// SPDX-License-Identifier: GPL-2.0+ /* * ENETC ethernet controller driver * Copyright 2017-2021 NXP */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "fsl_enetc.h" #define ENETC_DRIVER_NAME "enetc_eth" static int enetc_remove(struct udevice *dev); /* * sets the MAC address in IERB registers, this setting is persistent and * carried over to Linux. */ static void enetc_set_ierb_primary_mac(struct udevice *dev, int devfn, const u8 *enetaddr) { #ifdef CONFIG_ARCH_LS1028A /* * LS1028A is the only part with IERB at this time and there are plans to change * its structure, keep this LS1028A specific for now */ #define IERB_BASE 0x1f0800000ULL #define IERB_PFMAC(pf, vf, n) (IERB_BASE + 0x8000 + (pf) * 0x100 + (vf) * 8 \ + (n) * 4) static int ierb_fn_to_pf[] = {0, 1, 2, -1, -1, -1, 3}; u16 lower = *(const u16 *)(enetaddr + 4); u32 upper = *(const u32 *)enetaddr; if (ierb_fn_to_pf[devfn] < 0) return; out_le32(IERB_PFMAC(ierb_fn_to_pf[devfn], 0, 0), upper); out_le32(IERB_PFMAC(ierb_fn_to_pf[devfn], 0, 1), (u32)lower); #endif } /* sets up primary MAC addresses in DT/IERB */ void fdt_fixup_enetc_mac(void *blob) { struct pci_child_plat *ppdata; struct eth_pdata *pdata; struct udevice *dev; struct uclass *uc; char path[256]; int offset; int devfn; uclass_get(UCLASS_ETH, &uc); uclass_foreach_dev(dev, uc) { if (!dev->driver || !dev->driver->name || strcmp(dev->driver->name, ENETC_DRIVER_NAME)) continue; pdata = dev_get_plat(dev); ppdata = dev_get_parent_plat(dev); devfn = PCI_FUNC(ppdata->devfn); enetc_set_ierb_primary_mac(dev, devfn, pdata->enetaddr); snprintf(path, 256, "/soc/pcie@1f0000000/ethernet@%x,%x", PCI_DEV(ppdata->devfn), PCI_FUNC(ppdata->devfn)); offset = fdt_path_offset(blob, path); if (offset < 0) continue; fdt_setprop(blob, offset, "mac-address", pdata->enetaddr, 6); } } /* * Bind the device: * - set a more explicit name on the interface */ static int enetc_bind(struct udevice *dev) { char name[16]; static int eth_num_devices; /* * prefer using PCI function numbers to number interfaces, but these * are only available if dts nodes are present. For PCI they are * optional, handle that case too. Just in case some nodes are present * and some are not, use different naming scheme - enetc-N based on * PCI function # and enetc#N based on interface count */ if (ofnode_valid(dev_ofnode(dev))) sprintf(name, "enetc-%u", PCI_FUNC(pci_get_devfn(dev))); else sprintf(name, "enetc#%u", eth_num_devices++); device_set_name(dev, name); return 0; } /* MDIO wrappers, we're using these to drive internal MDIO to get to serdes */ static int enetc_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) { struct enetc_mdio_priv priv; priv.regs_base = bus->priv; return enetc_mdio_read_priv(&priv, addr, devad, reg); } static int enetc_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, u16 val) { struct enetc_mdio_priv priv; priv.regs_base = bus->priv; return enetc_mdio_write_priv(&priv, addr, devad, reg, val); } /* only interfaces that can pin out through serdes have internal MDIO */ static bool enetc_has_imdio(struct udevice *dev) { struct enetc_priv *priv = dev_get_priv(dev); return !!