// SPDX-License-Identifier: GPL-2.0 /* * Driver for the NXP ISP1760 chip * * Copyright 2021 Linaro, Rui Miguel Silva * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "isp1760-core.h" #include "isp1760-hcd.h" #include "isp1760-regs.h" #include "isp1760-uboot.h" #define ISP1760_LANGUAGE_DESC "\4\3\19\4" #define ISP1760_VENDOR_DESC "\16\3U\0-\0B\0o\0o\0t\0" #define ISP1760_PRODUCT_NAME_DESC "\52\3I\0S\0P\0-\0 \0H\0o\0s\0t\0 \0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0" static struct kmem_cache *qtd_cachep; static struct kmem_cache *qh_cachep; static struct kmem_cache *urb_listitem_cachep; typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh, struct isp1760_qtd *qtd); static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd) { return hcd->hcd_priv; } #define dw_to_le32(x) (cpu_to_le32((__force u32)x)) #define le32_to_dw(x) ((__force __dw)(le32_to_cpu(x))) /* urb state*/ #define DELETE_URB (0x0008) #define NO_TRANSFER_ACTIVE (0xffffffff) /* Philips Proprietary Transfer Descriptor (PTD) */ typedef __u32 __bitwise __dw; struct ptd { __dw dw0; __dw dw1; __dw dw2; __dw dw3; __dw dw4; __dw dw5; __dw dw6; __dw dw7; }; struct ptd_le32 { __le32 dw0; __le32 dw1; __le32 dw2; __le32 dw3; __le32 dw4; __le32 dw5; __le32 dw6; __le32 dw7; }; #define PTD_OFFSET 0x0400 #define ISO_PTD_OFFSET 0x0400 #define INT_PTD_OFFSET 0x0800 #define ATL_PTD_OFFSET 0x0c00 #define PAYLOAD_OFFSET 0x1000 #define ISP_BANK_0 0x00 #define ISP_BANK_1 0x01 #define ISP_BANK_2 0x02 #define ISP_BANK_3 0x03 #define TO_DW(x) ((__force __dw)x) #define TO_U32(x) ((__force u32)x) /* ATL */ /* DW0 */ #define DW0_VALID_BIT TO_DW(1) #define FROM_DW0_VALID(x) (TO_U32(x) & 0x01) #define TO_DW0_LENGTH(x) TO_DW((((u32)x) << 3)) #define TO_DW0_MAXPACKET(x) TO_DW((((u32)x) << 18)) #define TO_DW0_MULTI(x) TO_DW((((u32)x) << 29)) #define TO_DW0_ENDPOINT(x) TO_DW((((u32)x) << 31)) /* DW1 */ #define TO_DW1_DEVICE_ADDR(x) TO_DW((((u32)x) << 3)) #define TO_DW1_PID_TOKEN(x) TO_DW((((u32)x) << 10)) #define DW1_TRANS_BULK TO_DW(((u32)2 << 12)) #define DW1_TRANS_INT TO_DW(((u32)3 << 12)) #define DW1_TRANS_SPLIT TO_DW(((u32)1 << 14)) #define DW1_SE_USB_LOSPEED TO_DW(((u32)2 << 16)) #define TO_DW1_PORT_NUM(x) TO_DW((((u32)x) << 18)) #define TO_DW1_HUB_NUM(x) TO_DW((((u32)x) << 25)) /* DW2 */ #define TO_DW2_DATA_START_ADDR(x) TO_DW((((u32)x) << 8)) #define TO_DW2_RL(x) TO_DW(((x) << 25)) #define FROM_DW2_RL(x) ((TO_U32(x) >> 25) & 0xf) /* DW3 */ #define FROM_DW3_NRBYTESTRANSFERRED(x) TO_U32((x) & 0x3fff) #define FROM_DW3_SCS_NRBYTESTRANSFERRED(x) TO_U32((x) & 0x07ff) #define TO_DW3_NAKCOUNT(x) TO_DW(((x) << 19)) #define FROM_DW3_NAKCOUNT(x) ((TO_U32(x) >> 19) & 0xf) #define TO_DW3_CERR(x) TO_DW(((x) << 23)) #define FROM_DW3_CERR(x) ((TO_U32(x) >> 23) & 0x3) #define TO_DW3_DATA_TOGGLE(x) TO_DW(((x) << 25)) #define FROM_DW3_DATA_TOGGLE(x) ((TO_U32(x) >> 25) & 0x1) #define TO_DW3_PING(x) TO_DW(((x) << 26)) #define FROM_DW3_PING(x) ((TO_U32(x) >> 26) & 0x1) #define DW3_ERROR_BIT TO_DW((1 << 28)) #define DW3_BABBLE_BIT TO_DW((1 << 29)) #define DW3_HALT_BIT TO_DW((1 << 30)) #define DW3_ACTIVE_BIT TO_DW((1 << 31)) #define FROM_DW3_ACTIVE(x) ((TO_U32(x) >> 31) & 0x01) #define INT_UNDERRUN BIT(2) #define INT_BABBLE BIT(1) #define INT_EXACT BIT(0) #define SETUP_PID (2) #define IN_PID (1) #define OUT_PID (0) /* Errata 1 */ #define RL_COUNTER (0) #define NAK_COUNTER (0) #define ERR_COUNTER (3) struct isp1760_qtd { u8 packet_type; void *data_buffer; u32 payload_addr; /* the rest is HCD-private */ struct list_head qtd_list; struct urb *urb; size_t length; size_t actual_length; /* * QTD_ENQUEUED: waiting for transfer (inactive) * QTD_PAYLOAD_ALLOC: chip mem has been allocated for payload * QTD_XFER_STARTED: valid ptd has been written to isp176x - only * interrupt handler may touch this qtd! * QTD_XFER_COMPLETE: payload has been transferred successfully * QTD_RETIRE: transfer error/abort qtd */ #define QTD_ENQUEUED 0 #define QTD_PAYLOAD_ALLOC 1 #define QTD_XFER_STARTED 2 #define QTD_XFER_COMPLETE 3 #define QTD_RETIRE 4 u32 status; }; /* Queue head, one for each active endpoint */ struct isp1760_qh { struct list_head qh_list; struct list_head qtd_list; int epnum; u32 toggle; u32 ping; int slot; int tt_buffer_dirty; /* See USB2.0 spec section 11.17.5 */ }; struct urb_listitem { struct list_head urb_list; struct urb *urb; }; static const u32 isp1763_hc_portsc1_fields[] = { [PORT_OWNER] = BIT(13), [PORT_POWER] = BIT(12), [PORT_LSTATUS] = BIT(10), [PORT_RESET] = BIT(8), [PORT_SUSPEND] = BIT(7), [PORT_RESUME] = BIT(6), [PORT_PE] = BIT(2), [PORT_CSC] = BIT(1), [PORT_CONNECT] = BIT(0), }; static struct descriptor { struct usb_device_descriptor device; struct usb_config_descriptor config; struct usb_interface_descriptor interface; struct usb_endpoint_descriptor endpoint; } __packed rh_descriptor = { { /* usb 2.0 root hub device descriptor */ 0x12, /* __u8 bLength; */ USB_DT_DEVICE, /* __u8 bDescriptorType; Device */ 0x0002, /* __le16 bcdUSB; v2.0 */ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ 0x00, /* __u8 bDeviceSubClass; */ 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */ 0x6b1d, /* __le16 idVendor; Linux Foundation 0x1d6b */ 0x0200, /* __le16 idProduct; device 0x0002 */ 0x0001, /* __le16 bcdDevice */ 0x03, /* __u8 iManufacturer; */ 0x02, /* __u8 iProduct; */ 0x01, /* __u8 iSerialNumber; */ 0x01 /* __u8 bNumConfigurations; */ }, { /* one configuration */ 0x09, /* __u8 bLength; */ USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */ 0x1900, /* __le16 wTotalLength; */ 0x01, /* __u8 bNumInterfaces; (1) */ 0x01, /* __u8 bConfigurationValue; */ 0x00, /* __u8 iConfiguration; */ 0xc0, /* __u8 bmAttributes; * Bit 7: must be set, * 6: Self-powered, * 5: Remote wakeup, * 4..0: resvd */ 0x00, /* __u8 MaxPower; */ }, { /* one interface */ 0x09, /* __u8 if_bLength; */ USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */ 0x00, /* __u8 if_bInterfaceNumber; */ 0x00, /* __u8 if_bAlternateSetting; */ 0x01, /* __u8 if_bNumEndpoints; */ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ 0x00, /* __u8 if_bInterfaceSubClass; */ 0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */ 0x00, /* __u8 if_iInterface; */ }, { /* one endpoint (status change endpoint) */ 0x07, /* __u8 ep_bLength; */ USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ 0x03, /* __u8 ep_bmAttributes; Interrupt */ /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */ /* see hub.c:hub_configure() for details. */ (USB_MAXCHILDREN + 1 + 7) / 8, 0x00, 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */ }, }; /* * Access functions for isp176x registers regmap fields */ static u32 isp1760_hcd_read(struct usb_hcd *hcd, u32 field) { struct isp1760_hcd *priv = hcd_to_priv(hcd); return isp1760_field_read(priv->fields, field); } /* * We need, in isp1763, to write directly the values to the portsc1 * register so it will make the other values to trigger. */ static void isp1760_hcd_portsc1_set_clear(struct isp1760_hcd *priv, u32 field, u32 val) { u32 bit = isp1763_hc_portsc1_fields[field]; u32 port_status = readl(priv->base + ISP1763_HC_PORTSC1); if (val) writel(port_status | bit, priv->base + ISP1763_HC_PORTSC1); else writel(port_status & ~bit, priv->base + ISP1763_HC_PORTSC1); } static void isp1760_hcd_write(struct usb_hcd *hcd, u32 field, u32 val) { struct isp1760_hcd *priv = hcd_to_priv(hcd); if (unlikely(priv->is_isp1763 && (field >= PORT_OWNER && field <= PORT_CONNECT))) return isp1760_hcd_portsc1_set_clear(priv, field, val); isp1760_field_write(priv->fields, field, val); } static void isp1760_hcd_set(struct usb_hcd *hcd, u32 field) { isp1760_hcd_write(hcd, field, 0xFFFFFFFF); } static void isp1760_hcd_clear(struct usb_hcd *hcd, u32 field) { isp1760_hcd_write(hcd, field, 0); } static int isp1760_hcd_set_and_wait(struct usb_hcd *hcd, u32 field, u32 timeout_us) { struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 val; isp1760_hcd_set(hcd, field); return regmap_field_read_poll_timeout(priv->fields[field], val, val, 0, timeout_us); } static int isp1760_hcd_set_and_wait_swap(struct usb_hcd *hcd, u32 field, u32 timeout_us) { struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 val; isp1760_hcd_set(hcd, field); return regmap_field_read_poll_timeout(priv->fields[field], val, !val, 0, timeout_us); } static int isp1760_hcd_clear_and_wait(struct usb_hcd *hcd, u32 field, u32 timeout_us) { struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 val; isp1760_hcd_clear(hcd, field); return regmap_field_read_poll_timeout(priv->fields[field], val, !val, 0, timeout_us); } static bool isp1760_hcd_is_set(struct usb_hcd *hcd, u32 field) { return !!isp1760_hcd_read(hcd, field); } static bool isp1760_hcd_ppc_is_set(struct usb_hcd *hcd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); if (priv->is_isp1763) return true; return isp1760_hcd_is_set(hcd, HCS_PPC); } static u32 isp1760_hcd_n_ports(struct usb_hcd *hcd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); if (priv->is_isp1763) return 1; return isp1760_hcd_read(hcd, HCS_N_PORTS); } /* * Access functions for isp176x memory (offset >= 0x0400). * * bank_reads8() reads memory locations prefetched by an earlier write to * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi- * bank optimizations, you should use the more generic mem_read() below. * * For access to ptd memory, use the specialized ptd_read() and ptd_write() * below. * * These functions copy via MMIO data to/from the device. memcpy_{to|from}io() * doesn't quite work because some people have to enforce 32-bit access */ static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr, __u32 *dst, u32 bytes) { __u32 __iomem *src; u32 val; __u8 *src_byteptr; __u8 *dst_byteptr; src = src_base + (bank_addr | src_offset); if (src_offset < PAYLOAD_OFFSET) { while (bytes >= 4) { *dst = readl_relaxed(src); bytes -= 4; src++; dst++; } } else { while (bytes >= 4) { *dst = __raw_readl(src); bytes -= 4; src++; dst++; } } if (!bytes) return; /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully * allocated. */ if (src_offset < PAYLOAD_OFFSET) val = readl_relaxed(src); else val = __raw_readl(src); dst_byteptr = (void *)dst; src_byteptr = (void *)&val; while (bytes > 0) { *dst_byteptr = *src_byteptr; dst_byteptr++; src_byteptr++; bytes--; } } static void isp1760_mem_read(struct usb_hcd *hcd, u32 src_offset, void *dst, u32 bytes) { struct isp1760_hcd *priv = hcd_to_priv(hcd); isp1760_hcd_write(hcd, MEM_BANK_SEL, ISP_BANK_0); isp1760_hcd_write(hcd, MEM_START_ADDR, src_offset); ndelay(100); bank_reads8(priv->base, src_offset, ISP_BANK_0, dst, bytes); } /* * ISP1763 does not have the banks direct host controller memory access, * needs to use the HC_DATA register. Add data read/write according to this, * and also adjust 16bit access. */ static void isp1763_mem_read(struct usb_hcd *hcd, u16 srcaddr, u16 *dstptr, u32 bytes) { struct isp1760_hcd *priv = hcd_to_priv(hcd); /* Write the starting device address to the hcd memory register */ isp1760_reg_write(priv->regs, ISP1763_HC_MEMORY, srcaddr); ndelay(100); /* Delay between consecutive access */ /* As long there are at least 16-bit to read ... */ while (bytes >= 2) { *dstptr = __raw_readw(priv->base + ISP1763_HC_DATA); bytes -= 2; dstptr++; } /* If there are no more bytes to read, return */ if (bytes <= 0) return; *((u8 *)dstptr) = (u8)(readw(priv->base + ISP1763_HC_DATA) & 0xFF); } static void mem_read(struct usb_hcd *hcd, u32 src_offset, __u32 *dst, u32 bytes) { struct isp1760_hcd *priv = hcd_to_priv(hcd); if (!priv->is_isp1763) return isp1760_mem_read(hcd, src_offset, (u16 *)dst, bytes); isp1763_mem_read(hcd, (u16)src_offset, (u16 *)dst, bytes); } static void isp1760_mem_write(void __iomem *dst_base, u32 dst_offset, __u32 const *src, u32 bytes) { __u32 __iomem *dst; dst = dst_base + dst_offset; if (dst_offset < PAYLOAD_OFFSET) { while (bytes >= 4) { writel_relaxed(*src, dst); bytes -= 4; src++; dst++; } } else { while (bytes >= 4) { __raw_writel(*src, dst); bytes -= 4; src++; dst++; } } if (!bytes) return; /* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the * extra bytes should not be read by the HW. */ if (dst_offset < PAYLOAD_OFFSET) writel_relaxed(*src, dst); else __raw_writel(*src, dst); } static void isp1763_mem_write(struct usb_hcd *hcd, u16 dstaddr, u16 *src, u32 bytes) { struct isp1760_hcd *priv = hcd_to_priv(hcd); /* Write the starting device address to the hcd memory register */ isp1760_reg_write(priv->regs, ISP1763_HC_MEMORY, dstaddr); ndelay(100); /* Delay between consecutive access */ while (bytes >= 2) { /* Get and write the data; then adjust the data ptr and len */ __raw_writew(*src, priv->base + ISP1763_HC_DATA); bytes -= 2; src++; } /* If there are no more bytes to process, return */ if (bytes <= 0) return; /* * The only way to get here is if there is a single byte left, * get it and write it to the data reg; */ writew(*((u8 *)src), priv->base + ISP1763_HC_DATA); } static void mem_write(struct usb_hcd *hcd, u32 dst_offset, __u32 *src, u32 bytes) { struct isp1760_hcd *priv = hcd_to_priv(hcd); if (!priv->is_isp1763) return isp1760_mem_write(priv->base, dst_offset, src, bytes); isp1763_mem_write(hcd, dst_offset, (u16 *)src, bytes); } /* * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET, * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32. */ static void isp1760_ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot, struct ptd *ptd) { u16 src_offset = ptd_offset + slot * sizeof(*ptd); struct isp1760_hcd *priv = hcd_to_priv(hcd); isp1760_hcd_write(hcd, MEM_BANK_SEL, ISP_BANK_0); isp1760_hcd_write(hcd, MEM_START_ADDR, src_offset); ndelay(90); bank_reads8(priv->base, src_offset, ISP_BANK_0, (void *)ptd, sizeof(*ptd)); } static void isp1763_ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot, struct ptd *ptd) { u16 src_offset = ptd_offset + slot * sizeof(*ptd); struct ptd_le32 le32_ptd; isp1763_mem_read(hcd, src_offset, (u16 *)&le32_ptd, sizeof(le32_ptd)); /* Normalize the data obtained */ ptd->dw0 = le32_to_dw(le32_ptd.dw0); ptd->dw1 = le32_to_dw(le32_ptd.dw1); ptd->dw2 = le32_to_dw(le32_ptd.dw2); ptd->dw3 = le32_to_dw(le32_ptd.dw3); ptd->dw4 = le32_to_dw(le32_ptd.dw4); ptd->dw5 = le32_to_dw(le32_ptd.dw5); ptd->dw6 = le32_to_dw(le32_ptd.dw6); ptd->dw7 = le32_to_dw(le32_ptd.dw7); } static void ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot, struct ptd *ptd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); if (!priv->is_isp1763) return isp1760_ptd_read(hcd, ptd_offset, slot, ptd); isp1763_ptd_read(hcd, ptd_offset, slot, ptd); } static void