// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2017 Intel Corp. * Copyright 2019 Google LLC * * Taken partly from coreboot gpio.c * * Pinctrl is modelled as a separate device-tree node and device for each * 'community' (basically a set of GPIOs). The separate devices work together * and many functions permit any PINCTRL device to be provided as a parameter, * since the pad numbering is unique across all devices. * * Each pinctrl has a single child GPIO device to handle GPIO access and * therefore there is a simple GPIO driver included in this file. */ #define LOG_CATEGORY UCLASS_GPIO #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define GPIO_DW_SIZE(x) (sizeof(u32) * (x)) #define PAD_CFG_OFFSET(x, dw_num) ((x) + GPIO_DW_SIZE(dw_num)) #define PAD_CFG0_OFFSET(x) PAD_CFG_OFFSET(x, 0) #define PAD_CFG1_OFFSET(x) PAD_CFG_OFFSET(x, 1) #define MISCCFG_GPE0_DW0_SHIFT 8 #define MISCCFG_GPE0_DW0_MASK (0xf << MISCCFG_GPE0_DW0_SHIFT) #define MISCCFG_GPE0_DW1_SHIFT 12 #define MISCCFG_GPE0_DW1_MASK (0xf << MISCCFG_GPE0_DW1_SHIFT) #define MISCCFG_GPE0_DW2_SHIFT 16 #define MISCCFG_GPE0_DW2_MASK (0xf << MISCCFG_GPE0_DW2_SHIFT) #define GPI_SMI_STS_OFFSET(comm, group) ((comm)->gpi_smi_sts_reg_0 + \ ((group) * sizeof(u32))) #define GPI_SMI_EN_OFFSET(comm, group) ((comm)->gpi_smi_en_reg_0 + \ ((group) * sizeof(u32))) #define GPI_IS_OFFSET(comm, group) ((comm)->gpi_int_sts_reg_0 + \ ((group) * sizeof(uint32_t))) #define GPI_IE_OFFSET(comm, group) ((comm)->gpi_int_en_reg_0 + \ ((group) * sizeof(uint32_t))) /** * relative_pad_in_comm() - Get the relative position of a GPIO * * This finds the position of a GPIO within a community * * @comm: Community to search * @gpio: Pad number to look up (assumed to be valid) * Return: offset, 0 for first GPIO in community */ static size_t relative_pad_in_comm(const struct pad_community *comm, uint gpio) { return gpio - comm->first_pad; } /** * pinctrl_group_index() - Find group for a a pad * * Find the group within the community that the pad is a part of * * @comm: Community to search * @relative_pad: Pad to look up * Return: group number if found (see community_n_groups, etc.), or * -ESPIPE if no groups, or -ENOENT if not found */ static int pinctrl_group_index(const struct pad_community *comm, uint relative_pad) { int i; if (!comm->groups) return -ESPIPE; /* find the base pad number for this pad's group */ for (i = 0; i < comm->num_groups; i++) { if (relative_pad >= comm->groups[i].first_pad && relative_pad < comm->groups[i].first_pad + comm->groups[i].size) return i; } return -ENOENT; } static int pinctrl_group_index_scaled(const struct pad_community *comm, uint relative_pad, size_t scale) { int ret; ret = pinctrl_group_index(comm, relative_pad); if (ret < 0) return ret; return ret * scale; } static int pinctrl_within_group(const struct pad_community *comm, uint relative_pad) { int ret; ret = pinctrl_group_index(comm, relative_pad); if (ret < 0) return ret; return relative_pad - comm->groups[ret].first_pad; } static u32 pinctrl_bitmask_within_group(const struct pad_community *comm, uint relative_pad) { return 1U << pinctrl_within_group(comm, relative_pad); } /** * pinctrl_get_device() - Find the device for a particular pad * * Each pinctr, device is attached to one community and this supports a number * of pads. This function finds the device which controls a particular pad. * * @pad: Pad to check * @devp: Returns the device for that pad * Return: 0 if OK, -ENOTBLK if no device was found for the given pin */ static int pinctrl_get_device(uint pad, struct udevice **devp) { struct udevice *dev; /* * We have to probe each one of these since the community link is only * attached in intel_pinctrl_of_to_plat(). */ uclass_foreach_dev_probe(UCLASS_PINCTRL, dev) { struct intel_pinctrl_priv *priv = dev_get_priv(dev); const struct pad_community *comm = priv->comm; if (pad >= comm->first_pad && pad <= comm->last_pad) { *devp = dev; return 0; } } log_debug("pad %d not found\n", pad); return -ENOTBLK; } int intel_pinctrl_get_pad(uint pad, struct udevice **devp, uint *offsetp) { const struct pad_community *comm; struct intel_pinctrl_priv *priv; struct udevice *dev; int ret; ret = pinctrl_get_device(pad, &dev); if (ret) return log_msg_ret("pad", ret); priv = dev_get_priv(dev); comm = priv->comm; *devp = dev; *offsetp = relative_pad_in_comm(comm, pad); return 0; } static int pinctrl_configure_owner(struct udevice *dev, const struct pad_config *cfg, const struct pad_community *comm) { u32 hostsw_own; u16 hostsw_own_offset; int pin; int ret; pin = relative_pad_in_comm(comm, cfg->pad); /* * Based on the gpio pin number configure the corresponding bit in * HOSTSW_OWN register. Value of 0x1 indicates GPIO Driver onwership. */ hostsw_own_offset = comm->host_own_reg_0; ret = pinctrl_group_index_scaled(comm, pin, sizeof(u32)); if (ret < 0) return ret; hostsw_own_offset += ret; hostsw_own = pcr_read32(dev, hostsw_own_offset); /* *The 4th bit in pad_config 1 (RO) is used to indicate if the pad * needs GPIO driver ownership. Set the bit if GPIO driver ownership * requested, otherwise clear the bit. */ if (cfg->pad_config[1] & PAD_CFG1_GPIO_DRIVER) hostsw_own |= pinctrl_bitmask_within_group(comm, pin); else hostsw_own &= ~pinctrl_bitmask_within_group(comm, pin); pcr_write32(dev, hostsw_own_offset, hostsw_own); return 0; } static int gpi_enable_smi(struct udevice *dev, const struct pad_config *cfg, const struct pad_community *comm) { u32 value; u16 sts_reg; u16 en_reg; int group; int pin; int ret; if ((cfg->pad_config[0] & PAD_CFG0_ROUTE_SMI) != PAD_CFG0_ROUTE_SMI) return 0; pin = relative_pad_in_comm(comm, cfg->pad); ret = pinctrl_group_index(comm, pin); if (ret < 0) return ret; group = ret; sts_reg = GPI_SMI_STS_OFFSET(comm, group); value = pcr_read32(dev, sts_reg); /* Write back 1 to reset the sts bits */ pcr_write32(dev, sts_reg, value); /* Set enable bits */ en_reg = GPI_SMI_EN_OFFSET(comm, group); pcr_setbits32(dev, en_reg, pinctrl_bitmask_within_group(comm, pin)); return 0; } static int pinctrl_configure_itss(struct udevice *dev, const struct pad_config *cfg, uint pad_cfg_offset) { struct intel_pinctrl_priv *priv = dev_get_priv(dev); if (!priv->itss_pol_cfg) return -ENOSYS; int irq; /* * Set up ITSS polarity if pad is routed to APIC. * * The ITSS takes only active high interrupt signals. Therefore, * if the pad configuration indicates an inversion assume the * intent is for the ITSS polarity. Before forwarding on the * request to the APIC there's an inversion setting for how the * signal is forwarded to the APIC. Honor the inversion setting * in the GPIO pad configuration so that a hardware active low * signal looks that way to the APIC (double inversion). */ if (!