. It appears at the top right. The logo itself is at tools/logos/u-boot_logo.bmp and looks best when the display has a black background. config BACKLIGHT bool "Enable panel backlight uclass support" default y help This provides backlight uclass driver that enables basic panel backlight support. config VIDEO_PCI_DEFAULT_FB_SIZE hex "Default framebuffer size to use if no drivers request it" default 0x1000000 if X86 default 0x800000 if !X86 && VIDEO_BOCHS default 0x0 if !X86 && !VIDEO_BOCHS help Generally, video drivers request the amount of memory they need for the frame buffer when they are bound, by setting the size field in struct video_uc_plat. That memory is then reserved for use after relocation. But PCI drivers cannot be bound before relocation unless they are mentioned in the devicetree. With this value set appropriately, it is possible for PCI video devices to have a framebuffer allocated by U-Boot. Note: the framebuffer needs to be large enough to store all pixels at maximum resolution. For example, at 2560 x 1600 with 32 bits per pixel, 2560 * 1600 * 32 / 8 = 0xfa0000 bytes are needed. config VIDEO_COPY bool "Enable copying the frame buffer to a hardware copy" help On some machines (e.g. x86), reading from the frame buffer is very slow because it is uncached. To improve performance, this feature allows the frame buffer to be kept in cached memory (allocated by U-Boot) and then copied to the hardware frame-buffer as needed. To use this, your video driver must set @copy_base in struct video_uc_plat. config BACKLIGHT_PWM bool "Generic PWM based Backlight Driver" depends on BACKLIGHT && DM_PWM default y help If you have a LCD backlight adjustable by PWM, say Y to enable this driver. This driver can be use with "simple-panel" and it understands the standard device tree (leds/backlight/pwm-backlight.txt) config BACKLIGHT_GPIO bool "Generic GPIO based Backlight Driver" depends on BACKLIGHT help If you have a LCD backlight adjustable by GPIO, say Y to enable this driver. This driver can be used with "simple-panel" and it understands the standard device tree (leds/backlight/gpio-backlight.txt) config VIDEO_BPP8 bool "Support 8-bit-per-pixel displays" default y help Support drawing text and bitmaps onto a 8-bit-per-pixel display. Enabling this will include code to support this display. Without this option, such displays will not be supported and console output will be empty. config VIDEO_BPP16 bool "Support 16-bit-per-pixel displays" default y help Support drawing text and bitmaps onto a 16-bit-per-pixel display. Enabling this will include code to support this display. Without this option, such displays will not be supported and console output will be empty. config VIDEO_BPP32 bool "Support 32-bit-per-pixel displays" default y help Support drawing text and bitmaps onto a 32-bit-per-pixel display. Enabling this will include code to support this display. Without this option, such displays will not be supported and console output will be empty. config VIDEO_ANSI bool "Support ANSI escape sequences in video console" default y if EFI_LOADER help Enable ANSI escape sequence decoding for a more fully functional console. Functionality includes changing the text colour and moving the cursor. These date from the 1970s and are still widely used today to control a text terminal. U-Boot implements these by decoding the sequences and performing the appropriate operation. config VIDEO_MIPI_DSI bool "Support MIPI DSI interface" help Support MIPI DSI interface for driving a MIPI compatible device. The MIPI Display Serial Interface (MIPI DSI) defines a high-speed serial interface between a host processor and a display module. config CONSOLE_NORMAL bool "Support a simple text console" default y help Support drawing text on the frame buffer console so that it can be used as a console. Rotation is not supported by this driver (see CONFIG_CONSOLE_ROTATION for that). A built-in 8x16 font is used for the display. config CONSOLE_ROTATION bool "Support rotated displays" help Sometimes, for example if the display is mounted in portrait mode or even if it's mounted landscape but rotated by 180degree, we need to rotate our content of the display relative to the framebuffer, so that user can read the messages which are printed out. Enable this option to include a text driver which can support this. The rotation is set by the 'rot' parameter in struct video_priv: 0=unrotated, 1=90 degrees clockwise, 2=180 degrees, 3=270 degrees. config CONSOLE_TRUETYPE bool "Support a console that uses TrueType fonts" select CMD_SELECT_FONT help TrueTrype fonts can provide outline-drawing capability rather than needing to provide a bitmap for each font and size that is needed. With this option you can adjust the text size and use a variety of fonts. Note that this is noticeably slower than with normal console. config CONSOLE_TRUETYPE_SIZE int "TrueType font size" depends on CONSOLE_TRUETYPE default 18 help This sets