isp1763_ptd_write(struct usb_hcd *hcd, u32 ptd_offset, u32 slot, struct ptd *cpu_ptd) { u16 dst_offset = ptd_offset + slot * sizeof(*cpu_ptd); struct ptd_le32 ptd; ptd.dw0 = dw_to_le32(cpu_ptd->dw0); ptd.dw1 = dw_to_le32(cpu_ptd->dw1); ptd.dw2 = dw_to_le32(cpu_ptd->dw2); ptd.dw3 = dw_to_le32(cpu_ptd->dw3); ptd.dw4 = dw_to_le32(cpu_ptd->dw4); ptd.dw5 = dw_to_le32(cpu_ptd->dw5); ptd.dw6 = dw_to_le32(cpu_ptd->dw6); ptd.dw7 = dw_to_le32(cpu_ptd->dw7); isp1763_mem_write(hcd, dst_offset, (u16 *)&ptd.dw0, 8 * sizeof(ptd.dw0)); } static void isp1760_ptd_write(void __iomem *base, u32 ptd_offset, u32 slot, struct ptd *ptd) { u32 dst_offset = ptd_offset + slot * sizeof(*ptd); isp1760_mem_write(base, dst_offset + sizeof(ptd->dw0), (__force u32 *)&ptd->dw1, 7 * sizeof(ptd->dw1)); /* * Make sure dw0 gets written last (after other dw's and after payload) * since it contains the enable bit */ wmb(); isp1760_mem_write(base, dst_offset, (__force u32 *)&ptd->dw0, sizeof(ptd->dw0)); } static void ptd_write(struct usb_hcd *hcd, u32 ptd_offset, u32 slot, struct ptd *ptd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); if (!priv->is_isp1763) return isp1760_ptd_write(priv->base, ptd_offset, slot, ptd); isp1763_ptd_write(hcd, ptd_offset, slot, ptd); } /* memory management of the 60kb on the chip from 0x1000 to 0xffff */ static void init_memory(struct isp1760_hcd *priv) { const struct isp1760_memory_layout *mem = priv->memory_layout; int i, j, curr; u32 payload_addr; payload_addr = PAYLOAD_OFFSET; for (i = 0, curr = 0; i < ARRAY_SIZE(mem->blocks); i++, curr += j) { for (j = 0; j < mem->blocks[i]; j++) { priv->memory_pool[curr + j].start = payload_addr; priv->memory_pool[curr + j].size = mem->blocks_size[i]; priv->memory_pool[curr + j].free = 1; payload_addr += priv->memory_pool[curr + j].size; } } WARN_ON(payload_addr - priv->memory_pool[0].start > mem->payload_area_size); } static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); const struct isp1760_memory_layout *mem = priv->memory_layout; int i; WARN_ON(qtd->payload_addr); if (!qtd->length) return; for (i = 0; i < mem->payload_blocks; i++) { if (priv->memory_pool[i].size >= qtd->length && priv->memory_pool[i].free) { priv->memory_pool[i].free = 0; qtd->payload_addr = priv->memory_pool[i].start; return; } } } static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); const struct isp1760_memory_layout *mem = priv->memory_layout; int i; if (!qtd->payload_addr) return; for (i = 0; i < mem->payload_blocks; i++) { if (priv->memory_pool[i].start == qtd->payload_addr) { WARN_ON(priv->memory_pool[i].free); priv->memory_pool[i].free = 1; qtd->payload_addr = 0; return; } } WARN_ON(1); qtd->payload_addr = 0; } /* reset a non-running (STS_HALT == 1) controller */ static int ehci_reset(struct usb_hcd *hcd) { return isp1760_hcd_set_and_wait_swap(hcd, CMD_RESET, 250 * 1000); } static struct isp1760_qh *qh_alloc(gfp_t flags) { struct isp1760_qh *qh; qh = kmem_cache_alloc(qh_cachep, flags); if (!qh) return NULL; memset(qh, '\0', qh_cachep->sz); INIT_LIST_HEAD(&qh->qh_list); INIT_LIST_HEAD(&qh->qtd_list); qh->slot = -1; return qh; } static void qh_free(struct isp1760_qh *qh) { WARN_ON(!list_empty(&qh->qtd_list)); WARN_ON(qh->slot > -1); kmem_cache_free(qh_cachep, qh); } /* one-time init, only for memory state */ static int priv_init(struct usb_hcd *hcd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 isoc_cache; u32 isoc_thres; int i; for (i = 0; i < QH_END; i++) INIT_LIST_HEAD(&priv->qh_list[i]); /* * hw default: 1K periodic list heads, one per frame. * periodic_size can shrink by USBCMD update if hcc_params allows. */ priv->periodic_size = DEFAULT_I_TDPS; if (priv->is_isp1763) { priv->i_thresh = 2; return 0; } /* controllers may cache some of the periodic schedule ... */ isoc_cache = isp1760_hcd_read(hcd, HCC_ISOC_CACHE); isoc_thres = isp1760_hcd_read(hcd, HCC_ISOC_THRES); /* full frame cache */ if (isoc_cache) priv->i_thresh = 8; else /* N microframes cached */ priv->i_thresh = 2 + isoc_thres; return 0; } static int isp1760_hc_setup(struct usb_hcd *hcd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 atx_reset; int result; u32 scratch; u32 pattern; if (priv->is_isp1763) pattern = 0xcafe; else pattern = 0xdeadcafe; isp1760_hcd_write(hcd, HC_SCRATCH, pattern); /* Change bus pattern */ isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH); scratch = isp1760_hcd_read(hcd, HC_SCRATCH); if (scratch != pattern) { printf("Scratch test failed. 0x%08x\n", scratch); return -ENODEV; } /* * The RESET_HC bit in the SW_RESET register is supposed to reset the * host controller without touching the CPU interface registers, but at * least on the ISP1761 it seems to behave as the RESET_ALL bit and * reset the whole device. We thus can't use it here, so let's reset * the host controller through the EHCI USB Command register. The device * has been reset in core code anyway, so this shouldn't matter. */ isp1760_hcd_clear(hcd, ISO_BUF_FILL); isp1760_hcd_clear(hcd, INT_BUF_FILL); isp1760_hcd_clear(hcd, ATL_BUF_FILL); isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP); isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP); isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP); result = ehci_reset(hcd); if (result) return result; /* Step 11 passed */ /* ATL reset */ if (priv->is_isp1763) atx_reset = SW_RESET_RESET_ATX; else atx_reset = ALL_ATX_RESET; isp1760_hcd_set(hcd, atx_reset); mdelay(10); isp1760_hcd_clear(hcd, atx_reset); if (priv->is_isp1763) { isp1760_hcd_set(hcd, HW_OTG_DISABLE); isp1760_hcd_set(hcd, HW_SW_SEL_HC_DC_CLEAR); isp1760_hcd_set(hcd, HW_HC_2_DIS_CLEAR); isp1760_hcd_set(hcd, HW_DM_PULLDOWN); isp1760_hcd_set(hcd, HW_DP_PULLDOWN); mdelay(10); isp1760_hcd_set(hcd, HW_INTF_LOCK); } isp1760_hcd_set(hcd, HC_INT_IRQ_ENABLE); isp1760_hcd_set(hcd, HC_ATL_IRQ_ENABLE); return priv_init(hcd); } static u32 base_to_chip(u32 base) { return ((base - 0x400) >> 3); } static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh) { struct urb *urb; if (list_is_last(&qtd->qtd_list, &qh->qtd_list)) return 1; urb = qtd->urb; qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list); return (qtd->urb != urb); } /* magic numbers that can affect system performance */ #define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ #define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ #define EHCI_TUNE_RL_TT 0 #define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ #define EHCI_TUNE_MULT_TT 1 #define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ static void create_ptd_atl(struct isp1760_qh *qh, struct isp1760_qtd *qtd, struct ptd *ptd) { u32 maxpacket; u32 multi; u32 rl = RL_COUNTER; u32 nak = NAK_COUNTER; u8 portnr; u8 hubaddr; memset(ptd, 0, sizeof(*ptd)); /* according to 3.6.2, max packet len can not be > 0x400 */ maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe); multi = 1 + ((maxpacket >> 11) & 0x3); maxpacket &= 0x7ff; /* DW0 */ ptd->dw0 = DW0_VALID_BIT; ptd->dw0 |= TO_DW0_LENGTH(qtd->length); ptd->dw0 |= TO_DW0_MAXPACKET(maxpacket); ptd->dw0 |= TO_DW0_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe)); /* DW1 */ ptd->dw1 = TO_DW((usb_pipeendpoint(qtd->urb->pipe) >> 1)); ptd->dw1 |= TO_DW1_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe)); ptd->dw1 |= TO_DW1_PID_TOKEN(qtd->packet_type); if (usb_pipebulk(qtd->urb->pipe)) ptd->dw1 |= DW1_TRANS_BULK; else if (usb_pipeint(qtd->urb->pipe)) ptd->dw1 |= DW1_TRANS_INT; if (qtd->urb->dev->speed != USB_SPEED_HIGH) { /* split transaction */ ptd->dw1 |= DW1_TRANS_SPLIT; if (qtd->urb->dev->speed == USB_SPEED_LOW) ptd->dw1 |= DW1_SE_USB_LOSPEED; if (!qtd->urb->dev->dev->parent_priv_) { portnr = qtd->urb->dev->portnr; hubaddr = qtd->urb->dev->devnum; } else { usb_find_usb2_hub_address_port(qtd->urb->dev, &hubaddr, &portnr); } ptd->dw1 |= TO_DW1_PORT_NUM(portnr); ptd->dw1 |= TO_DW1_HUB_NUM(hubaddr); /* SE bit for Split INT transfers */ if (usb_pipeint(qtd->urb->pipe) && qtd->urb->dev->speed == USB_SPEED_LOW) ptd->dw1 |= DW1_SE_USB_LOSPEED; rl = 0; nak = 0; } else { ptd->dw0 |= TO_DW0_MULTI(multi); if (usb_pipecontrol(qtd->urb->pipe) || usb_pipebulk(qtd->urb->pipe)) ptd->dw3 |= TO_DW3_PING(qh->ping); } /* DW2 */ ptd->dw2 = 0; ptd->dw2 |= TO_DW2_DATA_START_ADDR(base_to_chip(qtd->payload_addr)); ptd->dw2 |= TO_DW2_RL(rl); /* DW3 */ ptd->dw3 |= TO_DW3_NAKCOUNT(nak); ptd->dw3 |= TO_DW3_DATA_TOGGLE(qh->toggle); if (usb_pipecontrol(qtd->urb->pipe)) { if (qtd->data_buffer == qtd->urb->setup_packet) ptd->dw3 &= ~TO_DW3_DATA_TOGGLE(1); else if (last_qtd_of_urb(qtd, qh)) ptd->dw3 |= TO_DW3_DATA_TOGGLE(1); } ptd->dw3 |= DW3_ACTIVE_BIT; /* Cerr */ ptd->dw3 |= TO_DW3_CERR(ERR_COUNTER); } static void transform_add_int(struct isp1760_qh *qh, struct isp1760_qtd *qtd, struct ptd *ptd) { struct usb_host_endpoint *hep = qtd->urb->ep; struct usb_endpoint_descriptor *epd = &hep->desc; u32 usof; u32 period; /* * Most of this is guessing. ISP1761 datasheet is quite unclear, and * the algorithm from the original Philips driver code, which was * pretty much used in this driver before as well, is quite horrendous * and, i believe, incorrect. The code below follows the datasheet and * USB2.0 spec as far as I can tell, and plug/unplug seems to be much * more reliable this way (fingers crossed...). */ if (qtd->urb->dev->speed == USB_SPEED_HIGH) { /* urb->interval is in units of microframes (1/8 ms) */ period = epd->bInterval >> 3; if (epd->bInterval > 4) usof = 0x01; /* One bit set => interval 1 ms * uFrame-match */ else if (epd->bInterval > 2) usof = 0x22; /* Two bits set => interval 1/2 ms */ else if (epd->bInterval > 1) usof = 0x55; /* Four bits set => interval 1/4 ms */ else usof = 0xff; /* All bits set => interval 1/8 ms */ } else { /* urb->interval is in units of frames (1 ms) */ period = epd->bInterval; /* Execute Start Split on any of the four first uFrames */ usof = 0x0f; /* * First 8 bits in dw5 is uSCS and "specifies which uSOF the * complete split needs to be sent. Valid only for IN." Also, * "All bits can be set to one for every transfer." (p 82, * ISP1761 data sheet.) 0x1c is from Philips driver. Where did * that number come from? 0xff seems to work fine... */ /* Execute Complete Split on any uFrame */ ptd->dw5 = TO_DW(0xff); } /* Ensure equal or shorter period than requested */ period = period >> 1; /* Mask off too large values and lowest unused 3 bits */ period &= 0xf8; ptd->dw2 |= TO_DW(period); ptd->dw4 = TO_DW(usof); } static void create_ptd_int(struct isp1760_qh *qh, struct isp1760_qtd *qtd, struct ptd *ptd) { create_ptd_atl(qh, qtd, ptd); transform_add_int(qh, qtd, ptd); } static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb) { if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) { void *ptr; for (ptr = urb->transfer_buffer; ptr < urb->transfer_buffer + urb->transfer_buffer_length; ptr += PAGE_SIZE) flush_dcache_range((unsigned long)ptr, (unsigned long)ptr + PAGE_SIZE); } /* complete() can reenter this HCD */ usb_hcd_unlink_urb_from_ep(hcd, urb); usb_hcd_giveback_urb(hcd, urb, urb->status); } static struct isp1760_qtd *qtd_alloc(gfp_t flags, struct urb *urb, u8 packet_type) { struct isp1760_qtd *qtd; qtd = kmem_cache_alloc(qtd_cachep, flags); if (!qtd) return NULL; memset(qtd, '\0', sizeof(*qtd)); INIT_LIST_HEAD(&qtd->qtd_list); qtd->urb = urb; qtd->packet_type = packet_type; qtd->status = QTD_ENQUEUED; qtd->actual_length = 0; return qtd; } static void qtd_free(struct isp1760_qtd *qtd) { WARN_ON(qtd->payload_addr); kmem_cache_free(qtd_cachep, qtd); } static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot, struct isp1760_slotinfo *slots, struct isp1760_qtd *qtd, struct isp1760_qh *qh, struct ptd *ptd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); const struct isp1760_memory_layout *mem = priv->memory_layout; int skip_map; WARN_ON((slot < 0) || (slot > mem->slot_num - 1)); WARN_ON(qtd->length && !qtd->payload_addr); WARN_ON(slots[slot].qtd); WARN_ON(slots[slot].qh); WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC); if (priv->is_isp1763) ndelay(100); /* Make sure done map has not triggered from some unlinked transfer */ if (ptd_offset == ATL_PTD_OFFSET) { skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP); isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP, skip_map | (1 << slot)); priv->atl_done_map |= isp1760_hcd_read(hcd, HC_ATL_PTD_DONEMAP); priv->atl_done_map &= ~(1 << slot); } else { skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP); isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP, skip_map | (1 << slot)); priv->int_done_map |= isp1760_hcd_read(hcd, HC_INT_PTD_DONEMAP); priv->int_done_map &= ~(1 << slot); } skip_map &= ~(1 << slot); qh->slot = slot; qtd->status = QTD_XFER_STARTED; slots[slot].qtd = qtd; slots[slot].qh = qh; ptd_write(hcd, ptd_offset, slot, ptd); if (ptd_offset == ATL_PTD_OFFSET) isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP, skip_map); else isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP, skip_map); } static int is_short_bulk(struct isp1760_qtd *qtd) { return (usb_pipebulk(qtd->urb->pipe) && (qtd->actual_length < qtd->length)); } static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh, struct list_head *urb_list) { struct isp1760_qtd *qtd, *qtd_next; struct urb_listitem *urb_listitem; int last_qtd; list_for_each_entry_safe(qtd, qtd_next, &qh->qtd_list, qtd_list) { if (qtd->status < QTD_XFER_COMPLETE) break; last_qtd = last_qtd_of_urb(qtd, qh); if (!last_qtd && qtd->status == QTD_RETIRE) qtd_next->status = QTD_RETIRE; if (qtd->status == QTD_XFER_COMPLETE) { if (qtd->actual_length) { switch (qtd->packet_type) { case IN_PID: mem_read(hcd, qtd->payload_addr, qtd->data_buffer, qtd->actual_length); fallthrough; case OUT_PID: qtd->urb->actual_length += qtd->actual_length; fallthrough; case SETUP_PID: break; } } if (is_short_bulk(qtd)) { if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK) qtd->urb->status = -EREMOTEIO; if (!last_qtd) qtd_next->status = QTD_RETIRE; } } if (qtd->payload_addr) free_mem(hcd, qtd); if (last_qtd) { if (qtd->status == QTD_RETIRE && qtd->urb->status == -EINPROGRESS) qtd->urb->status = -EPIPE; /* Defer calling of urb_done() since it releases lock */ urb_listitem = kmem_cache_alloc(urb_listitem_cachep, GFP_ATOMIC); if (unlikely(!urb_listitem)) break; /* Try again on next call */ urb_listitem->urb = qtd->urb; list_add_tail(&urb_listitem->urb_list, urb_list); } list_del(&qtd->qtd_list); qtd_free(qtd); } } #define ENQUEUE_DEPTH 2 static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh) { struct isp1760_hcd *priv = hcd_to_priv(hcd); const