(cfg->pad_config[0] & PAD_CFG0_ROUTE_IOAPIC)) return 0; irq = pcr_read32(dev, PAD_CFG1_OFFSET(pad_cfg_offset)); irq &= PAD_CFG1_IRQ_MASK; if (!irq) { if (spl_phase() > PHASE_TPL) log_err("GPIO %u doesn't support APIC routing\n", cfg->pad); return -EPROTONOSUPPORT; } irq_set_polarity(priv->itss, irq, cfg->pad_config[0] & PAD_CFG0_RX_POL_INVERT); return 0; } /* Number of DWx config registers can be different for different SOCs */ static uint pad_config_offset(struct intel_pinctrl_priv *priv, uint pad) { const struct pad_community *comm = priv->comm; size_t offset; offset = relative_pad_in_comm(comm, pad); offset *= GPIO_DW_SIZE(priv->num_cfgs); return offset + comm->pad_cfg_base; } static int pinctrl_pad_reset_config_override(const struct pad_community *comm, u32 config_value) { const struct reset_mapping *rst_map = comm->reset_map; int i; /* Logical reset values equal chipset values */ if (!rst_map || !comm->num_reset_vals) return config_value; for (i = 0; i < comm->num_reset_vals; i++, rst_map++) { if ((config_value & PAD_CFG0_RESET_MASK) == rst_map->logical) { config_value &= ~PAD_CFG0_RESET_MASK; config_value |= rst_map->chipset; return config_value; } } if (spl_phase() > PHASE_TPL) log_err("Logical-to-Chipset mapping not found\n"); return -ENOENT; } static const int mask[4] = { PAD_CFG0_TX_STATE | PAD_CFG0_TX_DISABLE | PAD_CFG0_RX_DISABLE | PAD_CFG0_MODE_MASK | PAD_CFG0_ROUTE_MASK | PAD_CFG0_RXTENCFG_MASK | PAD_CFG0_RXINV_MASK | PAD_CFG0_PREGFRXSEL | PAD_CFG0_TRIG_MASK | PAD_CFG0_RXRAW1_MASK | PAD_CFG0_RXPADSTSEL_MASK | PAD_CFG0_RESET_MASK, #ifdef CONFIG_INTEL_PINCTRL_IOSTANDBY PAD_CFG1_IOSTERM_MASK | PAD_CFG1_PULL_MASK | PAD_CFG1_IOSSTATE_MASK, #else PAD_CFG1_IOSTERM_MASK | PAD_CFG1_PULL_MASK, #endif PAD_CFG2_DEBOUNCE_MASK, 0, }; /** * pinctrl_configure_pad() - Configure a pad * * @dev: Pinctrl device containing the pad (see pinctrl_get_device()) * @cfg: Configuration to apply * Return: 0 if OK, -ve on error */ static int pinctrl_configure_pad(struct udevice *dev, const struct pad_config *cfg) { struct intel_pinctrl_priv *priv = dev_get_priv(dev); const struct pad_community *comm = priv->comm; uint config_offset; u32 pad_conf, soc_pad_conf; int ret; int i; if (IS_ERR(comm)) return PTR_ERR(comm); config_offset = pad_config_offset(priv, cfg->pad); for (i = 0; i < priv->num_cfgs; i++) { pad_conf = pcr_read32(dev, PAD_CFG_OFFSET(config_offset, i)); soc_pad_conf = cfg->pad_config[i]; if (i == 0) { ret = pinctrl_pad_reset_config_override(comm, soc_pad_conf); if (ret < 0) return ret; soc_pad_conf = ret; } soc_pad_conf &= mask[i]; soc_pad_conf |= pad_conf & ~mask[i]; log_debug("pinctrl_padcfg [0x%02x, %02zd] DW%d [0x%08x : 0x%08x : 