(priv->imdio.priv); } /* set up serdes for SGMII */ static int enetc_init_sgmii(struct udevice *dev) { struct enetc_priv *priv = dev_get_priv(dev); bool is2500 = false; u16 reg; if (!enetc_has_imdio(dev)) return 0; if (priv->uclass_id == PHY_INTERFACE_MODE_2500BASEX) is2500 = true; /* * Set to SGMII mode, for 1Gbps enable AN, for 2.5Gbps set fixed speed. * Although fixed speed is 1Gbps, we could be running at 2.5Gbps based * on PLL configuration. Setting 1G for 2.5G here is counter intuitive * but intentional. */ reg = ENETC_PCS_IF_MODE_SGMII; reg |= is2500 ? ENETC_PCS_IF_MODE_SPEED_1G : ENETC_PCS_IF_MODE_SGMII_AN; enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE, ENETC_PCS_IF_MODE, reg); /* Dev ability - SGMII */ enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE, ENETC_PCS_DEV_ABILITY, ENETC_PCS_DEV_ABILITY_SGMII); /* Adjust link timer for SGMII */ enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE, ENETC_PCS_LINK_TIMER1, ENETC_PCS_LINK_TIMER1_VAL); enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE, ENETC_PCS_LINK_TIMER2, ENETC_PCS_LINK_TIMER2_VAL); reg = ENETC_PCS_CR_DEF_VAL; reg |= is2500 ? ENETC_PCS_CR_RST : ENETC_PCS_CR_RESET_AN; /* restart PCS AN */ enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE, ENETC_PCS_CR, reg); return 0; } /* set up MAC for RGMII */ static void enetc_init_rgmii(struct udevice *dev, struct phy_device *phydev) { struct enetc_priv *priv = dev_get_priv(dev); u32 old_val, val; old_val = val = enetc_read_port(priv, ENETC_PM_IF_MODE); /* disable unreliable RGMII in-band signaling and force the MAC into * the speed negotiated by the PHY. */ val &= ~ENETC_PM_IF_MODE_AN_ENA; if (phydev->speed == SPEED_1000) { val &= ~ENETC_PM_IFM_SSP_MASK; val |= ENETC_PM_IFM_SSP_1000; } else if (phydev->speed == SPEED_100) { val &= ~ENETC_PM_IFM_SSP_MASK; val |= ENETC_PM_IFM_SSP_100; } else if (phydev->speed == SPEED_10) { val &= ~ENETC_PM_IFM_SSP_MASK; val |= ENETC_PM_IFM_SSP_10; } if (phydev->duplex == DUPLEX_FULL) val |= ENETC_PM_IFM_FULL_DPX; else val &= ~ENETC_PM_IFM_FULL_DPX; if (val == old_val) return; enetc_write_port(priv, ENETC_PM_IF_MODE, val); } /* set up MAC configuration for the given interface type */ static void enetc_setup_mac_iface(struct udevice *dev, struct phy_device *phydev) { struct enetc_priv *priv = dev_get_priv(dev); u32 if_mode; switch (priv->uclass_id) { case PHY_INTERFACE_MODE_RGMII: case PHY_INTERFACE_MODE_RGMII_ID: case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII_TXID: enetc_init_rgmii(dev, phydev); break; case PHY_INTERFACE_MODE_USXGMII: case PHY_INTERFACE_MODE_10GBASER: /* set ifmode to (US)XGMII */ if_mode = enetc_read_port(priv, ENETC_PM_IF_MODE); if_mode &= ~ENETC_PM_IF_IFMODE_MASK; enetc_write_port(priv, ENETC_PM_IF_MODE, if_mode); break; }; } /* set up serdes for SXGMII */ static int enetc_init_sxgmii(struct udevice *dev) { struct enetc_priv *priv = dev_get_priv(dev); if (!enetc_has_imdio(dev)) return 0; /* Dev ability - SXGMII */ enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, ENETC_PCS_DEVAD_REPL, ENETC_PCS_DEV_ABILITY, ENETC_PCS_DEV_ABILITY_SXGMII); /* Restart