the font size for the console. The size is measured in pixels and is the nominal height of a character. Note that fonts are commonly measured in 'points', being 1/72 inch (about 3.52mm). However that measurement depends on the size of your display and there is no standard display density. At present there is not a method to select the display's physical size, which would allow U-Boot to calculate the correct font size. config CONSOLE_TRUETYPE_MAX_METRICS int "TrueType maximum number of font / size combinations" depends on CONSOLE_TRUETYPE default 10 if EXPO default 1 help This sets the number of font / size combinations which can be used by the console. For simple console use a single font is enough. When boot menus are in use, this may need to be increased. Note that a separate entry is needed for each font size, even if the font itself is the same. This is because the entry caches various font metrics which are expensive to regenerate each time the font size changes. config SYS_WHITE_ON_BLACK bool "Display console as white on a black background" default y if ARCH_AT91 || ARCH_EXYNOS || ARCH_ROCKCHIP || ARCH_TEGRA || X86 || ARCH_SUNXI help Normally the display is black on a white background, Enable this option to invert this, i.e. white on a black background. This can be better in low-light situations or to reduce eye strain in some cases. config NO_FB_CLEAR bool "Skip framebuffer clear" help If firmware (whatever loads u-boot) has already put a splash image on screen, you might want to preserve it until whatever u-boot loads takes over the screen. This, for example, can be used to keep splash image on screen until grub graphical boot menu starts. config PANEL bool "Enable panel uclass support" default y help This provides panel uclass driver that enables basic panel support. config SIMPLE_PANEL bool "Enable simple panel support" depends on PANEL && BACKLIGHT && DM_GPIO default y help This turns on a simple panel driver that enables a compatible video panel. config PANEL_HX8238D bool "Enable Himax HX-8238D LCD driver" depends on PANEL help Support for HX-8238D LCD Panel The HX8238-D is a single chip controller and driver LSI that integrates the power circuit. It can drive a maximum 960x240 dot graphics on a-TFT panel displays in 16M colors with dithering. source "drivers/video/fonts/Kconfig" config VIDCONSOLE_AS_LCD bool "Use 'vidconsole' when CONFIG_VIDCONSOLE_AS_NAME string is seen in stdout" help This is a work-around for boards which have 'lcd' or 'vga' in their stdout environment variable, but have moved to use driver model for video. In this case the console will no-longer work. While it is possible to update the environment, the breakage may be confusing for users. This option will be removed around the end of 2020. config VIDCONSOLE_AS_NAME string "Use 'vidconsole' when string defined here is seen in stdout" depends on VIDCONSOLE_AS_LCD default "lcd" if LCD || TEGRA_COMMON default "vga" if !LCD help This is a work-around for boards which have 'lcd' or 'vga' in their stdout environment variable, but have moved to use driver model for video. In this case the console will no-longer work. While it is possible to update the environment, the breakage may be confusing for users. This option will be removed around the end of 2020. config VIDEO_BOCHS bool "Enable Bochs video emulation for QEMU" help Enable this to use the Bochs video support provided in the QEMU emulator. This appears as a PCI device which U-Boot can set up to provide a frame buffer. if VIDEO_BOCHS config VIDEO_BOCHS_SIZE_X int "Width of display (X resolution)" default 1280 help Sets the width of the display. These two options control the size of the display set up by QEMU. Typical sizes are 1024 x 768 or 1280 x 1024. config VIDEO_BOCHS_SIZE_Y int "High of display (Y resolution)" default 1024 help Sets the height of the display. These two options control the size of the display set up by QEMU. Typical sizes are 1024 x 768 or 1280 x 1024. endif config VIDEO_COREBOOT bool "Enable coreboot framebuffer driver support" depends on X86 help Turn on this option to enable a framebuffer driver when U-Boot is loaded by coreboot where the graphics device is configured by coreboot already. This can in principle be used with any platform that coreboot supports. config VIDEO_EFI bool "Enable EFI framebuffer driver support" depends on EFI_STUB || EFI_APP help Turn on this option to enable a framebuffeer driver when U-Boot is loaded as a payload (see README.u-boot_on_efi) by an EFI BIOS where the graphics device is configured by the EFI BIOS already. This can in principle be used with any platform that has an EFI BIOS. config VIDEO_VESA bool "Enable VESA video driver support" help Turn on this option to enable a very simple driver which uses vesa to discover the video mode and then provides a frame buffer for use by U-Boot. This can in principle be used with any platform that supports PCI and video cards that support