/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2017 Andes Technology Corporation * Rick Chen, Andes Technology Corporation * */ #ifndef __ASM_RISCV_IO_H #define __ASM_RISCV_IO_H #include #include #include static inline void sync(void) { } #define __arch_getb(a) (*(volatile unsigned char *)(a)) #define __arch_getw(a) (*(volatile unsigned short *)(a)) #define __arch_getl(a) (*(volatile unsigned int *)(a)) #define __arch_getq(a) (*(volatile unsigned long long *)(a)) #define __arch_putb(v, a) (*(volatile unsigned char *)(a) = (v)) #define __arch_putw(v, a) (*(volatile unsigned short *)(a) = (v)) #define __arch_putl(v, a) (*(volatile unsigned int *)(a) = (v)) #define __arch_putq(v, a) (*(volatile unsigned long long *)(a) = (v)) #define __raw_writeb(v, a) __arch_putb(v, a) #define __raw_writew(v, a) __arch_putw(v, a) #define __raw_writel(v, a) __arch_putl(v, a) #define __raw_writeq(v, a) __arch_putq(v, a) #define __raw_readb(a) __arch_getb(a) #define __raw_readw(a) __arch_getw(a) #define __raw_readl(a) __arch_getl(a) #define __raw_readq(a) __arch_getq(a) /* adding for cadence_qspi_apb.c */ #define memcpy_fromio(a, c, l) memcpy((a), (c), (l)) #define memcpy_toio(c, a, l) memcpy((c), (a), (l)) #define dmb() mb() #define __iormb() rmb() #define __iowmb() wmb() static inline void writeb(u8 val, volatile void __iomem *addr) { __iowmb(); __arch_putb(val, addr); } static inline void writew(u16 val, volatile void __iomem *addr) { __iowmb(); __arch_putw(val, addr); } static inline void writel(u32 val, volatile void __iomem *addr) { __iowmb(); __arch_putl(val, addr); } static inline void writeq(u64 val, volatile void __iomem *addr) { __iowmb(); __arch_putq(val, addr); } static inline u8 readb(const volatile void __iomem *addr) { u8 val; val = __arch_getb(addr); __iormb(); return val; } static inline u16 readw(const volatile void __iomem *addr) { u16 val; val = __arch_getw(addr); __iormb(); return val; } static inline u32 readl(const volatile void __iomem *addr) { u32 val; val = __arch_getl(addr); __iormb(); return val; } static inline u64 readq(const volatile void __iomem *addr) { u64 val; val = __arch_getq(addr); __iormb(); return val; } /* * The compiler seems to be incapable of optimising constants * properly. Spell it out to the compiler in some cases. * These are only valid for small values of "off" (< 1<<12) */ #define __raw_base_writeb(val, base, off) __arch_base_putb(val, base, off) #define __raw_base_writew(val, base, off) __arch_base_putw(val, base, off) #define __raw_base_writel(val, base, off) __arch_base_putl(val, base, off) #define __raw_base_readb(base, off) __arch_base_getb(base, off) #define __raw_base_readw(base, off) __arch_base_getw(base, off) #define __raw_base_readl(base, off) __arch_base_getl(base, off) #define out_arch(type, endian, a, v) __raw_write##type(cpu_to_##endian(v), a) #define in_arch(type, endian, a) endian##_to_cpu(__raw_read##type(a)) #define out_le32(a, v) out_arch(l, le32, a, v) #define out_le16(a, v) out_arch(w, le16, a, v) #define in_le32(a) in_arch(l, le32, a) #define in_le16(a) in_arch(w, le16, a) #define out_be32(a, v) out_arch(l, be32, a, v) #define out_be16(a, v) out_arch(w, be16, a, v) #define in_be32(a) in_arch(l, be32, a) #define in_be16(a) in_arch(w, be16, a) #define out_8(a, v) __raw_writeb(v, a) #define in_8(a) __raw_readb(a) /* * Clear and set bits in one shot. These macros can be used to clear and * set multiple bits in a register using a single call. These macros can * also be used to set a multiple-bit bit pattern using a mask, by * specifying the mask in the 'clear' parameter and the new bit pattern * in the 'set' parameter. */ #define clrbits(type, addr, clear) \ out_##type((addr), in_##type(addr) & ~(clear)) #define setbits(type, addr, set) \ out_##type((addr), in_##type(addr) | (set)) #define clrsetbits(type, addr, clear, set) \ out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) #define clrbits_be32(addr, clear) clrbits(be32, addr, clear) #define setbits_be32(addr, set) setbits(be32, addr, set) #define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) #define clrbits_le32(addr, clear) clrbits(le32, addr, clear) #define