// SPDX-License-Identifier: GPL-2.0 /* Copyright 2016-2019, 2021 NXP */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/sleep.h" #include #include #include #include #include #ifdef CONFIG_U_QE #include #endif DECLARE_GLOBAL_DATA_PTR; static void ddrmc_init(void) { #if (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) struct ccsr_ddr *ddr = (struct ccsr_ddr *)CFG_SYS_FSL_DDR_ADDR; u32 temp_sdram_cfg, tmp; out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG); out_be32(&ddr->cs0_bnds, DDR_CS0_BNDS); out_be32(&ddr->cs0_config, DDR_CS0_CONFIG); out_be32(&ddr->timing_cfg_0, DDR_TIMING_CFG_0); out_be32(&ddr->timing_cfg_1, DDR_TIMING_CFG_1); out_be32(&ddr->timing_cfg_2, DDR_TIMING_CFG_2); out_be32(&ddr->timing_cfg_3, DDR_TIMING_CFG_3); out_be32(&ddr->timing_cfg_4, DDR_TIMING_CFG_4); out_be32(&ddr->timing_cfg_5, DDR_TIMING_CFG_5); #ifdef CONFIG_DEEP_SLEEP if (is_warm_boot()) { out_be32(&ddr->sdram_cfg_2, DDR_SDRAM_CFG_2 & ~SDRAM_CFG2_D_INIT); out_be32(&ddr->init_addr, CFG_SYS_SDRAM_BASE); out_be32(&ddr->init_ext_addr, (1 << 31)); /* DRAM VRef will not be trained */ out_be32(&ddr->ddr_cdr2, DDR_DDR_CDR2 & ~DDR_CDR2_VREF_TRAIN_EN); } else #endif { out_be32(&ddr->sdram_cfg_2, DDR_SDRAM_CFG_2); out_be32(&ddr->ddr_cdr2, DDR_DDR_CDR2); } out_be32(&ddr->sdram_mode, DDR_SDRAM_MODE); out_be32(&ddr->sdram_mode_2, DDR_SDRAM_MODE_2); out_be32(&ddr->sdram_interval, DDR_SDRAM_INTERVAL); out_be32(&ddr->ddr_wrlvl_cntl, DDR_DDR_WRLVL_CNTL); out_be32(&ddr->ddr_wrlvl_cntl_2, DDR_DDR_WRLVL_CNTL_2); out_be32(&ddr->ddr_wrlvl_cntl_3, DDR_DDR_WRLVL_CNTL_3); out_be32(&ddr->ddr_cdr1, DDR_DDR_CDR1); out_be32(&ddr->sdram_clk_cntl, DDR_SDRAM_CLK_CNTL); out_be32(&ddr->ddr_zq_cntl, DDR_DDR_ZQ_CNTL); out_be32(&ddr->cs0_config_2, DDR_CS0_CONFIG_2); /* DDR erratum A-009942 */ tmp = in_be32(&ddr->debug[28]); out_be32(&ddr->debug[28], tmp | 0x0070006f); udelay(1); #ifdef CONFIG_DEEP_SLEEP if (is_warm_boot()) { /* enter self-refresh */ temp_sdram_cfg = in_be32(&ddr->sdram_cfg_2); temp_sdram_cfg |= SDRAM_CFG2_FRC_SR; out_be32(&ddr->sdram_cfg_2, temp_sdram_cfg); temp_sdram_cfg = (DDR_SDRAM_CFG_MEM_EN | SDRAM_CFG_BI); } else #endif temp_sdram_cfg = (DDR_SDRAM_CFG_MEM_EN & ~SDRAM_CFG_BI); out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG | temp_sdram_cfg); #ifdef CONFIG_DEEP_SLEEP if (is_warm_boot()) { /* exit self-refresh */ temp_sdram_cfg = in_be32(&ddr->sdram_cfg_2); temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR; out_be32(&ddr->sdram_cfg_2, temp_sdram_cfg); } #endif #endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */ } int dram_init(void) { ddrmc_init(); erratum_a008850_post(); gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); #if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) fsl_dp_resume(); #endif return 0; } int board_eth_init(struct bd_info *bis) { return pci_eth_init(bis); } int board_early_init_f(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_FSL_SCFG_ADDR; #ifdef CONFIG_TSEC_ENET /* * Clear BD & FR bits for big endian BD's and frame data (aka set * correct eTSEC endianness). This is crucial in ensuring that it does * not report Data Parity Errors in its RX/TX FIFOs when attempting to * send traffic. */ clrbits_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR); /* EC3_GTX_CLK125 (of enet2) used for all RGMII interfaces */ out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125); #endif arch_soc_init(); #if defined(CONFIG_DEEP_SLEEP) if (is_warm_boot()) { timer_init(); dram_init(); } #endif return 0; } #ifdef CONFIG_SPL_BUILD void board_init_f(ulong dummy) { void (*second_uboot)(void); /* Clear the BSS */ memset(__bss_start, 0, __bss_end - __bss_start); get_clocks(); #if defined(CONFIG_DEEP_SLEEP) if (is_warm_boot()) fsl_dp_disable_console(); #endif preloader_console_init(); dram_init(); /* Allow OCRAM access permission as R/W */ #ifdef CONFIG_LAYERSCAPE_NS_ACCESS enable_layerscape_ns_access(); enable_layerscape_ns_access(); #endif /* * if it is woken up from deep sleep, then jump to second * stage U-Boot and continue executing without recopying * it from SD since it has already been reserved in memory * in last boot. */ if (is_warm_boot()) { second_uboot = (void (*)(void))CONFIG_TEXT_BASE; second_uboot(); } board_init_r(NULL, 0); } #endif int board_init(void) { #ifndef CONFIG_SYS_FSL_NO_SERDES fsl_serdes_init(); #endif ls102xa_smmu_stream_id_init(); #ifdef CONFIG_LAYERSCAPE_NS_ACCESS enable_layerscape_ns_access(); #endif #ifdef CONFIG_U_QE u_qe_init(); #endif return 0; } #if defined(CONFIG_SPL_BUILD) void spl_board_init(void) { ls102xa_smmu_stream_id_init(); } #endif #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) { #ifdef CONFIG_CHAIN_OF_TRUST fsl_setenv_chain_of_trust(); #endif return 0; } #endif #if defined(CONFIG_MISC_INIT_R) int misc_init_r(void) { #ifdef CONFIG_FSL_DEVICE_DISABLE device_disable(devdis_tbl, ARRAY_SIZE(devdis_tbl)); #endif return 0; } #endif #if defined(CONFIG_DEEP_SLEEP) void board_sleep_prepare(void) { #ifdef CONFIG_LAYERSCAPE_NS_ACCESS enable_layerscape_ns_access(); #endif } #endif int ft_board_setup(void *blob, struct bd_info *bd) { ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif return 0; }