PCS AN */ enetc_mdio_write(&priv->imdio, ENETC_PCS_PHY_ADDR, ENETC_PCS_DEVAD_REPL, ENETC_PCS_CR, ENETC_PCS_CR_RST | ENETC_PCS_CR_RESET_AN); return 0; } /* Apply protocol specific configuration to MAC, serdes as needed */ static void enetc_start_pcs(struct udevice *dev) { struct enetc_priv *priv = dev_get_priv(dev); /* register internal MDIO for debug purposes */ if (enetc_read_port(priv, ENETC_PCAPR0) & ENETC_PCAPRO_MDIO) { priv->imdio.read = enetc_mdio_read; priv->imdio.write = enetc_mdio_write; priv->imdio.priv = priv->port_regs + ENETC_PM_IMDIO_BASE; strlcpy(priv->imdio.name, dev->name, MDIO_NAME_LEN); if (!miiphy_get_dev_by_name(priv->imdio.name)) mdio_register(&priv->imdio); } if (!ofnode_valid(dev_ofnode(dev))) { enetc_dbg(dev, "no enetc ofnode found, skipping PCS set-up\n"); return; } priv->uclass_id = dev_read_phy_mode(dev); if (priv->uclass_id == PHY_INTERFACE_MODE_NA) { enetc_dbg(dev, "phy-mode property not found, defaulting to SGMII\n"); priv->uclass_id = PHY_INTERFACE_MODE_SGMII; } switch (priv->uclass_id) { case PHY_INTERFACE_MODE_SGMII: case PHY_INTERFACE_MODE_2500BASEX: enetc_init_sgmii(dev); break; case PHY_INTERFACE_MODE_USXGMII: case PHY_INTERFACE_MODE_10GBASER: enetc_init_sxgmii(dev); break; }; } /* Configure the actual/external ethernet PHY, if one is found */ static int enetc_config_phy(struct udevice *dev) { struct enetc_priv *priv = dev_get_priv(dev); int supported; priv->phy = dm_eth_phy_connect(dev); if (!priv->phy) return -ENODEV; supported = PHY_GBIT_FEATURES | SUPPORTED_2500baseX_Full; priv->phy->supported &= supported; priv->phy->advertising &= supported; return phy_config(priv->phy); } /* * Probe ENETC driver: * - initialize port and station interface BARs */ static int enetc_probe(struct udevice *dev) { struct enetc_priv *priv = dev_get_priv(dev); int res; if (ofnode_valid(dev_ofnode(dev)) && !ofnode_is_enabled(dev_ofnode(dev))) { enetc_dbg(dev, "interface disabled\n"); return -ENODEV; } priv->enetc_txbd = memalign(ENETC_BD_ALIGN, sizeof(struct enetc_tx_bd) * ENETC_BD_CNT); priv->enetc_rxbd = memalign(ENETC_BD_ALIGN, sizeof(union enetc_rx_bd) * ENETC_BD_CNT); if (!priv->enetc_txbd || !priv->enetc_rxbd) { /* free should be able to handle NULL, just free all pointers */ free(priv->enetc_txbd); free(priv->enetc_rxbd); return -ENOMEM; } /* initialize register */ priv->regs_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, 0, 0, PCI_REGION_TYPE, 0); if (!priv->regs_base) { enetc_dbg(dev, "failed to map BAR0\n"); return -EINVAL; } priv->port_regs = priv->regs_base + ENETC_PORT_REGS_OFF; dm_pci_clrset_config16(dev, PCI_COMMAND, 0, PCI_COMMAND_MEMORY); enetc_start_pcs(dev); res = enetc_config_phy(dev); if(res) enetc_remove(dev); return res; } /* * Remove the driver from an interface: * - free up allocated memory */ static int enetc_remove(struct udevice *dev) { struct enetc_priv *priv = dev_get_priv(dev); if (miiphy_get_dev_by_name(priv->imdio.name)) mdio_unregister(&priv->imdio); free(priv->enetc_txbd); free(priv->enetc_rxbd); return 0; } /* * LS1028A is the only part with IERB at this time and