/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2020 Marvell International Ltd. * * Helper functions to abstract SFP and QSFP connectors */ #ifndef __CVMX_HELPER_SFP_H__ #define __CVMX_HELPER_SFP_H__ /** * Maximum size for the SFP EEPROM. Currently only 96 bytes are used. */ #define CVMX_SFP_MAX_EEPROM_SIZE 0x100 /** * Default address of sfp EEPROM */ #define CVMX_SFP_DEFAULT_I2C_ADDR 0x50 /** * Default address of SFP diagnostics chip */ #define CVMX_SFP_DEFAULT_DIAG_I2C_ADDR 0x51 struct cvmx_fdt_sfp_info; struct cvmx_fdt_gpio_info; /** * Connector type for module, usually we only see SFP and QSFPP */ enum cvmx_phy_sfp_conn_type { CVMX_SFP_CONN_GBIC = 0x01, /** GBIC */ CVMX_SFP_CONN_SFP = 0x03, /** SFP/SFP+/SFP28 */ CVMX_SFP_CONN_QSFP = 0x0C, /** 1G QSFP (obsolete) */ CVMX_SFP_CONN_QSFPP = 0x0D, /** QSFP+ or later */ CVMX_SFP_CONN_QSFP28 = 0x11, /** QSFP28 (100Gbps) */ CVMX_SFP_CONN_MICRO_QSFP = 0x17, /** Micro QSFP */ CVMX_SFP_CONN_QSFP_DD = 0x18, /** QSFP-DD Double Density 8X */ CVMX_SFP_CONN_SFP_DD = 0x1A, /** SFP-DD Double Density 2X */ }; /** * module type plugged into a SFP/SFP+/QSFP+ port */ enum cvmx_phy_sfp_mod_type { CVMX_SFP_MOD_UNKNOWN = 0, /** Unknown or unspecified */ /** Fiber optic module (LC connector) */ CVMX_SFP_MOD_OPTICAL_LC = 0x7, /** Multiple optical */ CVMX_SFP_MOD_MULTIPLE_OPTICAL = 0x9, /** Fiber optic module (pigtail, no connector) */ CVMX_SFP_MOD_OPTICAL_PIGTAIL = 0xB, CVMX_SFP_MOD_COPPER_PIGTAIL = 0x21, /** copper module */ CVMX_SFP_MOD_RJ45 = 0x22, /** RJ45 (i.e. 10GBase-T) */ /** No separable connector (SFP28/copper) */ CVMX_SFP_MOD_NO_SEP_CONN = 0x23, /** MXC 2X16 */ CVMX_SFP_MOD_MXC_2X16 = 0x24, /** CS optical connector */ CVMX_SFP_MOD_CS_OPTICAL = 0x25, /** Mini CS optical connector */ CVMX_SFP_MOD_MINI_CS_OPTICAL = 0x26, /** Unknown/other module type */ CVMX_SFP_MOD_OTHER }; /** Peak rate supported by SFP cable */ enum cvmx_phy_sfp_rate { CVMX_SFP_RATE_UNKNOWN, /** Unknown rate */ CVMX_SFP_RATE_1G, /** 1Gbps */ CVMX_SFP_RATE_10G, /** 10Gbps */ CVMX_SFP_RATE_25G, /** 25Gbps */ CVMX_SFP_RATE_40G, /** 40Gbps */ CVMX_SFP_RATE_100G /** 100Gbps */ }; /** * Cable compliance specification * See table 4-4 from SFF-8024 for the extended specification compliance codes */ enum cvmx_phy_sfp_cable_ext_compliance { CVMX_SFP_CABLE_UNSPEC = 0, CVMX_SFP_CABLE_100G_25GAUI_C2M_AOC_HIGH_BER = 0x01, /** Active optical cable */ CVMX_SFP_CABLE_100G_SR4_25G_SR = 0x2, CVMX_SFP_CABLE_100G_LR4_25G_LR = 0x3, CVMX_SFP_CABLE_100G_ER4_25G_ER = 0x4, CVMX_SFP_CABLE_100G_SR10 = 0x5, CVMX_SFP_CABLE_100G_CWDM4_MSA = 0x6, CVMX_SFP_CABLE_100G_PSM4 = 0x7, CVMX_SFP_CABLE_100G_25GAUI_C2M_ACC_HIGH_BER = 0x8, CVMX_SFP_CABLE_100G_CWDM4 = 0x9, CVMX_SFP_CABLE_100G_CR4_25G_CR_CA_L = 0xB, CVMX_SFP_CABLE_25G_CR_CA_S = 0xC, CVMX_SFP_CABLE_25G_CR_CA_N = 0xD, CVMX_SFP_CABLE_40G_ER4 = 0x10, CVMX_SFP_CABLE_4X10G_SR = 0x11, CVMX_SFP_CABLE_40G_PSM4 = 0x12, CVMX_SFP_CABLE_G959_1_P1I1_2D1 = 0x13, CVMX_SFP_CABLE_G959_1_P1S1_2D2 = 0x14, CVMX_SFP_CABLE_G959_1_P1L1_2D2 = 0x15, CVMX_SFP_CABLE_10GBASE_T = 0x16, CVMX_SFP_CABLE_100G_CLR4 = 0x17, CVMX_SFP_CABLE_100G_25GAUI_C2M_AOC_LOW_BER = 0x18, CVMX_SFP_CABLE_100G_25GAUI_C2M_ACC_LOW_BER = 0x19, CVMX_SFP_CABLE_100G_2_LAMBDA_DWDM = 0x1a, CVMX_SFP_CABLE_100G_1550NM_WDM = 0x1b, CVMX_SFP_CABLE_10GBASE_T_SR = 0x1c, CVMX_SFP_CABLE_5GBASE_T = 0x1d, CVMX_SFP_CABLE_2_5GBASE_T = 0x1e, CVMX_SFP_CABLE_40G_SWDM4 = 0x1f, CVMX_SFP_CABLE_100G_SWDM4 = 0x20, CVMX_SFP_CABLE_100G_PAM4_BIDI = 0x21, CVMX_SFP_CABLE_100G_4WDM_10_FEC_HOST = 0x22, CVMX_SFP_CABLE_100G_4WDM_20_FEC_HOST = 0x23, CVMX_SFP_CABLE_100G_4WDM_40_FEC_HOST = 0x24, CVMX_SFP_CABLE_100GBASE_DR_CAUI4_NO_FEC = 0x25, CVMX_SFP_CABLE_100G_FR_CAUI4_NO_FEC = 0x26, CVMX_SFP_CABLE_100G_LR_CAUI4_NO_FEC = 0x27, CVMX_SFP_CABLE_ACTIVE_COPPER_50_100_200GAUI_LOW_BER = 0x30, CVMX_SFP_CABLE_ACTIVE_OPTICAL_50_100_200GAUI_LOW_BER = 0x31, CVMX_SFP_CABLE_ACTIVE_COPPER_50_100_200GAUI_HI_BER = 0x32, CVMX_SFP_CABLE_ACTIVE_OPTICAL_50_100_200GAUI_HI_BER = 0x33, CVMX_SFP_CABLE_50_100_200G_CR = 0x40, CVMX_SFP_CABLE_50_100_200G_SR = 0x41, CVMX_SFP_CABLE_50GBASE_FR_200GBASE_DR4 = 0x42, CVMX_SFP_CABLE_200GBASE_FR4 = 0x43, CVMX_SFP_CABLE_200G_1550NM_PSM4 = 0x44, CVMX_SFP_CABLE_50GBASE_LR = 0x45, CVMX_SFP_CABLE_200GBASE_LR4 = 0x46, CVMX_SFP_CABLE_64GFC_EA = 0x50, CVMX_SFP_CABLE_64GFC_SW = 0x51, CVMX_SFP_CABLE_64GFC_LW = 0x52, CVMX_SFP_CABLE_128GFC_EA = 0x53, CVMX_SFP_CABLE_128GFC_SW = 0x54, CVMX_SFP_CABLE_128GFC_LW = 0x55, }; /** Optical modes module is compliant with */ enum cvmx_phy_sfp_10g_eth_compliance { CVMX_SFP_CABLE_10GBASE_ER = 0x80, /** 10G ER */ CVMX_SFP_CABLE_10GBASE_LRM = 0x40, /** 10G LRM */ CVMX_SFP_CABLE_10GBASE_LR = 0x20, /** 10G LR */ CVMX_SFP_CABLE_10GBASE_SR = 0x10 /** 10G SR */ }; /** Diagnostic ASIC compatibility */ enum cvmx_phy_sfp_sff_8472_diag_rev { CVMX_SFP_SFF_8472_NO_DIAG = 0x00, CVMX_SFP_SFF_8472_REV_9_3 = 0x01, CVMX_SFP_SFF_8472_REV_9_5 = 0x02, CVMX_SFP_SFF_8472_REV_10_2 = 0x03, CVMX_SFP_SFF_8472_REV_10_4 = 0x04, CVMX_SFP_SFF_8472_REV_11_0 = 0x05, CVMX_SFP_SFF_8472_REV_11_3 = 0x06, CVMX_SFP_SFF_8472_REV_11_4 = 0x07, CVMX_SFP_SFF_8472_REV_12_0 = 0x08, CVMX_SFP_SFF_8472_REV_UNALLOCATED = 0xff }; /** * Data structure describing the current SFP or QSFP EEPROM */ struct cvmx_sfp_mod_info { enum cvmx_phy_sfp_conn_type conn_type; /** Connector type */ enum cvmx_phy_sfp_mod_type mod_type; /** Module type */ enum cvmx_phy_sfp_rate rate; /** Rate of module */ /** 10G Ethernet Compliance codes (logical OR) */ enum cvmx_phy_sfp_10g_eth_compliance eth_comp; /** Extended Cable compliance */ enum cvmx_phy_sfp_cable_ext_compliance cable_comp; u8 vendor_name[17]; /** Module vendor name */ u8 vendor_oui[3]; /** vendor OUI */ u8 vendor_pn[17]; /** Vendor part number */ u8 vendor_rev[5]; /** Vendor revision */ u8 vendor_sn[17]; /** Vendor serial number */ u8 date_code[9]; /** Date code */ bool valid; /** True if module is valid */ bool active_cable; /** False for passive copper */ bool copper_cable; /** True if cable is copper */ /** True if module is limiting (i.e. not passive copper) */ bool limiting; /** Maximum length of copper cable in meters */ int max_copper_cable_len; /** Max single mode cable length in meters */ int max_single_mode_cable_length; /** Max 