0x%08x]\n", comm->port, relative_pad_in_comm(comm, cfg->pad), i, pad_conf,/* old value */ /* value passed from pinctrl table */ cfg->pad_config[i], soc_pad_conf); /*new value*/ pcr_write32(dev, PAD_CFG_OFFSET(config_offset, i), soc_pad_conf); } ret = pinctrl_configure_itss(dev, cfg, config_offset); if (ret && ret != -ENOSYS) return log_msg_ret("itss config failed", ret); ret = pinctrl_configure_owner(dev, cfg, comm); if (ret) return ret; ret = gpi_enable_smi(dev, cfg, comm); if (ret) return ret; return 0; } u32 intel_pinctrl_get_config_reg_offset(struct udevice *dev, uint offset) { struct intel_pinctrl_priv *priv = dev_get_priv(dev); const struct pad_community *comm = priv->comm; uint config_offset; assert(device_get_uclass_id(dev) == UCLASS_PINCTRL); config_offset = comm->pad_cfg_base + offset * GPIO_DW_SIZE(priv->num_cfgs); return config_offset; } u32 intel_pinctrl_get_config_reg_addr(struct udevice *dev, uint offset) { uint config_offset = intel_pinctrl_get_config_reg_offset(dev, offset); return (u32)(ulong)pcr_reg_address(dev, config_offset); } u32 intel_pinctrl_get_config_reg(struct udevice *dev, uint offset) { uint config_offset = intel_pinctrl_get_config_reg_offset(dev, offset); return pcr_read32(dev, config_offset); } int intel_pinctrl_get_acpi_pin(struct udevice *dev, uint offset) { struct intel_pinctrl_priv *priv = dev_get_priv(dev); const struct pad_community *comm = priv->comm; int group; if (IS_ENABLED(CONFIG_INTEL_PINCTRL_MULTI_ACPI_DEVICES)) return offset; group = pinctrl_group_index(comm, offset); /* If pad base is not set then use GPIO number as ACPI pin number */ if (comm->groups[group].acpi_pad_base == PAD_BASE_NONE) return comm->first_pad + offset; /* * If this group has a non-zero pad base then compute the ACPI pin * number from the pad base and the relative pad in the group. */ return comm->groups[group].acpi_pad_base + pinctrl_within_group(comm, offset); } int pinctrl_route_gpe(struct udevice *itss, uint gpe0b, uint gpe0c, uint gpe0d) { struct udevice *pinctrl_dev; u32 misccfg_value; u32 misccfg_clr; int ret; /* * Get the group here for community specific MISCCFG register. * If any of these returns -1 then there is some error in devicetree * where the group is probably hardcoded and does not comply with the * PMC group defines. So we return from here and MISCFG is set to * default. */ ret = irq_route_pmc_gpio_gpe(itss, gpe0b); if (ret) return ret; gpe0b = ret; ret = irq_route_pmc_gpio_gpe(itss, gpe0c); if (ret) return ret; gpe0c = ret; ret = irq_route_pmc_gpio_gpe(itss, gpe0d); if (ret) return ret; gpe0d = ret; misccfg_value = gpe0b << MISCCFG_GPE0_DW0_SHIFT; misccfg_value |= gpe0c << MISCCFG_GPE0_DW1_SHIFT; misccfg_value |= gpe0d << MISCCFG_GPE0_DW2_SHIFT; /* Program GPIO_MISCCFG */ misccfg_clr = MISCCFG_GPE0_DW2_MASK | MISCCFG_GPE0_DW1_MASK | MISCCFG_GPE0_DW0_MASK; log_debug("misccfg_clr:%x misccfg_value:%x\n", misccfg_clr, misccfg_value); uclass_foreach_dev_probe(UCLASS_PINCTRL, pinctrl_dev) { pcr_clrsetbits32(pinctrl_dev, GPIO_MISCCFG, misccfg_clr, misccfg_value); } return 0; } int pinctrl_gpi_clear_int_cfg(void) { struct udevice *dev; struct uclass *uc; int ret; ret = uclass_get(UCLASS_PINCTRL, &uc); if (ret) return log_msg_ret("pinctrl uc", ret); uclass_foreach_dev(dev, uc) { struct intel_pinctrl_priv *priv = dev_get_priv(dev); const struct pad_community *comm = priv->comm; uint sts_value; int group; for (group = 0; group < comm->num_gpi_regs; group++) { /* Clear the enable register */ pcr_write32(dev, GPI_IE_OFFSET(comm, group), 0); /* Read and clear the set status register bits*/ sts_value = pcr_read32(dev, GPI_IS_OFFSET(comm, group)); pcr_write32(dev, GPI_IS_OFFSET(comm, group), sts_value); } } return 0; } int pinctrl_config_pads(struct udevice *dev, u32 *pads, int pads_count) { struct intel_pinctrl_priv *priv = dev_get_priv(dev); const u32 *ptr; int i; log_debug("%s: pads_count=%d\n", __func__, pads_count); for (ptr = pads, i = 0; i < pads_count; ptr += 1 + priv->num_cfgs, i++) { struct udevice *pad_dev = NULL; struct pad_config *cfg; int ret; cfg = (struct pad_config *)ptr; ret = pinctrl_get_device(cfg->pad, &pad_dev); if (ret) return ret; ret = pinctrl_configure_pad(pad_dev, cfg); if (ret) return ret; } return 0; } int pinctrl_read_pads(struct udevice *dev, ofnode node, const char *prop, u32 **padsp, int *pad_countp) { struct intel_pinctrl_priv *priv = dev_get_priv(dev); u32 *pads; int size; int ret; *padsp = NULL; *pad_countp = 0; size = ofnode_read_size(node, prop); if (size < 0) return 0; pads = malloc(size); if (!pads) return -ENOMEM; size /= sizeof(fdt32_t); ret = ofnode_read_u32_array(node, prop, pads, size); if (ret) { free(pads); return ret; } *pad_countp = size / (1 + priv->num_cfgs); *padsp = pads; return 0; } int pinctrl_count_pads(struct udevice *dev, u32 *pads, int size) { struct intel_pinctrl_priv *priv = dev_get_priv(dev); int count = 0; int i; for (i = 0; i < size;) { u32 val; int j; for (val = j = 0; j < priv->num_cfgs + 1; j++) val |= pads[i + j]; if (!val) break; count++; i += priv->num_cfgs + 1; } return count; } int pinctrl_config_pads_for_node(struct udevice *dev, ofnode node) { int pads_count; u32 *pads; int ret; if (device_get_uclass_id(dev) != UCLASS_PINCTRL) return log_msg_ret("uclass", -EPROTONOSUPPORT); ret = pinctrl_read_pads(dev, node, "pads", &pads, &pads_count); if (ret) return log_msg_ret("no pads", ret); ret = pinctrl_config_pads(dev, pads, pads_count); free(pads); if (ret) return log_msg_ret("pad config", ret); return 0; } int intel_pinctrl_of_to_plat(struct udevice *dev, const struct pad_community *comm, int num_cfgs) { struct p2sb_child_plat *pplat = dev_get_parent_plat(dev); struct intel_pinctrl_priv *priv = dev_get_priv(dev); if (!comm) { if (spl_phase() > PHASE_TPL) log_err("Cannot find community for pid %d\n", pplat->pid); return -EDOM; } priv->comm = comm; priv->num_cfgs = num_cfgs; return 0; } int intel_pinctrl_probe(struct udevice *dev) { struct intel_pinctrl_priv *priv = dev_get_priv(dev); int ret; priv->itss_pol_cfg = true; ret = irq_first_device_type(X86_IRQT_ITSS, &priv->itss); if (ret) return log_msg_ret("Cannot find ITSS", ret); return 0; } const struct pinctrl_ops intel_pinctrl_ops = { /* No operations are supported, but DM expects this to be present */ };