VESA BIOS Extension (VBE). config FRAMEBUFFER_SET_VESA_MODE bool "Set framebuffer graphics resolution" depends on VIDEO_VESA || VIDEO_BROADWELL_IGD help Set VESA/native framebuffer mode (needed for bootsplash and graphical framebuffer console) choice prompt "framebuffer graphics resolution" default FRAMEBUFFER_VESA_MODE_118 depends on FRAMEBUFFER_SET_VESA_MODE help This option sets the resolution used for the U-Boot framebuffer (and bootsplash screen). config FRAMEBUFFER_VESA_MODE_100 bool "640x400 256-color" config FRAMEBUFFER_VESA_MODE_101 bool "640x480 256-color" config FRAMEBUFFER_VESA_MODE_102 bool "800x600 16-color" config FRAMEBUFFER_VESA_MODE_103 bool "800x600 256-color" config FRAMEBUFFER_VESA_MODE_104 bool "1024x768 16-color" config FRAMEBUFFER_VESA_MODE_105 bool "1024x768 256-color" config FRAMEBUFFER_VESA_MODE_106 bool "1280x1024 16-color" config FRAMEBUFFER_VESA_MODE_107 bool "1280x1024 256-color" config FRAMEBUFFER_VESA_MODE_108 bool "80x60 text" config FRAMEBUFFER_VESA_MODE_109 bool "132x25 text" config FRAMEBUFFER_VESA_MODE_10A bool "132x43 text" config FRAMEBUFFER_VESA_MODE_10B bool "132x50 text" config FRAMEBUFFER_VESA_MODE_10C bool "132x60 text" config FRAMEBUFFER_VESA_MODE_10D bool "320x200 32k-color (1:5:5:5)" config FRAMEBUFFER_VESA_MODE_10E bool "320x200 64k-color (5:6:5)" config FRAMEBUFFER_VESA_MODE_10F bool "320x200 16.8M-color (8:8:8)" config FRAMEBUFFER_VESA_MODE_110 bool "640x480 32k-color (1:5:5:5)" config FRAMEBUFFER_VESA_MODE_111 bool "640x480 64k-color (5:6:5)" config FRAMEBUFFER_VESA_MODE_112 bool "640x480 16.8M-color (8:8:8)" config FRAMEBUFFER_VESA_MODE_113 bool "800x600 32k-color (1:5:5:5)" config FRAMEBUFFER_VESA_MODE_114 bool "800x600 64k-color (5:6:5)" config FRAMEBUFFER_VESA_MODE_115 bool "800x600 16.8M-color (8:8:8)" config FRAMEBUFFER_VESA_MODE_116 bool "1024x768 32k-color (1:5:5:5)" config FRAMEBUFFER_VESA_MODE_117 bool "1024x768 64k-color (5:6:5)" config FRAMEBUFFER_VESA_MODE_118 bool "1024x768 16.8M-color (8:8:8)" config FRAMEBUFFER_VESA_MODE_119 bool "1280x1024 32k-color (1:5:5:5)" config FRAMEBUFFER_VESA_MODE_11A bool "1280x1024 64k-color (5:6:5)" config FRAMEBUFFER_VESA_MODE_11B bool "1280x1024 16.8M-color (8:8:8)" config FRAMEBUFFER_VESA_MODE_USER bool "Manually select VESA mode" endchoice # Map the config names to an integer (KB). config FRAMEBUFFER_VESA_MODE prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER hex default 0x100 if FRAMEBUFFER_VESA_MODE_100 default 0x101 if FRAMEBUFFER_VESA_MODE_101 default 0x102 if FRAMEBUFFER_VESA_MODE_102 default 0x103 if FRAMEBUFFER_VESA_MODE_103 default 0x104 if FRAMEBUFFER_VESA_MODE_104 default 0x105 if FRAMEBUFFER_VESA_MODE_105 default 0x106 if FRAMEBUFFER_VESA_MODE_106 default 0x107 if FRAMEBUFFER_VESA_MODE_107 default 0x108 if FRAMEBUFFER_VESA_MODE_108 default 0x109 if FRAMEBUFFER_VESA_MODE_109 default 0x10A if FRAMEBUFFER_VESA_MODE_10A default 0x10B if FRAMEBUFFER_VESA_MODE_10B default 0x10C if FRAMEBUFFER_VESA_MODE_10C default 0x10D if FRAMEBUFFER_VESA_MODE_10D default 0x10E if FRAMEBUFFER_VESA_MODE_10E default 0x10F if FRAMEBUFFER_VESA_MODE_10F default 0x110 if FRAMEBUFFER_VESA_MODE_110 default 0x111 if FRAMEBUFFER_VESA_MODE_111 default 0x112 if FRAMEBUFFER_VESA_MODE_112 default 0x113 if FRAMEBUFFER_VESA_MODE_113 default 0x114 if FRAMEBUFFER_VESA_MODE_114 default 0x115 if FRAMEBUFFER_VESA_MODE_115 default 0x116 if FRAMEBUFFER_VESA_MODE_116 default 0x117 if FRAMEBUFFER_VESA_MODE_117 default 0x118 if FRAMEBUFFER_VESA_MODE_118 default 0x119 if FRAMEBUFFER_VESA_MODE_119 default 0x11A if FRAMEBUFFER_VESA_MODE_11A default 0x11B if FRAMEBUFFER_VESA_MODE_11B default 0x117 if FRAMEBUFFER_VESA_MODE_USER config VIDEO_LCD_ANX9804 bool "ANX9804 bridge chip" ---help--- Support for the ANX9804 bridge chip, which can take pixel data coming from a parallel LCD interface and translate it on the fy into a DP interface for driving eDP TFT displays. It uses I2C for configuration. config ATMEL_LCD bool "Atmel LCD panel support" depends on ARCH_AT91 config ATMEL_LCD_BGR555 bool "Display in BGR555 mode" help Use the BGR555 output mode. Otherwise RGB565 is used. config VIDEO_BCM2835 bool "Display support for BCM2835" help The graphics processor already sets up the display so this driver simply checks the resolution and then sets up the frame buffer with that same resolution (or as near as possible) and 32bpp depth, so that U-Boot can access it with full colour depth. config VIDEO_LCD_ENDEAVORU tristate "Endeavoru 720x1280 DSI video mode panel" depends on PANEL && BACKLIGHT select VIDEO_MIPI_DSI help Say Y here if you want to enable support for the IPS-LCD panel module for HTC One X. Driver supports a family of panels, made at least by 3 vendors (Sharp, Sony and AUO), but set up using the same DSI command sequence. The panel has a 720x1280 resolution and uses 24 bit RGB per pixel. config VIDEO_LCD_HIMAX_HX8394 bool "Himax HX8394 DSI LCD panel support" depends on PANEL && BACKLIGHT select