// SPDX-License-Identifier: GPL-2.0+ /* * OMAP USB2 PHY LAYER * * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com * Written by Jean-Jacques Hiblot */ #include #include #include #include #include #include #include #include #include #include #include #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT BIT(0) #define OMAP_USB2_DISABLE_CHG_DET BIT(1) #define OMAP_DEV_PHY_PD BIT(0) #define OMAP_USB2_PHY_PD BIT(28) #define AM437X_USB2_PHY_PD BIT(0) #define AM437X_USB2_OTG_PD BIT(1) #define AM437X_USB2_OTGVDET_EN BIT(19) #define AM437X_USB2_OTGSESSEND_EN BIT(20) #define USB2PHY_DISCON_BYP_LATCH BIT(31) #define USB2PHY_ANA_CONFIG1 (0x4c) #define AM654_USB2_OTG_PD BIT(8) #define AM654_USB2_VBUS_DET_EN BIT(5) #define AM654_USB2_VBUSVALID_DET_EN BIT(4) #define USB2PHY_CHRG_DET 0x14 #define USB2PHY_USE_CHG_DET_REG BIT(29) #define USB2PHY_DIS_CHG_DET BIT(28) DECLARE_GLOBAL_DATA_PTR; struct omap_usb2_phy { struct regmap *pwr_regmap; ulong flags; void *phy_base; u32 pwr_reg_offset; }; struct usb_phy_data { const char *label; u8 flags; u32 mask; u32 power_on; u32 power_off; }; static const struct usb_phy_data omap5_usb2_data = { .label = "omap5_usb2", .flags = 0, .mask = OMAP_DEV_PHY_PD, .power_off = OMAP_DEV_PHY_PD, }; static const struct usb_phy_data dra7x_usb2_data = { .label = "dra7x_usb2", .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, .mask = OMAP_DEV_PHY_PD, .power_off = OMAP_DEV_PHY_PD, }; static const struct usb_phy_data dra7x_usb2_phy2_data = { .label = "dra7x_usb2_phy2", .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, .mask = OMAP_USB2_PHY_PD, .power_off = OMAP_USB2_PHY_PD, }; static const struct usb_phy_data am437x_usb2_data = { .label = "am437x_usb2", .flags = 0, .mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD | AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN, .power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN, .power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD, }; static const struct usb_phy_data am654_usb2_data = { .label = "am654_usb2", .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, .mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN, .power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN, .power_off = AM654_USB2_OTG_PD, }; static const struct udevice_id omap_usb2_id_table[] = { { .compatible = "ti,omap5-usb2", .data = (ulong)&omap5_usb2_data, }, { .compatible = "ti,dra7x-usb2", .data = (ulong)&dra7x_usb2_data, }, { .compatible = "ti,dra7x-usb2-phy2", .data = (ulong)&dra7x_usb2_phy2_data, }, { .compatible = "ti,am437x-usb2", .data = (ulong)&am437x_usb2_data, }, { .compatible = "ti,am654-usb2", .data = (ulong)&am654_usb2_data, }, {}, }; static int omap_usb_phy_power(struct phy *usb_phy, bool on) { struct udevice *dev = usb_phy->dev; const struct usb_phy_data *data; const struct omap_usb2_phy *phy = dev_get_priv(dev); u32 val; int rc; data = (const struct usb_phy_data *)dev_get_driver_data(dev); if (!data) return -EINVAL; rc = regmap_read(phy->pwr_regmap, phy->pwr_reg_offset, &val); if (rc) return rc; val &= ~data->mask; if (on) val |= data->power_on; else val |= data->power_off; rc = regmap_write(phy->pwr_regmap, phy->pwr_reg_offset, val); if (rc) return rc; return 0; } static int omap_usb2_phy_init(struct phy *usb_phy) { struct udevice *dev = usb_phy->dev; struct omap_usb2_phy *priv = dev_get_priv(dev); u32 val; if (priv->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { /* * * Reduce the sensitivity of internal PHY by enabling the * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This * resolves issues with certain devices which can otherwise * be prone to false disconnects. * */ val = readl(priv->phy_base + USB2PHY_ANA_CONFIG1); val |= USB2PHY_DISCON_BYP_LATCH; writel(val, priv->phy_base + USB2PHY_ANA_CONFIG1); } if (priv->flags & OMAP_USB2_DISABLE_CHG_DET) { val = readl(priv->phy_base + USB2PHY_CHRG_DET); val |= USB2PHY_USE_CHG_DET_REG | USB2PHY_DIS_CHG_DET; writel(val, priv->phy_base + USB2PHY_CHRG_DET); } return 0; } static int omap_usb2_phy_power_on(struct phy *usb_phy) { return omap_usb_phy_power(usb_phy, true); } static int omap_usb2_phy_power_off(struct phy *usb_phy) { return omap_usb_phy_power(usb_phy, false); } static int omap_usb2_phy_exit(struct phy *usb_phy) { return omap_usb_phy_power(usb_phy, false); } struct phy_ops omap_usb2_phy_ops = { .init = omap_usb2_phy_init, .power_on = omap_usb2_phy_power_on, .power_off = omap_usb2_phy_power_off, .exit = omap_usb2_phy_exit, }; static const struct soc_attr am65x_sr10_soc_devices[] = { { .family = "AM65X", .revision = "SR1.0" }, { /* sentinel */ } }; int omap_usb2_phy_probe(struct udevice *dev) { int rc; struct regmap *regmap; struct omap_usb2_phy *priv = dev_get_priv(dev); const struct usb_phy_data *data; u32 tmp[2]; data = (const struct usb_phy_data *)dev_get_driver_data(dev); if (!data) return -EINVAL; priv->phy_base = dev_read_addr_ptr(dev); if (!priv->phy_base) return -EINVAL; if (data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) priv->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT; /* * AM654x PG1.0 has a silicon bug that D+ is pulled high after * POR, which could cause enumeration failure with some USB hubs. * Disabling the USB2_PHY Charger Detect function will put D+ * into the normal state. * * Enable this workaround for AM654x PG1.0. */ if (soc_device_match(am65x_sr10_soc_devices)) priv->flags |= OMAP_USB2_DISABLE_CHG_DET; regmap = syscon_regmap_lookup_by_phandle(dev, "syscon-phy-power"); if (!IS_ERR(regmap)) { priv->pwr_regmap = regmap; rc = dev_read_u32_array(dev, "syscon-phy-power", tmp, 2); if (rc) { printf("couldn't get power reg. offset (err %d)\n", rc); return rc; } priv->pwr_reg_offset = tmp[1]; return 0; } regmap = syscon_regmap_lookup_by_phandle(dev, "ctrl-module"); if (!IS_ERR(regmap)) { priv->pwr_regmap = regmap; priv->pwr_reg_offset = 0; return 0; } printf("can't get regmap (err %ld)\n", PTR_ERR(regmap)); return PTR_ERR(regmap); } U_BOOT_DRIVER(omap_usb2_phy) = { .name = "omap_usb2_phy", .id = UCLASS_PHY, .of_match = omap_usb2_id_table, .probe = omap_usb2_phy_probe, .ops = &omap_usb2_phy_ops, .priv_auto = sizeof(struct omap_usb2_phy), };