there are plans to * change its structure, keep this LS1028A specific for now. */ #define LS1028A_IERB_BASE 0x1f0800000ULL #define LS1028A_IERB_PSIPMAR0(pf, vf) (LS1028A_IERB_BASE + 0x8000 \ + (pf) * 0x100 + (vf) * 8) #define LS1028A_IERB_PSIPMAR1(pf, vf) (LS1028A_IERB_PSIPMAR0(pf, vf) + 4) static int enetc_ls1028a_write_hwaddr(struct udevice *dev) { struct pci_child_plat *ppdata = dev_get_parent_plat(dev); const int devfn_to_pf[] = {0, 1, 2, -1, -1, -1, 3}; struct eth_pdata *plat = dev_get_plat(dev); int devfn = PCI_FUNC(ppdata->devfn); u8 *addr = plat->enetaddr; u32 lower, upper; int pf; if (devfn >= ARRAY_SIZE(devfn_to_pf)) return 0; pf = devfn_to_pf[devfn]; if (pf < 0) return 0; lower = *(const u16 *)(addr + 4); upper = *(const u32 *)addr; out_le32(LS1028A_IERB_PSIPMAR0(pf, 0), upper); out_le32(LS1028A_IERB_PSIPMAR1(pf, 0), lower); return 0; } static int enetc_write_hwaddr(struct udevice *dev) { struct eth_pdata *plat = dev_get_plat(dev); struct enetc_priv *priv = dev_get_priv(dev); u8 *addr = plat->enetaddr; if (IS_ENABLED(CONFIG_ARCH_LS1028A)) return enetc_ls1028a_write_hwaddr(dev); u16 lower = *(const u16 *)(addr + 4); u32 upper = *(const u32 *)addr; enetc_write_port(priv, ENETC_PSIPMAR0, upper); enetc_write_port(priv, ENETC_PSIPMAR1, lower); return 0; } /* Configure port parameters (# of rings, frame size, enable port) */ static void enetc_enable_si_port(struct enetc_priv *priv) { u32 val; /* set Rx/Tx BDR count */ val = ENETC_PSICFGR_SET_TXBDR(ENETC_TX_BDR_CNT); val |= ENETC_PSICFGR_SET_RXBDR(ENETC_RX_BDR_CNT); enetc_write_port(priv, ENETC_PSICFGR(0), val); /* set Rx max frame size */ enetc_write_port(priv, ENETC_PM_MAXFRM, ENETC_RX_MAXFRM_SIZE); /* enable MAC port */ enetc_write_port(priv, ENETC_PM_CC, ENETC_PM_CC_RX_TX_EN); /* enable port */ enetc_write_port(priv, ENETC_PMR, ENETC_PMR_SI0_EN); /* set SI cache policy */ enetc_write(priv, ENETC_SICAR0, ENETC_SICAR_RD_CFG | ENETC_SICAR_WR_CFG); /* enable SI */ enetc_write(priv, ENETC_SIMR, ENETC_SIMR_EN); } /* returns DMA address for a given buffer index */ static inline u64 enetc_rxb_address(struct udevice *dev, int i) { return cpu_to_le64(dm_pci_virt_to_mem(dev, net_rx_packets[i])); } /* * Setup a single Tx BD Ring (ID = 0): * - set Tx buffer descriptor address * - set the BD count * - initialize the producer and consumer index */ static void enetc_setup_tx_bdr(struct udevice *dev) { struct enetc_priv *priv = dev_get_priv(dev); struct bd_ring *tx_bdr = &priv->tx_bdr; u64 tx_bd_add = (u64)priv->enetc_txbd; /* used later to advance to the next Tx BD */ tx_bdr->bd_count = ENETC_BD_CNT; tx_bdr->next_prod_idx = 0; tx_bdr->next_cons_idx = 0; tx_bdr->cons_idx = priv->regs_base + ENETC_BDR(TX, ENETC_TX_BDR_ID, ENETC_TBCIR); tx_bdr->prod_idx = priv->regs_base + ENETC_BDR(TX, ENETC_TX_BDR_ID, ENETC_TBPIR); /* set Tx BD address */ enetc_bdr_write(priv, TX, ENETC_TX_BDR_ID, ENETC_TBBAR0, lower_32_bits(tx_bd_add)); enetc_bdr_write(priv, TX, ENETC_TX_BDR_ID, ENETC_TBBAR1, upper_32_bits(tx_bd_add)); /* set Tx 8 BD count */ enetc_bdr_write(priv, TX, ENETC_TX_BDR_ID, ENETC_TBLENR, tx_bdr->bd_count); /* reset