VIDEO_MIPI_DSI help Say Y here if you want to enable support for Himax HX8394 dsi 4dl panel. config VIDEO_LCD_ORISETECH_OTM8009A bool "OTM8009A DSI LCD panel support" select VIDEO_MIPI_DSI help Say Y here if you want to enable support for Orise Technology otm8009a 480x800 dsi 2dl panel. config VIDEO_LCD_RAYDIUM_RM68200 bool "RM68200 DSI LCD panel support" select VIDEO_MIPI_DSI help Say Y here if you want to enable support for Raydium RM68200 720x1280 DSI video mode panel. config VIDEO_LCD_RENESAS_R61307 tristate "Renesas R61307 DSI video mode panel" depends on PANEL && BACKLIGHT select VIDEO_MIPI_DSI help Say Y here if you want to enable support for KOE tx13d100vm0eaa IPS-LCD module with Renesas R69328 IC. The panel has a 1024x768 resolution and uses 24 bit RGB per pixel. config VIDEO_LCD_RENESAS_R69328 tristate "Renesas R69328 720x1280 DSI video mode panel" depends on PANEL && BACKLIGHT select VIDEO_MIPI_DSI help Say Y here if you want to enable support for JDI dx12d100vm0eaa IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280 resolution and uses 24 bit RGB per pixel. config VIDEO_LCD_SSD2828 bool "SSD2828 bridge chip" ---help--- Support for the SSD2828 bridge chip, which can take pixel data coming from a parallel LCD interface and translate it on the fly into MIPI DSI interface for driving a MIPI compatible LCD panel. It uses SPI for configuration. config VIDEO_LCD_SSD2828_TX_CLK int "SSD2828 TX_CLK frequency (in MHz)" depends on VIDEO_LCD_SSD2828 default 0 ---help--- The frequency of the crystal, which is clocking SSD2828. It may be anything in the 8MHz-30MHz range and the exact value should be retrieved from the board schematics. Or in the case of Allwinner hardware, it can be usually found as 'lcd_xtal_freq' variable in FEX files. It can be also set to 0 for selecting PCLK from the parallel LCD interface instead of TX_CLK as the PLL clock source. config VIDEO_LCD_SSD2828_RESET string "RESET pin of SSD2828" depends on VIDEO_LCD_SSD2828 default "" ---help--- The reset pin of SSD2828 chip. This takes a string in the format understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H. config VIDEO_LCD_TDO_TL070WSH30 bool "TDO TL070WSH30 DSI LCD panel support" select VIDEO_MIPI_DSI help Say Y here if you want to enable support for TDO TL070WSH30 1024x600 DSI video mode panel. config VIDEO_LCD_HITACHI_TX18D42VM bool "Hitachi tx18d42vm LVDS LCD panel support" ---help--- Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a lcd controller which needs to be initialized over SPI, once that is done they work like a regular LVDS panel. config VIDEO_LCD_SPI_CS string "SPI CS pin for LCD related config job" depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM default "" ---help--- This is one of the SPI communication pins, involved in setting up a working LCD configuration. The exact role of SPI may differ for different hardware setups. The option takes a string in the format understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H. config VIDEO_LCD_SPI_SCLK string "SPI SCLK pin for LCD related config job" depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM default "" ---help--- This is one of the SPI communication pins, involved in setting up a working LCD configuration. The exact role of SPI may differ for different hardware setups. The option takes a string in the format understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H. config VIDEO_LCD_SPI_MOSI string "SPI MOSI pin for LCD related config job" depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM default "" ---help--- This is one of the SPI communication pins, involved in setting up a working LCD configuration. The exact role of SPI may differ for different hardware setups. The option takes a string in the format understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H. config VIDEO_LCD_SPI_MISO string "SPI MISO pin for LCD related config job (optional)" depends on VIDEO_LCD_SSD2828 default "" ---help--- This is one of the SPI communication pins, involved in setting up a working LCD configuration. The exact role of SPI may differ for different hardware setups. If wired up, this pin may provide additional useful functionality. Such as bi-directional communication with the hardware and LCD panel id retrieval (if the panel can report it). The option takes a string in the format understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H. source "drivers/video/meson/Kconfig" config VIDEO_MVEBU bool "Armada XP LCD controller" ---help--- Support for the LCD controller integrated in the Marvell Armada XP SoC. config VIDEO_OMAP3 bool "Enable OMAP3+ DSS Support" depends on ARCH_OMAP2PLUS help This enables the Display subsystem (DSS) on OMAP3+ boards. config I2C_EDID bool "Enable EDID library" help This enables library for accessing EDID data from an LCD panel. config DISPLAY bool "Enable Display support" depends on DM select I2C_EDID help This supports drivers that provide a display, such