// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2016 Stefan Roese * Copyright (C) 2016 George McCollister */ #include #include #include /* ALC262 Verb Table - 10EC0262 */ static const u32 verb_table_data13[] = { /* Pin Complex (NID 0x11) */ 0x01171cf0, 0x01171d11, 0x01171e11, 0x01171f41, /* Pin Complex (NID 0x12) */ 0x01271cf0, 0x01271d11, 0x01271e11, 0x01271f41, /* Pin Complex (NID 0x14) */ 0x01471c10, 0x01471d40, 0x01471e01, 0x01471f01, /* Pin Complex (NID 0x15) */ 0x01571cf0, 0x01571d11, 0x01571e11, 0x01571f41, /* Pin Complex (NID 0x16) */ 0x01671cf0, 0x01671d11, 0x01671e11, 0x01671f41, /* Pin Complex (NID 0x18) */ 0x01871c20, 0x01871d98, 0x01871ea1, 0x01871f01, /* Pin Complex (NID 0x19) */ 0x01971c21, 0x01971d98, 0x01971ea1, 0x01971f02, /* Pin Complex (NID 0x1A) */ 0x01a71c2f, 0x01a71d30, 0x01a71e81, 0x01a71f01, /* Pin Complex */ 0x01b71c1f, 0x01b71d40, 0x01b71e21, 0x01b71f02, /* Pin Complex */ 0x01c71cf0, 0x01c71d11, 0x01c71e11, 0x01c71f41, /* Pin Complex */ 0x01d71c01, 0x01d71dc6, 0x01d71e14, 0x01d71f40, /* Pin Complex */ 0x01e71cf0, 0x01e71d11, 0x01e71e11, 0x01e71f41, /* Pin Complex */ 0x01f71cf0, 0x01f71d11, 0x01f71e11, 0x01f71f41, }; /* * This needs to be in ROM since if we put it in CAR, FSP init loses it when * it drops CAR. * * VerbTable: (RealTek ALC262) * Revision ID = 0xFF, support all steps * Codec Verb Table For AZALIA * Codec Address: CAd value (0/1/2) * Codec Vendor: 0x10EC0262 */ static const struct azalia_verb_table azalia_verb_table[] = { { { 0x10ec0262, 0x0000, 0xff, 0x01, 0x000b, 0x0002, }, verb_table_data13 } }; static const struct azalia_config azalia_config = { .pme_enable = 1, .docking_supported = 1, .docking_attached = 0, .hdmi_codec_enable = 1, .azalia_v_ci_enable = 1, .rsvdbits = 0, .verb_table_num = 1, .verb_table = azalia_verb_table, .reset_wait_timer_ms = 300 }; void update_fsp_azalia_configs(const struct azalia_config **azalia) { *azalia = &azalia_config; } int board_early_init_f(void) { /* * The FSP enables the BayTrail internal legacy UART (again). * Disable it again, so that the one on the EC can be used. */ setup_internal_uart(0); return 0; }