both producer/consumer indexes */ enetc_write_reg(tx_bdr->cons_idx, tx_bdr->next_cons_idx); enetc_write_reg(tx_bdr->prod_idx, tx_bdr->next_prod_idx); /* enable TX ring */ enetc_bdr_write(priv, TX, ENETC_TX_BDR_ID, ENETC_TBMR, ENETC_TBMR_EN); } /* * Setup a single Rx BD Ring (ID = 0): * - set Rx buffer descriptors address (one descriptor per buffer) * - set buffer size as max frame size * - enable Rx ring * - reset consumer and producer indexes * - set buffer for each descriptor */ static void enetc_setup_rx_bdr(struct udevice *dev) { struct enetc_priv *priv = dev_get_priv(dev); struct bd_ring *rx_bdr = &priv->rx_bdr; u64 rx_bd_add = (u64)priv->enetc_rxbd; int i; /* used later to advance to the next BD produced by ENETC HW */ rx_bdr->bd_count = ENETC_BD_CNT; rx_bdr->next_prod_idx = 0; rx_bdr->next_cons_idx = 0; rx_bdr->cons_idx = priv->regs_base + ENETC_BDR(RX, ENETC_RX_BDR_ID, ENETC_RBCIR); rx_bdr->prod_idx = priv->regs_base + ENETC_BDR(RX, ENETC_RX_BDR_ID, ENETC_RBPIR); /* set Rx BD address */ enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBBAR0, lower_32_bits(rx_bd_add)); enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBBAR1, upper_32_bits(rx_bd_add)); /* set Rx BD count (multiple of 8) */ enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBLENR, rx_bdr->bd_count); /* set Rx buffer size */ enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBBSR, PKTSIZE_ALIGN); /* fill Rx BD */ memset(priv->enetc_rxbd, 0, rx_bdr->bd_count * sizeof(union enetc_rx_bd)); for (i = 0; i < rx_bdr->bd_count; i++) { priv->enetc_rxbd[i].w.addr = enetc_rxb_address(dev, i); /* each RX buffer must be aligned to 64B */ WARN_ON(priv->enetc_rxbd[i].w.addr & (ARCH_DMA_MINALIGN - 1)); } /* reset producer (ENETC owned) and consumer (SW owned) index */ enetc_write_reg(rx_bdr->cons_idx, rx_bdr->next_cons_idx); enetc_write_reg(rx_bdr->prod_idx, rx_bdr->next_prod_idx); /* enable Rx ring */ enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBMR, ENETC_RBMR_EN); } /* * Start ENETC interface: * - perform FLR * - enable access to port and SI registers * - set mac address * - setup TX/RX buffer descriptors * - enable Tx/Rx rings */ static int enetc_start(struct udevice *dev) { struct enetc_priv *priv = dev_get_priv(dev); /* reset and enable the PCI device */ dm_pci_flr(dev); dm_pci_clrset_config16(dev, PCI_COMMAND, 0, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); enetc_enable_si_port(priv); /* setup Tx/Rx buffer descriptors */ enetc_setup_tx_bdr(dev); enetc_setup_rx_bdr(dev); enetc_setup_mac_iface(dev, priv->phy); return phy_startup(priv->phy); } /* * Stop the network interface: * - just quiesce it, we can wipe all configuration as _start starts from * scratch each time */ static void enetc_stop(struct udevice *dev) { /* FLR is sufficient to quiesce the device */ dm_pci_flr(dev); /* leave the BARs accessible after we stop, this is needed to use * internal MDIO in command line. */ dm_pci_clrset_config16(dev, PCI_COMMAND, 0, PCI_COMMAND_MEMORY); } /* * ENETC transmit packet: * - check if Tx BD ring is full * - set buffer/packet address (dma address) * - set