as eDP (Embedded DisplayPort) and HDMI (High Definition Multimedia Interface). The devices provide a simple interface to start up the display, read display information and enable it. config NXP_TDA19988 bool "Enable NXP TDA19988 support" depends on DISPLAY help This enables support for the NXP TDA19988 HDMI encoder. This encoder will convert RGB data streams into HDMI-encoded signals. config ATMEL_HLCD bool "Enable ATMEL video support using HLCDC" help HLCDC supports video output to an attached LCD panel. config BACKLIGHT_LM3533 bool "Backlight Driver for LM3533" depends on BACKLIGHT select DM_I2C help Say Y to enable the backlight driver for National Semiconductor / TI LM3533 Lighting Power chip. Only Bank A is supported as for now. Supported backlight level range is from 2 to 255 with step of 1. source "drivers/video/ti/Kconfig" source "drivers/video/exynos/Kconfig" config LOGICORE_DP_TX bool "Enable Logicore DP TX driver" depends on DISPLAY help Enable the driver for the transmitter part of the Xilinx LogiCORE DisplayPort, a IP core for Xilinx FPGAs that implements a DisplayPort video interface as defined by VESA DisplayPort v1.2. Note that this is a pure transmitter device, and has no display capabilities by itself. config VIDEO_BROADWELL_IGD bool "Enable Intel Broadwell integrated graphics device" depends on X86 help This enables support for integrated graphics on Intel broadwell devices. Initialisation is mostly performed by a VGA boot ROM, with some setup handled by U-Boot itself. The graphics adaptor works as a VESA device and supports LCD panels, eDP and LVDS outputs. Configuration of most aspects of device operation is performed using a special tool which configures the VGA ROM, but the graphics resolution can be selected in U-Boot. config VIDEO_IVYBRIDGE_IGD bool "Enable Intel Ivybridge integration graphics support" depends on X86 help This enables support for integrated graphics on Intel ivybridge devices. Initialisation is mostly performed by a VGA boot ROM, with some setup handled by U-Boot itself. The graphics adaptor works as a VESA device and supports LCD panels, eDP and LVDS outputs. Configuration of most aspects of device operation is performed using a special tool which configures the VGA ROM, but the graphics resolution can be selected in U-Boot. source "drivers/video/rockchip/Kconfig" config VIDEO_ARM_MALIDP bool "Enable Arm Mali Display Processor support" depends on OF_CONTROL select VEXPRESS_CLK help This enables support for Arm Ltd Mali Display Processors from the DP500, DP550 and DP650 family. config VIDEO_SANDBOX_SDL bool "Enable sandbox video console using SDL" depends on SANDBOX_SDL help When using sandbox you can enable an emulated LCD display which appears as an SDL (Simple DirectMedia Layer) window. This is a console device and can display stdout output. Within U-Boot is is a normal bitmap display and can display images as well as text. source "drivers/video/stm32/Kconfig" source "drivers/video/tidss/Kconfig" config VIDEO_TEGRA124 bool "Enable video support on Tegra124" help Tegra124 supports many video output options including eDP and HDMI. At present only eDP is supported by U-Boot. This option enables this support which can be used on devices which have an eDP display connected. source "drivers/video/bridge/Kconfig" source "drivers/video/tegra20/Kconfig" source "drivers/video/imx/Kconfig" config VIDEO_MXS bool "Enable video support on i.MX28/i.MX6UL/i.MX7 SoCs" help Enable framebuffer driver for i.MX28/i.MX6UL/i.MX7 processors config VIDEO_NX bool "Enable video support on Nexell SoC" depends on ARCH_S5P6818 || ARCH_S5P4418 help Nexell SoC supports many video output options including eDP and HDMI. This option enables this support which can be used on devices which have an eDP display connected. config VIDEO_SEPS525 bool "Enable video support for Seps525" depends on DM_GPIO help Enable support for the Syncoam PM-OLED display driver (RGB 160x128). Currently driver is supporting only SPI interface. source "drivers/video/zynqmp/Kconfig" source "drivers/video/nexell/Kconfig" config CONSOLE_SCROLL_LINES int "Number of lines to scroll the console by" default 1 help When the console need to be scrolled, this is the number of lines to scroll by. It defaults to 1. Increasing this makes the console jump but can help speed up operation when scrolling is slow. config VIDEO_DW_HDMI bool help Enables the common driver code for the Designware HDMI TX block found in SoCs from various vendors. As this does not provide any functionality by itself (but rather requires a SoC-specific glue driver to call it), it can not be enabled from the configuration menu. config VIDEO_DSI_HOST_SANDBOX bool "Enable sandbox for dsi host" depends on SANDBOX select VIDEO_MIPI_DSI help Enable support for sandbox dsi host device used for testing purposes. Display Serial Interface (DSI) defines a serial bus and a communication protocol between the host and the device (panel, bridge). config VIDEO_DW_MIPI_DSI bool select VIDEO_MIPI_DSI help Enables the common driver code for the Synopsis Designware MIPI DSI block found in SoCs from various vendors. As this does not provide any functionality by itself (but rather requires a SoC-specific glue driver to call it), it can not be enabled from the configuration menu. config VIDEO_SIMPLE bool "Simple display driver for preconfigured display" help Enables a simple generic display driver which utilizes the simple-framebuffer devicetree bindings. This driver assumes that the display hardware has been initialized before u-boot starts, and u-boot will simply render to the pre- allocated frame buffer surface. config VIDEO_DT_SIMPLEFB bool "Enable SimpleFB support for passing framebuffer to OS" help Enables the code to pass the framebuffer to the kernel as a simple framebuffer in the device tree. The video output is initialized by U-Boot, and kept by the kernel. config VIDEO_MCDE_SIMPLE bool "Simple driver for ST-Ericsson MCDE with preconfigured display" help Enables a simple display driver for ST-Ericsson MCDE (Multichannel Display Engine), which reads the configuration from the MCDE registers. This driver assumes that the display hardware has been initialized before u-boot starts, and u-boot will simply render to the pre- allocated frame buffer surface. config OSD bool "Enable OSD support" depends on DM help This supports drivers that provide a OSD (on-screen display), which is a (usually text-oriented) graphics buffer to show information on a display. config SANDBOX_OSD bool "Enable sandbox OSD" depends on OSD help Enable support for sandbox OSD device used for testing purposes. config IHS_VIDEO_OUT bool "Enable IHS video out driver" depends on OSD help Enable support for the gdsys Integrated Hardware Systems (IHS) video out On-screen Display (OSD) used on gdsys FPGAs to control dynamic textual overlays of the display outputs. config VIDEO_REMOVE bool "Remove video driver" help Use this option to specify if user wants to call remove method of video driver in u-boot proper stage. config SPLASH_SCREEN bool "Show a splash-screen image" help If this option is set, the environment is checked for a variable "splashimage". If found, the usual display of logo, copyright and system information on the LCD is suppressed and the BMP image at the address specified in "splashimage" is loaded instead. The console is redirected to the "nulldev", too. This allows for a "silent" boot where a splash screen is loaded very quickly after power-on. The splash_screen_prepare() function is a weak function defined in common/splash.c. It is called as part of the splash screen display sequence. It gives the board an opportunity to prepare the splash image data before it is processed and sent to the frame buffer by U-Boot. Define your own version to use this feature. if SPLASH_SCREEN config SPLASH_SCREEN_ALIGN bool "Allow positioning the splash image anywhere on the display" help If this option is set the splash image can be freely positioned on the screen. Environment variable "splashpos" specifies the position as "x,y". If a positive number is given it is used as number of pixel from left/top. If a negative number is given it is used as number of pixel from right/bottom. You can also specify 'm' for centering the image. Example: setenv splashpos m,m => image at center of screen setenv splashpos 30,20 => image at x = 30 and y = 20 setenv splashpos -10,m => vertically centered image at x = dspWidth - bmpWidth - 9 config HIDE_LOGO_VERSION bool "Hide the version information on the splash screen" help Normally the U-Boot version string is shown on the display when the splash screen is enabled. This information is not otherwise visible since video starts up after U-Boot has displayed the initial banner. Enable this option to hide this information. config SPLASH_SOURCE bool "Control the source of the splash image" help Use the splash_source.c library. This library provides facilities to declare board specific splash image locations, routines for loading splash image from supported locations, and a way of controlling the selected splash location using the "splashsource" environment variable. This CONFIG works as follows: - If splashsource is set to a supported location name as defined by board code, use that splash location. - If splashsource is undefined, use the first splash location as default. - If splashsource is set to an unsupported value, do not load a splash screen. A splash source location can describe either storage with raw data, a storage formatted with a file system or a FIT image. In case of a filesystem, the splash screen data is loaded as a file. The name of the splash screen file can be controlled with the environment variable "splashfile". To enable loading the splash image from a FIT image, CONFIG_FIT must be enabled. The FIT image has to start at the 'offset' field address in the selected splash location. The