struct isp1760_memory_layout *mem = priv->memory_layout; int slot_num = mem->slot_num; int ptd_offset; struct isp1760_slotinfo *slots; int curr_slot, free_slot; int n; struct ptd ptd; struct isp1760_qtd *qtd; if (unlikely(list_empty(&qh->qtd_list))) return; /* Make sure this endpoint's TT buffer is clean before queueing ptds */ if (qh->tt_buffer_dirty) return; if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd, qtd_list)->urb->pipe)) { ptd_offset = INT_PTD_OFFSET; slots = priv->int_slots; } else { ptd_offset = ATL_PTD_OFFSET; slots = priv->atl_slots; } free_slot = -1; for (curr_slot = 0; curr_slot < slot_num; curr_slot++) { if (free_slot == -1 && !slots[curr_slot].qtd) free_slot = curr_slot; if (slots[curr_slot].qh == qh) break; } n = 0; list_for_each_entry(qtd, &qh->qtd_list, qtd_list) { if (qtd->status == QTD_ENQUEUED) { WARN_ON(qtd->payload_addr); alloc_mem(hcd, qtd); if (qtd->length && !qtd->payload_addr) break; if (qtd->length && (qtd->packet_type == SETUP_PID || qtd->packet_type == OUT_PID)) { mem_write(hcd, qtd->payload_addr, qtd->data_buffer, qtd->length); } qtd->status = QTD_PAYLOAD_ALLOC; } if (qtd->status == QTD_PAYLOAD_ALLOC) { /* Start xfer for this endpoint if not already done */ if ((curr_slot > slot_num - 1) && (free_slot > -1)) { if (usb_pipeint(qtd->urb->pipe)) create_ptd_int(qh, qtd, &ptd); else create_ptd_atl(qh, qtd, &ptd); start_bus_transfer(hcd, ptd_offset, free_slot, slots, qtd, qh, &ptd); curr_slot = free_slot; } n++; if (n >= ENQUEUE_DEPTH) break; } } } static void schedule_ptds(struct usb_hcd *hcd) { struct isp1760_hcd *priv; struct isp1760_qh *qh, *qh_next; struct list_head *ep_queue; LIST_HEAD(urb_list); struct urb_listitem *urb_listitem, *urb_listitem_next; int i; if (!hcd) { WARN_ON(1); return; } priv = hcd_to_priv(hcd); /* * check finished/retired xfers, transfer payloads, call urb_done() */ for (i = 0; i < QH_END; i++) { ep_queue = &priv->qh_list[i]; list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) collect_qtds(hcd, qh, &urb_list); } list_for_each_entry_safe(urb_listitem, urb_listitem_next, &urb_list, urb_list) { isp1760_urb_done(hcd, urb_listitem->urb); kmem_cache_free(urb_listitem_cachep, urb_listitem); } /* * Schedule packets for transfer. * * According to USB2.0 specification: * * 1st prio: interrupt xfers, up to 80 % of bandwidth * 2nd prio: control xfers * 3rd prio: bulk xfers * * ... but let's use a simpler scheme here (mostly because ISP1761 doc * is very unclear on how to prioritize traffic): * * 1) Enqueue any queued control transfers, as long as payload chip mem * and PTD ATL slots are available. * 2) Enqueue any queued INT transfers, as long as payload chip mem * and PTD INT slots are available. * 3) Enqueue any queued bulk transfers, as long as payload chip mem * and PTD ATL slots are available. * * Use double buffering (ENQUEUE_DEPTH==2) as a compromise between * conservation of chip mem and performance. * * I'm sure this scheme could be improved upon! */ for (i = 0; i < QH_END; i++) { ep_queue = &priv->qh_list[i]; list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) enqueue_qtds(hcd, qh); } } #define PTD_STATE_QTD_DONE 1 #define PTD_STATE_QTD_RELOAD 2 #define PTD_STATE_URB_RETIRE 3 static int check_int_transfer(struct usb_hcd *hcd, struct ptd *ptd, struct urb *urb) { u32 dw4; int i; dw4 = TO_U32(ptd->dw4); dw4 >>= 8; /* * FIXME: ISP1761 datasheet does not say what to do with these. Do we * need to handle these errors? Is it done in hardware? */ if (ptd->dw3 & DW3_HALT_BIT) { urb->status = -EPROTO; /* Default unknown error */ for (i = 0; i < 8; i++) { switch (dw4 & 0x7) { case INT_UNDERRUN: printf("underrun during uFrame %d\n", i); urb->status = -ECOMM; /* Could not write data */ break; case INT_EXACT: printf("transaction error uFrame %d\n", i); /* timeout, bad CRC, PID error etc. */ urb->status = -EPROTO; break; case INT_BABBLE: printf("babble error during uFrame %d\n", i); urb->status = -EOVERFLOW; break; } dw4 >>= 3; } return PTD_STATE_URB_RETIRE; } return PTD_STATE_QTD_DONE; } static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd, struct urb *urb) { WARN_ON(!ptd); if (ptd->dw3 & DW3_HALT_BIT) { if (ptd->dw3 & DW3_BABBLE_BIT) urb->status = -EOVERFLOW; else if (FROM_DW3_CERR(ptd->dw3)) urb->status = -EPIPE; /* Stall */ else urb->status = -EPROTO; /* Unknown */ /* * useful debug * printf("%s: ptd error:\n" * " dw0: %08x dw1: %08x dw2: %08x dw3: %08x\n" * " dw4: %08x dw5: %08x dw6: %08x dw7: %08x\n", * __func__, * ptd->dw0, ptd->dw1, ptd->dw2, ptd->dw3, * ptd->dw4, ptd->dw5, ptd->dw6, ptd->dw7); */ return PTD_STATE_URB_RETIRE; } /* Transfer Error, *but* active and no HALT -> reload */ if ((ptd->dw3 & DW3_ERROR_BIT) && (ptd->dw3 & DW3_ACTIVE_BIT)) return PTD_STATE_QTD_RELOAD; /* * NAKs are handled in HW by the chip. Usually if the * device is not able to send data fast enough. * This happens mostly on slower hardware. */ if (!FROM_DW3_NAKCOUNT(ptd->dw3) && (ptd->dw3 & DW3_ACTIVE_BIT)) return PTD_STATE_QTD_RELOAD; return PTD_STATE_QTD_DONE; } static void handle_done_ptds(struct usb_hcd *hcd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); struct isp1760_slotinfo *slots; struct isp1760_qtd *qtd; struct isp1760_qh *qh; struct ptd ptd; u32 ptd_offset; int modified; int skip_map; int state; int slot; skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP); priv->int_done_map &= ~skip_map; skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP); priv->atl_done_map &= ~skip_map; modified = priv->int_done_map || priv->atl_done_map; while (priv->int_done_map || priv->atl_done_map) { if (priv->int_done_map) { /* INT ptd */ slot = __ffs(priv->int_done_map); priv->int_done_map &= ~(1 << slot); slots = priv->int_slots; /* * This should not trigger, and could be removed if * noone have any problems with it triggering: */ if (!slots[slot].qh) { WARN_ON(1); continue; } ptd_offset = INT_PTD_OFFSET; ptd_read(hcd, INT_PTD_OFFSET, slot, &ptd); state = check_int_transfer(hcd, &ptd, slots[slot].qtd->urb); } else { /* ATL ptd */ slot = __ffs(priv->atl_done_map); priv->atl_done_map &= ~(1 << slot); slots = priv->atl_slots; /* * This should not trigger, and could be removed if * noone have any problems with it triggering: */ if (!slots[slot].qh) { WARN_ON(1); continue; } ptd_offset = ATL_PTD_OFFSET; ptd_read(hcd, ATL_PTD_OFFSET, slot, &ptd); state = check_atl_transfer(hcd, &ptd, slots[slot].qtd->urb); } qtd = slots[slot].qtd; slots[slot].qtd = NULL; qh = slots[slot].qh; slots[slot].qh = NULL; qh->slot = -1; WARN_ON(qtd->status != QTD_XFER_STARTED); switch (state) { case PTD_STATE_QTD_DONE: if (usb_pipeint(qtd->urb->pipe) && qtd->urb->dev->speed != USB_SPEED_HIGH) qtd->actual_length = FROM_DW3_SCS_NRBYTESTRANSFERRED(ptd.dw3); else qtd->actual_length = FROM_DW3_NRBYTESTRANSFERRED(ptd.dw3); qtd->status = QTD_XFER_COMPLETE; if (list_is_last(&qtd->qtd_list, &qh->qtd_list) || is_short_bulk(qtd)) qtd = NULL; else qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list); qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3); qh->ping = FROM_DW3_PING(ptd.dw3); break; case PTD_STATE_QTD_RELOAD: /* QTD_RETRY, for atls only */ qtd->status = QTD_PAYLOAD_ALLOC; ptd.dw0 |= DW0_VALID_BIT; /* RL counter = ERR counter */ ptd.dw3 &= ~TO_DW3_NAKCOUNT(0xf); ptd.dw3 |= TO_DW3_NAKCOUNT(FROM_DW2_RL(ptd.dw2)); ptd.dw3 &= ~TO_DW3_CERR(3); ptd.dw3 |= TO_DW3_CERR(ERR_COUNTER); qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3); qh->ping = FROM_DW3_PING(ptd.dw3); break; case PTD_STATE_URB_RETIRE: qtd->status = QTD_RETIRE; qtd = NULL; qh->toggle = 0; qh->ping = 0; break; default: WARN_ON(1); continue; } if (qtd && qtd->status == QTD_PAYLOAD_ALLOC) { if (slots == priv->int_slots) { if (state == PTD_STATE_QTD_RELOAD) dev_err(priv->dev, "PTD_STATE_QTD_RELOAD on interrupt packet\n"); if (state != PTD_STATE_QTD_RELOAD) create_ptd_int(qh, qtd, &ptd); } else { if (state != PTD_STATE_QTD_RELOAD) create_ptd_atl(qh, qtd, &ptd); } start_bus_transfer(hcd, ptd_offset, slot, slots, qtd, qh, &ptd); } } if (modified) schedule_ptds(hcd); } static irqreturn_t isp1760_irq(int irq, void *__hci) { struct usb_hcd *hcd = __hci; struct isp1760_hcd *priv = hcd_to_priv(hcd); irqreturn_t irqret = IRQ_NONE; u32 int_reg; u32 imask; imask = isp1760_hcd_read(hcd, HC_INTERRUPT); if (unlikely(!imask)) return irqret; int_reg = priv->is_isp1763 ? ISP1763_HC_INTERRUPT : ISP176x_HC_INTERRUPT; isp1760_reg_write(priv->regs, int_reg, imask); priv->int_done_map |= isp1760_hcd_read(hcd, HC_INT_PTD_DONEMAP); priv->atl_done_map |= isp1760_hcd_read(hcd, HC_ATL_PTD_DONEMAP); handle_done_ptds(hcd); irqret = IRQ_HANDLED; return irqret; } static int isp1763_run(struct usb_hcd *hcd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); int retval; u32 chipid_h; u32 chipid_l; u32 chip_rev; u32 ptd_atl_int; u32 ptd_iso; chipid_h = isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH); chipid_l = isp1760_hcd_read(hcd, HC_CHIP_ID_LOW); chip_rev = isp1760_hcd_read(hcd, HC_CHIP_REV); printf("USB ISP %02x%02x HW rev. %d started\n", chipid_h, chipid_l, chip_rev); isp1760_hcd_clear(hcd, ISO_BUF_FILL); isp1760_hcd_clear(hcd, INT_BUF_FILL); isp1760_hcd_clear(hcd, ATL_BUF_FILL); isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP); isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP); isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP); ndelay(100); isp1760_hcd_clear(hcd, HC_ATL_PTD_DONEMAP); isp1760_hcd_clear(hcd, HC_INT_PTD_DONEMAP); isp1760_hcd_clear(hcd, HC_ISO_PTD_DONEMAP); isp1760_hcd_set(hcd, HW_OTG_DISABLE); isp1760_reg_write(priv->regs, ISP1763_HC_OTG_CTRL_CLEAR, BIT(7)); isp1760_reg_write(priv->regs, ISP1763_HC_OTG_CTRL_CLEAR, BIT(15)); mdelay(10); isp1760_hcd_set(hcd, HC_INT_IRQ_ENABLE); isp1760_hcd_set(hcd, HC_ATL_IRQ_ENABLE); isp1760_hcd_set(hcd, HW_GLOBAL_INTR_EN); isp1760_hcd_clear(hcd, HC_ATL_IRQ_MASK_AND); isp1760_hcd_clear(hcd, HC_INT_IRQ_MASK_AND); isp1760_hcd_clear(hcd, HC_ISO_IRQ_MASK_AND); isp1760_hcd_set(hcd, HC_ATL_IRQ_MASK_OR); isp1760_hcd_set(hcd, HC_INT_IRQ_MASK_OR); isp1760_hcd_set(hcd, HC_ISO_IRQ_MASK_OR); ptd_atl_int = 0x8000; ptd_iso = 0x0001; isp1760_hcd_write(hcd, HC_ATL_PTD_LASTPTD, ptd_atl_int); isp1760_hcd_write(hcd, HC_INT_PTD_LASTPTD, ptd_atl_int); isp1760_hcd_write(hcd, HC_ISO_PTD_LASTPTD, ptd_iso); isp1760_hcd_set(hcd, ATL_BUF_FILL); isp1760_hcd_set(hcd, INT_BUF_FILL); isp1760_hcd_clear(hcd, CMD_LRESET); isp1760_hcd_clear(hcd, CMD_RESET); retval = isp1760_hcd_set_and_wait(hcd, CMD_RUN, 250 * 1000); if (retval) return retval; down_write(&ehci_cf_port_reset_rwsem); retval = isp1760_hcd_set_and_wait(hcd, FLAG_CF, 250 * 1000); up_write(&ehci_cf_port_reset_rwsem); if (retval) return retval; return 0; } static int isp1760_run(struct usb_hcd *hcd) { struct isp1760_hcd *priv = hcd_to_priv(hcd); int retval; u32 chipid_h; u32 chipid_l; u32 chip_rev; u32 ptd_atl_int; u32 ptd_iso; /* * ISP1763 have some differences in the setup and order to enable * the ports, disable otg, setup buffers, and ATL, INT, ISO status. * So, just handle it a separate sequence. */ if (priv->is_isp1763) return isp1763_run(hcd); /* Set PTD interrupt AND & OR maps */ isp1760_hcd_clear(hcd, HC_ATL_IRQ_MASK_AND); isp1760_hcd_clear(hcd, HC_INT_IRQ_MASK_AND); isp1760_hcd_clear(hcd, HC_ISO_IRQ_MASK_AND); isp1760_hcd_set(hcd, HC_ATL_IRQ_MASK_OR); isp1760_hcd_set(hcd, HC_INT_IRQ_MASK_OR); isp1760_hcd_set(hcd, HC_ISO_IRQ_MASK_OR); /* step 23 passed */ isp1760_hcd_set(hcd, HW_GLOBAL_INTR_EN); isp1760_hcd_clear(hcd, CMD_LRESET); isp1760_hcd_clear(hcd, CMD_RESET); retval = isp1760_hcd_set_and_wait(hcd, CMD_RUN, 250 * 1000); if (retval) return retval; /* * XXX * Spec says to write FLAG_CF as last config action, priv code grabs * the semaphore while doing so. */ down_write(&ehci_cf_port_reset_rwsem); retval = isp1760_hcd_set_and_wait(hcd, FLAG_CF, 250 * 1000); up_write(&ehci_cf_port_reset_rwsem); if (retval) return retval; chipid_h = isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH); chipid_l = isp1760_hcd_read(hcd, HC_CHIP_ID_LOW); chip_rev = isp1760_hcd_read(hcd, HC_CHIP_REV); dev_info(priv->dev, "USB ISP %02x%02x HW rev. %d started\n", chipid_h, chipid_l, chip_rev); /* PTD Register Init Part 2, Step 28 */ /* Setup registers controlling PTD checking */ ptd_atl_int = 0x80000000; ptd_iso = 0x00000001; isp1760_hcd_write(hcd, HC_ATL_PTD_LASTPTD, ptd_atl_int); isp1760_hcd_write(hcd, HC_INT_PTD_LASTPTD, ptd_atl_int); isp1760_hcd_write(hcd, HC_ISO_PTD_LASTPTD, ptd_iso); isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP); isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP); isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP); isp1760_hcd_set(hcd, ATL_BUF_FILL); isp1760_hcd_set(hcd, INT_BUF_FILL); /* GRR this is run-once init(), being done every time the HC starts. * So long as they're part of class devices, we can't do it init() * since the class device isn't created that early. */ return 0; } static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len) { qtd->data_buffer = databuffer; qtd->length = len; return qtd->length; } static void qtd_list_free(struct list_head *qtd_list) { struct isp1760_qtd *qtd, *qtd_next; list_for_each_entry_safe(qtd, qtd_next, qtd_list, qtd_list) { list_del(&qtd->qtd_list); qtd_free(qtd); } } /* * Packetize urb->transfer_buffer into list of packets of size wMaxPacketSize. * Also calculate the PID type (SETUP/IN/OUT) for each packet. */ #define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) static void packetize_urb(struct usb_hcd *hcd, struct urb *urb, struct list_head *head, gfp_t flags) { struct isp1760_hcd *priv = hcd_to_priv(hcd); const struct isp1760_memory_layout *mem = priv->memory_layout; struct isp1760_qtd *qtd; void *buf; int len, maxpacketsize; u8 packet_type; /* * URBs map to sequences of QTDs: one logical transaction */ if (!urb->transfer_buffer && urb->transfer_buffer_length) { /* XXX This looks like usb storage / SCSI bug */ dev_err(priv->dev, "buf is null, dma is %08lx len is %d\n", (unsigned long)urb->transfer_dma, urb->transfer_buffer_length); WARN_ON(1); } if (usb_pipein(urb->pipe)) packet_type = IN_PID; else packet_type = OUT_PID; if (usb_pipecontrol(urb->pipe)) { qtd = qtd_alloc(flags, urb, SETUP_PID); if (!qtd) goto cleanup; qtd_fill(qtd, urb->setup_packet, sizeof(struct usb_ctrlrequest)); list_add_tail(&qtd->qtd_list, head); /* for zero length DATA stages, STATUS is always IN */ if (urb->transfer_buffer_length == 0) packet_type = IN_PID; } maxpacketsize = max_packet(usb_maxpacket(urb->dev, urb->pipe)); /* * buffer gets wrapped in one or more qtds; * last one may be "short" (including zero len) * and may serve as a control status ack */ buf = urb->transfer_buffer; len = urb->transfer_buffer_length; for (;;) { int this_qtd_len; qtd = qtd_alloc(flags, urb, packet_type); if (!qtd) goto cleanup; if (len > mem->blocks_size[ISP176x_BLOCK_NUM - 1]) this_qtd_len = mem->blocks_size[ISP176x_BLOCK_NUM - 1]; else this_qtd_len = len; this_qtd_len = qtd_fill(qtd, buf, this_qtd_len); list_add_tail(&qtd->qtd_list, head); len -= this_qtd_len; buf += this_qtd_len; if (len <= 0) break; } /* * control requests may need a terminating data "status" ack; * bulk ones may need a terminating short packet (zero length). */ if (urb->transfer_buffer_length != 0) { int one_more = 0; if (usb_pipecontrol(urb->pipe)) { one_more = 1; if (packet_type == IN_PID) packet_type = OUT_PID; else packet_type = IN_PID; } else if (usb_pipebulk(urb->pipe) && maxpacketsize && (urb->transfer_flags & URB_ZERO_PACKET) && !