final fragment flag * - try while producer index equals consumer index or timeout */ static int enetc_send(struct udevice *dev, void *packet, int length) { struct enetc_priv *priv = dev_get_priv(dev); struct bd_ring *txr = &priv->tx_bdr; void *nv_packet = (void *)packet; int tries = ENETC_POLL_TRIES; u32 pi, ci; pi = txr->next_prod_idx; ci = enetc_read_reg(txr->cons_idx) & ENETC_BDR_IDX_MASK; /* Tx ring is full when */ if (((pi + 1) % txr->bd_count) == ci) { enetc_dbg(dev, "Tx BDR full\n"); return -ETIMEDOUT; } enetc_dbg(dev, "TxBD[%d]send: pkt_len=%d, buff @0x%x%08x\n", pi, length, upper_32_bits((u64)nv_packet), lower_32_bits((u64)nv_packet)); /* prepare Tx BD */ memset(&priv->enetc_txbd[pi], 0x0, sizeof(struct enetc_tx_bd)); priv->enetc_txbd[pi].addr = cpu_to_le64(dm_pci_virt_to_mem(dev, nv_packet)); priv->enetc_txbd[pi].buf_len = cpu_to_le16(length); priv->enetc_txbd[pi].frm_len = cpu_to_le16(length); priv->enetc_txbd[pi].flags = cpu_to_le16(ENETC_TXBD_FLAGS_F); dmb(); /* send frame: increment producer index */ pi = (pi + 1) % txr->bd_count; txr->next_prod_idx = pi; enetc_write_reg(txr->prod_idx, pi); while ((--tries >= 0) && (pi != (enetc_read_reg(txr->cons_idx) & ENETC_BDR_IDX_MASK))) udelay(10); return tries > 0 ? 0 : -ETIMEDOUT; } /* * Receive frame: * - wait for the next BD to get ready bit set * - clean up the descriptor * - move on and indicate to HW that the cleaned BD is available for Rx */ static int enetc_recv(struct udevice *dev, int flags, uchar **packetp) { struct enetc_priv *priv = dev_get_priv(dev); struct bd_ring *rxr = &priv->rx_bdr; int tries = ENETC_POLL_TRIES; int pi = rxr->next_prod_idx; int ci = rxr->next_cons_idx; u32 status; int len; u8 rdy; do { dmb(); status = le32_to_cpu(priv->enetc_rxbd[pi].r.lstatus); /* check if current BD is ready to be consumed */ rdy = ENETC_RXBD_STATUS_R(status); } while (--tries >= 0 && !rdy); if (!rdy) return -EAGAIN; dmb(); len = le16_to_cpu(priv->enetc_rxbd[pi].r.buf_len); *packetp = (uchar *)enetc_rxb_address(dev, pi); enetc_dbg(dev, "RxBD[%d]: len=%d err=%d pkt=0x%x%08x\n", pi, len, ENETC_RXBD_STATUS_ERRORS(status), upper_32_bits((u64)*packetp), lower_32_bits((u64)*packetp)); /* BD clean up and advance to next in ring */ memset(&priv->enetc_rxbd[pi], 0, sizeof(union enetc_rx_bd)); priv->enetc_rxbd[pi].w.addr = enetc_rxb_address(dev, pi); rxr->next_prod_idx = (pi + 1) % rxr->bd_count; ci = (ci + 1) % rxr->bd_count; rxr->next_cons_idx = ci; dmb(); /* free up the slot in the ring for HW */ enetc_write_reg(rxr->cons_idx, ci); return len; } static const struct eth_ops enetc_ops = { .start = enetc_start, .send = enetc_send, .recv = enetc_recv, .stop = enetc_stop, .write_hwaddr = enetc_write_hwaddr, }; U_BOOT_DRIVER(eth_enetc) = { .name = ENETC_DRIVER_NAME, .id = UCLASS_ETH, .bind = enetc_bind, .probe = enetc_probe, .remove = enetc_remove, .ops = &enetc_ops, .priv_auto = sizeof(struct enetc_priv), .plat_auto = sizeof(struct eth_pdata), }; static struct pci_device_id enetc_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, PCI_DEVICE_ID_ENETC_ETH) }, {} }; U_BOOT_PCI_DEVICE(eth_enetc, enetc_ids);