// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2014, Bin Meng */ /dts-v1/; #include #include #include /include/ "skeleton.dtsi" /include/ "serial.dtsi" /include/ "reset.dtsi" /include/ "rtc.dtsi" #include "tsc_timer.dtsi" #include "smbios.dtsi" / { model = "Intel Minnowboard Max"; compatible = "intel,minnowmax", "intel,baytrail"; aliases { serial0 = &serial; spi0 = &spi; }; config { silent_console = <0>; }; pch_pinctrl { compatible = "intel,x86-pinctrl"; reg = <0 0>; /* GPIO E0 */ soc_gpio_s5_0@0 { gpio-offset = <0x80 0>; mode-gpio; output-value = <0>; direction = ; }; /* GPIO E1 */ soc_gpio_s5_1@0 { gpio-offset = <0x80 1>; mode-gpio; output-value = <0>; direction = ; }; /* GPIO E2 */ soc_gpio_s5_2@0 { gpio-offset = <0x80 2>; mode-gpio; output-value = <0>; direction = ; }; pin_usb_host_en0@0 { gpio-offset = <0x80 8>; mode-gpio; output-value = <1>; direction = ; }; pin_usb_host_en1@0 { gpio-offset = <0x80 9>; mode-gpio; output-value = <1>; direction = ; }; /* * As of today, the latest version FSP (gold4) for BayTrail * misses the PAD configuration of the SD controller's Card * Detect signal. The default PAD value for the CD pin sets * the pin to work in GPIO mode, which causes card detect * status cannot be reflected by the Present State register * in the SD controller (bit 16 & bit 18 are always zero). * * Configure this pin to function 1 (SD controller). */ sdmmc3_cd@0 { pad-offset = <0x3a0>; mode-func = <1>; }; }; chosen { stdout-path = "/serial"; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { device_type = "cpu"; compatible = "intel,baytrail-cpu"; reg = <0>; intel,apic-id = <0>; }; cpu@1 { device_type = "cpu"; compatible = "intel,baytrail-cpu"; reg = <1>; intel,apic-id = <4>; }; }; pci { compatible = "intel,pci-baytrail", "pci-x86"; #address-cells = <3>; #size-cells = <2>; bootph-all; ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000 0x01000000 0x0 0x2000 0x2000 0 0xe000>; pch@1f,0 { reg = <0x0000f800 0 0 0 0>; compatible = "pci8086,0f1c", "intel,pch9"; #address-cells = <1>; #size-cells = <1>; irq-router { compatible = "intel,irq-router"; intel,pirq-config = "ibase"; intel,ibase-offset = <0x50>; intel,actl-addr = <0>; intel,pirq-link = <8 8>; intel,pirq-mask = <0xdee0>; intel,pirq-routing = < /* BayTrail PCI devices */ PCI_BDF(0, 2, 0) INTA PIRQA PCI_BDF(0, 3, 0) INTA PIRQA PCI_BDF(0, 16, 0) INTA PIRQA PCI_BDF(0, 17, 0) INTA PIRQA PCI_BDF(0, 18, 0) INTA PIRQA PCI_BDF(0, 19, 0) INTA PIRQA PCI_BDF(0, 20, 0) INTA PIRQA PCI_BDF(0, 21, 0) INTA PIRQA PCI_BDF(0, 22, 0) INTA PIRQA PCI_BDF(0, 23, 0) INTA PIRQA PCI_BDF(0, 24, 0) INTA PIRQA PCI_BDF(0, 24, 1) INTC PIRQC PCI_BDF(0, 24, 2) INTD PIRQD PCI_BDF(0, 24, 3) INTB PIRQB PCI_BDF(0, 24, 4) INTA PIRQA PCI_BDF(0, 24, 5) INTC PIRQC PCI_BDF(0, 24, 6) INTD PIRQD PCI_BDF(0, 24, 7) INTB PIRQB PCI_BDF(0, 26, 0) INTA PIRQA PCI_BDF(0, 27, 0) INTA PIRQA PCI_BDF(0, 28, 0) INTA PIRQA PCI_BDF(0, 28, 1) INTB PIRQB PCI_BDF(0, 28, 2) INTC PIRQC PCI_BDF(0, 28, 3) INTD PIRQD PCI_BDF(0, 