name of splash image within the FIT shall be specified by the environment variable "splashfile". In case the environment variable "splashfile" is not defined the default name 'splash.bmp' will be used. endif # SPLASH_SCREEN config BMP bool "Enable bmp image display" help Enable bmp functions to display bmp image and get bmp info. BMP is a simple graphics-image file format designed to store bitmap images. It is primarily used on Windows devices. config VIDEO_BMP_GZIP bool "Gzip compressed BMP image support" depends on BMP || SPLASH_SCREEN help If this option is set, additionally to standard BMP images, gzipped BMP images can be displayed via the splashscreen support or the bmp command. config VIDEO_LOGO_MAX_SIZE hex "Maximum size of the bitmap logo in bytes" default 0x100000 help Sets the maximum uncompressed size of the logo. This is needed when decompressing a BMP file using the gzip algorithm, since it cannot read the size from the bitmap header. config VIDEO_BMP_RLE8 bool "Run length encoded BMP image (RLE8) support" help If this option is set, the 8-bit RLE compressed BMP images is supported. config BMP_16BPP bool "16-bit-per-pixel BMP image support" help Support display of bitmaps file with 16-bit-per-pixel config BMP_24BPP bool "24-bit-per-pixel BMP image support" help Support display of bitmaps file with 24-bit-per-pixel. config BMP_32BPP bool "32-bit-per-pixel BMP image support" help Support display of bitmaps file with 32-bit-per-pixel. endif # VIDEO config SPL_VIDEO bool "Enable driver model support for LCD/video in SPL" depends on SPL_DM help The video subsystem adds a small amount of overhead to the image. If this is acceptable and you have a need to use video drivers in SPL, enable this option. It might provide a cleaner interface to setting up video within SPL, and allows the same drivers to be used as U-Boot proper. if SPL_VIDEO source "drivers/video/tidss/Kconfig" config SPL_VIDEO_HANDOFF bool "Pass the video frame-buffer through to U-Boot proper" depends on SPL_BLOBLIST default y if !X86 help Enable this to set up video-handoff information in SPL which can be picked up in U-Boot proper. This includes the frame buffer and various other pieces of information. With this enabled, SPL can set up video and avoid re-initing it later. config SPL_VIDEO_LOGO bool "Show the U-Boot logo on the display at SPL" default y if !SPL_SPLASH_SCREEN select SPL_VIDEO_BMP_RLE8 help This enables showing the U-Boot logo on the display when a video device is probed. It appears at the top right. The logo itself is at tools/logos/u-boot_logo.bmp and looks best when the display has a black background. config SPL_SPLASH_SCREEN bool "Show a splash-screen image at SPL" help If this option is set, the environment is checked for a variable "splashimage" at spl stage. config SPL_SYS_WHITE_ON_BLACK bool "Display console as white on a black background at SPL" help Normally the display is black on a white background, Enable this option to invert this, i.e. white on a black background at spl stage. This can be better in low-light situations or to reduce eye strain in some cases. config SPL_VIDEO_PCI_DEFAULT_FB_SIZE hex "Default framebuffer size to use if no drivers request it at SPL" default 0x1000000 if X86 default 0x800000 if !X86 && VIDEO_BOCHS default 0x0 if !X86 && !VIDEO_BOCHS help Generally, video drivers request the amount of memory they need for the frame buffer when they are bound, by setting the size field in struct video_uc_plat. That memory is then reserved for use after relocation. But PCI drivers cannot be bound before relocation unless they are mentioned in the devicetree. With this value set appropriately, it is possible for PCI video devices to have a framebuffer allocated by U-Boot. Note: the framebuffer needs to be large enough to store all pixels at maximum resolution. For example, at 2560 x 1600 with 32 bits per pixel, 2560 * 1600 * 32 / 8 = 0xfa0000 bytes are needed. config SPL_CONSOLE_SCROLL_LINES int "Number of lines to scroll the console by at SPL" default 1 help When the console need to be scrolled, this is the number of lines to scroll by. It defaults to 1. Increasing this makes the console jump but can help speed up operation when scrolling is slow. config SPL_CONSOLE_NORMAL bool "Support a simple text console at SPL" default y help Support drawing text on the frame buffer console so that it can be used as a console. Rotation is not supported by this driver (see CONFIG_CONSOLE_ROTATION for that). A built-in 8x16 font is used for the display. config SPL_BACKLIGHT bool "Enable panel backlight uclass support at SPL" default y help This provides backlight uclass driver that enables basic panel backlight support. config SPL_PANEL bool "Enable panel uclass support at SPL" default y help This provides panel uclass driver that enables basic panel support. config SPL_SIMPLE_PANEL bool "Enable simple panel support at SPL" depends on SPL_PANEL && SPL_BACKLIGHT && SPL_DM_GPIO