(urb->transfer_buffer_length % maxpacketsize)) { one_more = 1; } if (one_more) { qtd = qtd_alloc(flags, urb, packet_type); if (!qtd) goto cleanup; /* never any data in such packets */ qtd_fill(qtd, NULL, 0); list_add_tail(&qtd->qtd_list, head); } } return; cleanup: qtd_list_free(head); } static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) { struct isp1760_hcd *priv = hcd_to_priv(hcd); struct isp1760_qh *qh = NULL; struct list_head *ep_queue; LIST_HEAD(new_qtds); int qh_in_queue; int retval; int epnum; switch (usb_pipetype(urb->pipe)) { case PIPE_CONTROL: ep_queue = &priv->qh_list[QH_CONTROL]; break; case PIPE_BULK: ep_queue = &priv->qh_list[QH_BULK]; break; case PIPE_INTERRUPT: ep_queue = &priv->qh_list[QH_INTERRUPT]; break; case PIPE_ISOCHRONOUS: printf("isochronous USB packets not yet supported\n"); return -EPIPE; default: printf("unknown pipe type\n"); return -EPIPE; } if (usb_pipein(urb->pipe)) urb->actual_length = 0; packetize_urb(hcd, urb, &new_qtds, mem_flags); if (list_empty(&new_qtds)) return -ENOMEM; retval = usb_hcd_link_urb_to_ep(hcd, urb); if (retval) { qtd_list_free(&new_qtds); goto out; } epnum = usb_pipeendpoint(urb->pipe); qh_in_queue = 0; list_for_each_entry(qh, ep_queue, qh_list) { if (qh->epnum == epnum) { qh_in_queue = 1; break; } } if (!qh_in_queue) { qh = qh_alloc(GFP_ATOMIC); if (!qh) { retval = -ENOMEM; usb_hcd_unlink_urb_from_ep(hcd, urb); qtd_list_free(&new_qtds); goto out; } qh->epnum = epnum; list_add_tail(&qh->qh_list, ep_queue); urb->ep->hcpriv = qh; } list_splice_tail(&new_qtds, &qh->qtd_list); schedule_ptds(hcd); out: return retval; } static void kill_transfer(struct usb_hcd *hcd, struct urb *urb, struct isp1760_qh *qh) { struct isp1760_hcd *priv = hcd_to_priv(hcd); int skip_map; WARN_ON(qh->slot == -1); /* * We need to forcefully reclaim the slot since some transfers never * return, e.g. interrupt transfers and NAKed bulk transfers. */ if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) { if (qh->slot != -1) { skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP); skip_map |= (1 << qh->slot); isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP, skip_map); ndelay(100); } priv->atl_slots[qh->slot].qh = NULL; priv->atl_slots[qh->slot].qtd = NULL; } else { if (qh->slot != -1) { skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP); skip_map |= (1 << qh->slot); isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP, skip_map); } priv->int_slots[qh->slot].qh = NULL; priv->int_slots[qh->slot].qtd = NULL; } qh->slot = -1; } /* * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing * any active transfer belonging to the urb in the process. */ static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh, struct isp1760_qtd *qtd) { struct urb *urb; int urb_was_running; urb = qtd->urb; urb_was_running = 0; list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) { if (qtd->urb != urb) break; if (qtd->status >= QTD_XFER_STARTED) urb_was_running = 1; if (last_qtd_of_urb(qtd, qh) && qtd->status >= QTD_XFER_COMPLETE) urb_was_running = 0; if (qtd->status == QTD_XFER_STARTED) kill_transfer(hcd, urb, qh); qtd->status = QTD_RETIRE; } } int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { struct isp1760_qtd *qtd; struct isp1760_qh *qh; int retval = 0; retval = usb_hcd_check_unlink_urb(hcd, urb, status); if (retval) goto out; qh = urb->ep->hcpriv; if (!qh) { retval = -EINVAL; goto out; } list_for_each_entry(qtd, &qh->qtd_list, qtd_list) if (qtd->urb == urb) { dequeue_urb_from_qtd(hcd, qh, qtd); list_move(&qtd->qtd_list, &qh->qtd_list); break; } urb->status = status; schedule_ptds(hcd); out: return retval; } static void isp1760_hub_descriptor(struct isp1760_hcd *priv, struct usb_hub_descriptor *desc) { int ports; u16 temp; ports = isp1760_hcd_n_ports(priv->hcd); desc->bDescriptorType = USB_DT_HUB; /* priv 1.0, 2.3.9 says 20ms max */ desc->bPwrOn2PwrGood = 10; desc->bHubContrCurrent = 0; desc->bNbrPorts = ports; temp = 1 + (ports / 8); desc->bLength = 7 + 2 * temp; /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ memset(&desc->u.hs.DeviceRemovable[0], 0, temp); memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); /* per-port overcurrent reporting */ temp = HUB_CHAR_INDV_PORT_OCPM; if (isp1760_hcd_ppc_is_set(priv->hcd)) /* per-port power control */ temp |= HUB_CHAR_INDV_PORT_LPSM; else /* no power switching */ temp |= HUB_CHAR_NO_LPSM; desc->wHubCharacteristics = cpu_to_le16(temp); } #define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E) static void check_reset_complete(struct usb_hcd *hcd, int index) { if (!(isp1760_hcd_is_set(hcd, PORT_CONNECT))) return; /* if reset finished and it's still not enabled -- handoff */ if (!isp1760_hcd_is_set(hcd, PORT_PE)) { printf("port %d full speed --> companion\n", index + 1); isp1760_hcd_set(hcd, PORT_OWNER); isp1760_hcd_clear(hcd, PORT_CSC); } else { printf("port %d high speed\n", index + 1); } } static int isp1760_hub_control(struct usb_hcd *hcd, struct usb_device *dev, unsigned long pipe, void *buffer, int length, struct devrequest *setup) { struct isp1760_hcd *priv = hcd_to_priv(hcd); u16 typeReq, wValue, wIndex; char *buf = buffer; void *src = NULL; int src_len = 0; int retval = 0; u32 status; int ports; if (!setup) return -EINVAL; ports = isp1760_hcd_n_ports(hcd); typeReq = setup->request | (setup->requesttype << 8); wValue = le16_to_cpu(setup->value); wIndex = le16_to_cpu(setup->index); /* * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR. * HCS_INDICATOR may say we can change LEDs to off/amber/green. * (track current state ourselves) ... blink for diagnostics, * power, "this is the one", etc. EHCI spec supports this. */ switch (typeReq) { case DeviceOutRequest | USB_REQ_SET_ADDRESS: break; case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: /* Nothing to do */ break; case DeviceRequest | USB_REQ_GET_DESCRIPTOR: switch (wValue & 0xff00) { case USB_DT_DEVICE << 8: src = &rh_descriptor.device; src_len = 0x12; break; case USB_DT_CONFIG << 8: src = &rh_descriptor.config; src_len = 0x09; break; case USB_DT_STRING << 8: switch (wValue & 0xff) { case 0: /* Language */ src = ISP1760_LANGUAGE_DESC; src_len = 4; break; case 1: /* Vendor String */ src = ISP1760_VENDOR_DESC; src_len = 14; break; case 2: /* Product Name */ src = ISP1760_PRODUCT_NAME_DESC; src_len = 42; break; default: goto error; } break; } break; case