29, 0) INTA PIRQA PCI_BDF(0, 30, 0) INTA PIRQA PCI_BDF(0, 30, 1) INTD PIRQD PCI_BDF(0, 30, 2) INTB PIRQB PCI_BDF(0, 30, 3) INTC PIRQC PCI_BDF(0, 30, 4) INTD PIRQD PCI_BDF(0, 30, 5) INTB PIRQB PCI_BDF(0, 31, 3) INTB PIRQB /* * PCIe root ports downstream * interrupts */ PCI_BDF(1, 0, 0) INTA PIRQA PCI_BDF(1, 0, 0) INTB PIRQB PCI_BDF(1, 0, 0) INTC PIRQC PCI_BDF(1, 0, 0) INTD PIRQD PCI_BDF(2, 0, 0) INTA PIRQB PCI_BDF(2, 0, 0) INTB PIRQC PCI_BDF(2, 0, 0) INTC PIRQD PCI_BDF(2, 0, 0) INTD PIRQA PCI_BDF(3, 0, 0) INTA PIRQC PCI_BDF(3, 0, 0) INTB PIRQD PCI_BDF(3, 0, 0) INTC PIRQA PCI_BDF(3, 0, 0) INTD PIRQB PCI_BDF(4, 0, 0) INTA PIRQD PCI_BDF(4, 0, 0) INTB PIRQA PCI_BDF(4, 0, 0) INTC PIRQB PCI_BDF(4, 0, 0) INTD PIRQC >; }; spi: spi { #address-cells = <1>; #size-cells = <0>; compatible = "intel,ich9-spi"; spi-flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; m25p,fast-read; compatible = "stmicro,n25q064a", "jedec,spi-nor"; memory-map = <0xff800000 0x00800000>; rw-mrc-cache { label = "rw-mrc-cache"; reg = <0x005f0000 0x00010000>; }; }; }; gpioa { compatible = "intel,ich6-gpio"; bootph-all; reg = <0 0x20>; bank-name = "A"; use-lvl-write-cache; }; gpiob { compatible = "intel,ich6-gpio"; bootph-all; reg = <0x20 0x20>; bank-name = "B"; use-lvl-write-cache; }; gpioc { compatible = "intel,ich6-gpio"; bootph-all; reg = <0x40 0x20>; bank-name = "C"; use-lvl-write-cache; }; gpiod { compatible = "intel,ich6-gpio"; bootph-all; reg = <0x60 0x20>; bank-name = "D"; use-lvl-write-cache; }; gpioe { compatible = "intel,ich6-gpio"; bootph-all; reg = <0x80 0x20>; bank-name = "E"; use-lvl-write-cache; }; gpiof { compatible = "intel,ich6-gpio"; bootph-all; reg = <0xA0 0x20>; bank-name = "F"; use-lvl-write-cache; }; }; }; fsp { compatible = "intel,baytrail-fsp"; fsp,mrc-init-tseg-size = ; fsp,mrc-init-mmio-size = ; fsp,mrc-init-spd-addr1 = <0xa0>; fsp,mrc-init-spd-addr2 = <0xa2>; fsp,emmc-boot-mode = ; fsp,enable-sdio; fsp,enable-sdcard; fsp,enable-hsuart1; fsp,enable-spi; fsp,enable-sata; fsp,sata-mode = ; #ifdef CONFIG_USB_XHCI_HCD fsp,enable-xhci; #endif fsp,lpe-mode = ; fsp,lpss-sio-mode = ; fsp,enable-dma0; fsp,enable-dma1; fsp,enable-i2c0; fsp,enable-i2c1; fsp,enable-i2c2; fsp,enable-i2c3; fsp,enable-i2c4; fsp,enable-i2c5; fsp,enable-i2c6; fsp,enable-pwm0; fsp,enable-pwm1; fsp,igd-dvmt50-pre-alloc = ; fsp,aperture-size = ; fsp,gtt-size = ; fsp,scc-mode = ; fsp,os-selection = ; fsp,emmc45-ddr50-enabled; fsp,emmc45-retune-timer-value = <8>; fsp,enable-igd; fsp,enable-memory-down; fsp,memory-down-params { compatible = "intel,baytrail-fsp-mdp"; fsp,dram-speed = ; fsp,dram-type = ; fsp,dimm-0-enable; fsp,dimm-width = ; fsp,dimm-density = ; fsp,dimm-bus-width = ; fsp,dimm-sides = ; fsp,dimm-tcl = <0xb>; fsp,dimm-trpt-rcd = <0xb>; fsp,dimm-twr = <0xc>; fsp,dimm-twtr = <6>; fsp,dimm-trrd = <6>; fsp,dimm-trtp = <6>; fsp,dimm-tfaw = <0x14>; }; }; microcode { update@0 { #include "microcode/m0130673325.dtsi" }; update@1 { #include "microcode/m0130679907.dtsi" }; }; };