setbits_le32(addr, set) setbits(le32, addr, set) #define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) #define clrbits_be16(addr, clear) clrbits(be16, addr, clear) #define setbits_be16(addr, set) setbits(be16, addr, set) #define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) #define clrbits_le16(addr, clear) clrbits(le16, addr, clear) #define setbits_le16(addr, set) setbits(le16, addr, set) #define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) #define clrbits_8(addr, clear) clrbits(8, addr, clear) #define setbits_8(addr, set) setbits(8, addr, set) #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) /* * Now, pick up the machine-defined IO definitions * #include */ /* * IO port access primitives * ------------------------- * * The RISC-V doesn't have special IO access instructions just like ARM; * all IO is memory mapped. * Note that these are defined to perform little endian accesses * only. Their primary purpose is to access PCI and ISA peripherals. * * Note that for a big endian machine, this implies that the following * big endian mode connectivity is in place, as described by numerious * ARM documents: * * PCI: D0-D7 D8-D15 D16-D23 D24-D31 * ARM: D24-D31 D16-D23 D8-D15 D0-D7 * * The machine specific io.h include defines __io to translate an "IO" * address to a memory address. * * Note that we prevent GCC re-ordering or caching values in expressions * by introducing sequence points into the in*() definitions. Note that * __raw_* do not guarantee this behaviour. * * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space. */ #ifdef __io #define outb(v, p) __raw_writeb(v, __io(p)) #define outw(v, p) __raw_writew(cpu_to_le16(v), __io(p)) #define outl(v, p) __raw_writel(cpu_to_le32(v), __io(p)) #define inb(p) ({ unsigned int __v = __raw_readb(__io(p)); __v; }) #define inw(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(__io(p))); __v; }) #define inl(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(__io(p))); __v; }) #define outsb(p, d, l) writesb(__io(p), d, l) #define outsw(p, d, l) writesw(__io(p), d, l) #define outsl(p, d, l) writesl(__io(p), d, l) #define insb(p, d, l) readsb(__io(p), d, l) #define insw(p, d, l) readsw(__io(p), d, l) #define insl(p, d, l) readsl(__io(p), d, l) static inline void readsb(unsigned int *addr, void *data, int bytelen) { unsigned char *ptr; unsigned char *ptr2; ptr = (unsigned char *)addr; ptr2 = (unsigned char *)data; while (bytelen) { *ptr2 = *ptr; ptr2++; bytelen--; } } static inline void readsw(unsigned int *addr, void *data, int wordlen) { unsigned short *ptr; unsigned short *ptr2; ptr = (unsigned short *)addr; ptr2 = (unsigned short *)data; while (wordlen) { *ptr2 = *ptr; ptr2++; wordlen--; } } static inline void readsl(unsigned int *addr, void *data, int longlen) { unsigned int *ptr; unsigned int *ptr2; ptr = (unsigned int *)addr; ptr2 = (unsigned int *)data; while (longlen) { *ptr2 = *ptr; ptr2++; longlen--; } } static inline void writesb(unsigned int *addr, const void *data, int bytelen) { unsigned char *ptr; unsigned char *ptr2; ptr = (unsigned char *)addr; ptr2 = (unsigned char *)data; while (bytelen) { *ptr = *ptr2; ptr2++; bytelen--; } } static inline void writesw(unsigned int *addr, const void *data, int wordlen) { unsigned short *ptr; unsigned short *ptr2; ptr = (unsigned short *)addr; ptr2 = (unsigned short *)data; while (wordlen) { *ptr = *ptr2; ptr2++; wordlen--; } } static inline void writesl(unsigned int *addr, const void *data, int longlen) { unsigned int *ptr; unsigned int *ptr2; ptr = (unsigned int *)addr; ptr2 = (unsigned int *)data; while (longlen) { *ptr = *ptr2; ptr2++; longlen--; } } #endif #define outb_p(val, port) outb((val), (port)) #define outw_p(val, port) outw((val), (port)) #define outl_p(val, port) outl((val), (port)) #define inb_p(port) inb((port)) #define inw_p(port) inw((port)) #define inl_p(port) inl((port)) #define outsb_p(port, from, len) outsb(port, from, len) #define outsw_p(port, from, len) outsw(port, from, len) #define outsl_p(port, from, len) outsl(port, from, len) #define insb_p(port, to, len) insb(port, to, len) #define insw_p(port, to, len) insw(port, to, len) #define insl_p(port, to, len) insl(port, to, len) #include #endif /* __ASM_RISCV_IO_H */