ClearHubFeature: switch (wValue) { case C_HUB_LOCAL_POWER: case C_HUB_OVER_CURRENT: /* no hub-wide feature/status flags */ break; default: goto error; } break; case ClearPortFeature: if (!wIndex || wIndex > ports) goto error; wIndex--; /* * Even if OWNER is set, so the port is owned by the * companion controller, hub_wq needs to be able to clear * the port-change status bits (especially * USB_PORT_STAT_C_CONNECTION). */ switch (wValue) { case USB_PORT_FEAT_ENABLE: isp1760_hcd_clear(hcd, PORT_PE); break; case USB_PORT_FEAT_C_ENABLE: /* XXX error? */ break; case USB_PORT_FEAT_SUSPEND: if (isp1760_hcd_is_set(hcd, PORT_RESET)) goto error; if (isp1760_hcd_is_set(hcd, PORT_SUSPEND)) { if (!isp1760_hcd_is_set(hcd, PORT_PE)) goto error; /* resume signaling for 20 msec */ isp1760_hcd_clear(hcd, PORT_CSC); isp1760_hcd_set(hcd, PORT_RESUME); priv->reset_done = get_timer(0) + 40; } break; case USB_PORT_FEAT_C_SUSPEND: /* we auto-clear this feature */ break; case USB_PORT_FEAT_POWER: if (isp1760_hcd_ppc_is_set(hcd)) isp1760_hcd_clear(hcd, PORT_POWER); break; case USB_PORT_FEAT_C_CONNECTION: isp1760_hcd_set(hcd, PORT_CSC); break; case USB_PORT_FEAT_C_OVER_CURRENT: /* XXX error ?*/ break; case USB_PORT_FEAT_C_RESET: /* GetPortStatus clears reset */ break; default: goto error; } isp1760_hcd_read(hcd, CMD_RUN); break; case GetHubDescriptor: isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)buf); break; case GetHubStatus: /* no hub-wide feature/status flags */ memset(buf, 0, 4); break; case GetPortStatus: if (!wIndex || wIndex > ports) goto error; wIndex--; status = 0; /* wPortChange bits */ if (isp1760_hcd_is_set(hcd, PORT_CSC)) status |= USB_PORT_STAT_C_CONNECTION << 16; /* whoever resumes must GetPortStatus to complete it!! */ if (isp1760_hcd_is_set(hcd, PORT_RESUME)) { status |= USB_PORT_STAT_C_SUSPEND << 16; if (!priv->reset_done) { priv->reset_done = get_timer(0) + 20; } else if (get_timer(0) > priv->reset_done) { /* stop resume signaling */ isp1760_hcd_clear(hcd, PORT_CSC); retval = isp1760_hcd_clear_and_wait(hcd, PORT_RESUME, 2000); if (retval != 0) { printf("port %d resume error %d\n", wIndex + 1, retval); goto error; } } } /* whoever resets must GetPortStatus to complete it!! */ if (isp1760_hcd_is_set(hcd, PORT_RESET) && get_timer(0) > priv->reset_done) { status |= USB_PORT_STAT_C_RESET << 16; priv->reset_done = 0; /* force reset to complete */ /* REVISIT: some hardware needs 550+ usec to clear * this bit; seems too long to spin routinely... */ retval = isp1760_hcd_clear_and_wait(hcd, PORT_RESET, 750); if (retval != 0) { printf("port %d reset error %d\n", wIndex + 1, retval); goto error; } /* see what we found out */ check_reset_complete(hcd, wIndex); } /* * Even if OWNER is set, there's no harm letting hub_wq * see the wPortStatus values (they should all be 0 except * for PORT_POWER anyway). */ if (isp1760_hcd_is_set(hcd, PORT_OWNER)) printf("PORT_OWNER is set\n"); if (isp1760_hcd_is_set(hcd, PORT_CONNECT)) { status |= USB_PORT_STAT_CONNECTION; /* status may be from integrated TT */ status |= USB_PORT_STAT_HIGH_SPEED; } if (isp1760_hcd_is_set(hcd, PORT_PE)) status |= USB_PORT_STAT_ENABLE; if (isp1760_hcd_is_set(hcd, PORT_SUSPEND) && isp1760_hcd_is_set(hcd, PORT_RESUME)) status |= USB_PORT_STAT_SUSPEND; if (isp1760_hcd_is_set(hcd, PORT_RESET)) status |= USB_PORT_STAT_RESET; if (isp1760_hcd_is_set(hcd, PORT_POWER)) status |= USB_PORT_STAT_POWER; put_unaligned(cpu_to_le32(status), (__le32 *)buf); break; case SetHubFeature: switch (wValue) { case C_HUB_LOCAL_POWER: case C_HUB_OVER_CURRENT: /* no hub-wide feature/status flags */ break; default: goto error; } break; case SetPortFeature: wIndex &= 0xff; if (!wIndex || wIndex > ports) goto error; wIndex--; if (isp1760_hcd_is_set(hcd, PORT_OWNER)) break; switch (wValue) { case USB_PORT_FEAT_ENABLE: isp1760_hcd_set(hcd, PORT_PE); break; case USB_PORT_FEAT_SUSPEND: if (!isp1760_hcd_is_set(hcd, PORT_PE) || isp1760_hcd_is_set(hcd, PORT_RESET)) goto error; isp1760_hcd_set(hcd, PORT_SUSPEND); break; case USB_PORT_FEAT_POWER: if (isp1760_hcd_ppc_is_set(hcd)) isp1760_hcd_set(hcd, PORT_POWER); break; case USB_PORT_FEAT_RESET: if (isp1760_hcd_is_set(hcd, PORT_RESUME)) goto error; /* line status bits may report this as low speed, * which can be fine if this root hub has a * transaction translator built in. */ if ((isp1760_hcd_is_set(hcd, PORT_CONNECT) && !isp1760_hcd_is_set(hcd, PORT_PE)) && (isp1760_hcd_read(hcd, PORT_LSTATUS) == 1)) { isp1760_hcd_set(hcd, PORT_OWNER); } else { isp1760_hcd_set(hcd, PORT_RESET); isp1760_hcd_clear(hcd, PORT_PE); priv->reset_done = get_timer(0) + 50; } break; default: goto error; } break; default: printf("root: unknown request: 0x%0x\n", typeReq); goto error; } if (src_len) { length = min(src_len, length); if (src && length > 0) memcpy(buffer, src, length); else printf("zero copy USB descriptor\n"); } dev->act_len = length; dev->status = 0; return 0; error: /* "stall" on error */ dev->act_len = 0; dev->status = USB_ST_STALLED; return -EPIPE; } int __init isp1760_init_kmem_once(void) { urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem", sizeof(struct urb_listitem), 0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL); if (!urb_listitem_cachep) return -ENOMEM; qtd_cachep = kmem_cache_create("isp1760_qtd", sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL); if (!qtd_cachep) goto destroy_urb_listitem; qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh), 0, SLAB_TEMPORARY | SLAB_MEM_SPREAD, NULL); if (!qh_cachep) goto destroy_qtd; return 0; destroy_qtd: kmem_cache_destroy(qtd_cachep); destroy_urb_listitem: kmem_cache_destroy(urb_listitem_cachep); return -ENOMEM; } void isp1760_deinit_kmem_cache(void) { kmem_cache_destroy(qtd_cachep); kmem_cache_destroy(qh_cachep); kmem_cache_destroy(urb_listitem_cachep); } int isp1760_hcd_lowlevel_init(struct isp1760_hcd *priv) { int ret; ret = isp1760_hc_setup(priv->hcd); if (ret < 0) return ret; ret = isp1760_run(priv->hcd); if (ret < 0) return ret; return 0; } static const struct usb_urb_ops isp1760_urb_ops = { .urb_enqueue = isp1760_urb_enqueue, .urb_dequeue = isp1760_urb_dequeue, .hub_control = isp1760_hub_control, .isr = isp1760_irq, }; int isp1760_hcd_register(struct isp1760_hcd *priv, struct resource *mem, int irq, unsigned long irqflags, struct udevice *dev) { const struct isp1760_memory_layout *mem_layout = priv->memory_layout; struct isp1760_host_data *host = dev_get_priv(dev); struct usb_hcd *hcd = &host->hcd; int ret; priv->hcd = hcd; hcd->hcd_priv = priv; priv->hcd = hcd; hcd->urb_ops = &isp1760_urb_ops; priv->atl_slots = kcalloc(mem_layout->slot_num, sizeof(struct isp1760_slotinfo), GFP_KERNEL); if (!priv->atl_slots) return -ENOMEM; priv->int_slots = kcalloc(mem_layout->slot_num, sizeof(struct isp1760_slotinfo), GFP_KERNEL); if (!priv->int_slots) { ret = -ENOMEM; goto free_atl_slots; } host->host_speed = USB_SPEED_HIGH; init_memory(priv); return 0; free_atl_slots: kfree(priv->atl_slots); return ret; } void isp1760_hcd_unregister(struct isp1760_hcd *priv) { struct isp1760_qh *qh, *qh_next; int i; for (i = 0; i < QH_END; i++) list_for_each_entry_safe(qh, qh_next, &priv->qh_list[i], qh_list) { qtd_list_free(&qh->qtd_list); list_del(&qh->qh_list); qh_free(qh); } kfree(priv->atl_slots); kfree(priv->int_slots); }