default y help This turns on a simple panel driver that enables a compatible video panel. config SPL_SYS_WHITE_ON_BLACK bool "Display console as white on a black background at SPL" help Normally the display is black on a white background, Enable this option to invert this, i.e. white on a black background at spl stage. This can be better in low-light situations or to reduce eye strain in some cases. config SPL_VIDEO_REMOVE bool "Remove video driver after SPL stage" help if this option is enabled video driver will be removed at the end of SPL stage, before loading the next stage. if SPL_SPLASH_SCREEN config SPL_SPLASH_SCREEN_ALIGN bool "Allow positioning the splash image anywhere on the display at SPL" help If this option is set the splash image can be freely positioned on the screen only at SPL. Environment variable "splashpos" specifies the position as "x,y". If a positive number is given it is used as number of pixel from left/top. If a negative number is given it is used as number of pixel from right/bottom. config SPL_SPLASH_SOURCE bool "Control the source of the splash image at SPL" help Use the splash_source.c library. This library provides facilities to declare board specific splash image locations, routines for loading splash image from supported locations, and a way of controlling the selected splash location using the "splashsource" environment variable. This CONFIG works as follows: - If splashsource is set to a supported location name as defined by board code, use that splash location. - If splashsource is undefined, use the first splash location as default. - If splashsource is set to an unsupported value, do not load a splash screen. A splash source location can describe either storage with raw data, a storage formatted with a file system or a FIT image. In case of a filesystem, the splash screen data is loaded as a file. The name of the splash screen file can be controlled with the environment variable "splashfile". To enable loading the splash image from a FIT image, CONFIG_FIT must be enabled. The FIT image has to start at the 'offset' field address in the selected splash location. The name of splash image within the FIT shall be specified by the environment variable "splashfile". In case the environment variable "splashfile" is not defined the default name 'splash.bmp' will be used. endif # SPL_SPLASH_SCREEN config SPL_BMP bool "Enable bmp image display at SPL" help Enable bmp functions to display bmp image and get bmp info in SPL. BMP is a simple graphics-image file format designed to store bitmap images. It is primarily used on Windows devices. config SPL_VIDEO_BMP_GZIP bool "Gzip compressed BMP image support at SPL" depends on SPL_SPLASH_SCREEN || SPL_BMP help If this option is set, additionally to standard BMP images, gzipped BMP images can be displayed via the splashscreen supportat SPL stage. config SPL_VIDEO_LOGO_MAX_SIZE hex "Maximum size of the bitmap logo in bytes at SPL" default 0x100000 help Sets the maximum uncompressed size of the logo. This is needed when decompressing a BMP file using the gzip algorithm, since it cannot read the size from the bitmap header. config SPL_VIDEO_BMP_RLE8 bool "Run length encoded BMP image (RLE8) support at SPL" help If this option is set, the 8-bit RLE compressed BMP images is supported. config SPL_BMP_16BPP bool "16-bit-per-pixel BMP image support at SPL" help Support display of bitmaps file with 16-bit-per-pixel config SPL_BMP_24BPP bool "24-bit-per-pixel BMP image support at SPL" help Support display of bitmaps file with 24-bit-per-pixel. config SPL_BMP_32BPP bool "32-bit-per-pixel BMP image support at SPL" help Support display of bitmaps file with 32-bit-per-pixel. config SPL_VIDEO_BPP8 bool "Support 8-bit-per-pixel displays at SPL" default y help Support drawing text and bitmaps onto a 8-bit-per-pixel display. Enabling this will include code to support this display. Without this option, such displays will not be supported and console output will be empty. config SPL_VIDEO_BPP16 bool "Support 16-bit-per-pixel displays at SPL" default y help Support drawing text and bitmaps onto a 16-bit-per-pixel display. Enabling this will include code to support this display. Without this option, such displays will not be supported and console output will be empty. config SPL_VIDEO_BPP32 bool "Support 32-bit-per-pixel displays at SPL" default y help Support drawing text and bitmaps onto a 32-bit-per-pixel display. Enabling this will include code to support this display. Without this option, such displays will not be supported and console output will be empty. config SPL_HIDE_LOGO_VERSION bool "Hide the version information on the splash screen at SPL" help Normally the U-Boot version string is shown on the display when the splash screen is enabled. This information is not otherwise visible since video starts up after U-Boot has displayed the initial banner. Enable this option to hide this information. endif endmenu