50um OM2 cable length */ int max_50um_om2_cable_length; /** Max 62.5um OM1 cable length */ int max_62_5um_om1_cable_length; /** Max 50um OM4 cable length */ int max_50um_om4_cable_length; /** Max 50um OM3 cable length */ int max_50um_om3_cable_length; /** Minimum bitrate in Mbps */ int bitrate_min; /** Maximum bitrate in Mbps */ int bitrate_max; /** * Set to true if forward error correction is required, * for example, a 25GBase-CR CA-S cable. * * FEC should only be disabled at 25G with CA-N cables. FEC is required * with 5M and longer cables. */ bool fec_required; /** True if RX output is linear */ bool linear_rx_output; /** Power level, can be 1, 2 or 3 */ int power_level; /** False if conventional cooling is used, true for active cooling */ bool cooled_laser; /** True if internal retimer or clock and data recovery circuit */ bool internal_cdr; /** True if LoS is implemented */ bool los_implemented; /** True if LoS is inverted from the standard */ bool los_inverted; /** True if TX_FAULT is implemented */ bool tx_fault_implemented; /** True if TX_DISABLE is implemented */ bool tx_disable_implemented; /** True if RATE_SELECT is implemented */ bool rate_select_implemented; /** True if tuneable transmitter technology is used */ bool tuneable_transmitter; /** True if receiver decision threshold is implemented */ bool rx_decision_threshold_implemented; /** True if diagnostic monitoring present */ bool diag_monitoring; /** True if diagnostic address 0x7f is used for selecting the page */ bool diag_paging; /** Diagnostic feature revision */ enum cvmx_phy_sfp_sff_8472_diag_rev diag_rev; /** True if an address change sequence is required for diagnostics */ bool diag_addr_change_required; /** True if RX power is averaged, false if OMA */ bool diag_rx_power_averaged; /** True if diagnostics are externally calibrated */ bool diag_externally_calibrated; /** True if diagnostics are internally calibrated */ bool diag_internally_calibrated; /** True of soft rate select control implemented per SFF-8431 */ bool diag_soft_rate_select_control; /** True if application select control implemented per SFF-8079 */ bool diag_app_select_control; /** True if soft RATE_SELECT control and moonitoring implemented */ bool diag_soft_rate_select_implemented; /** True if soft RX_LOS monitoring implemented */ bool diag_soft_rx_los_implemented; /** True if soft TX_FAULT monitoring implemented */ bool diag_soft_tx_fault_implemented; /** True if soft TX_DISABLE control and monitoring implemented */ bool diag_soft_tx_disable_implemented; /** True if alarm/warning flags implemented */ bool diag_alarm_warning_flags_implemented; }; /** * Reads the SFP EEPROM using the i2c bus * * @param[out] buffer Buffer to store SFP EEPROM data in * The buffer should be SFP_MAX_EEPROM_SIZE bytes. * @param i2c_bus i2c bus number to read from for SFP port * @param i2c_addr i2c address to use, 0 for default * * Return: -1 if invalid bus or i2c read error, 0 for success */ int cvmx_phy_sfp_read_i2c_eeprom(u8 *buffer, int i2c_bus, int i2c_addr); /** * Reads the SFP/SFP+/QSFP EEPROM and outputs the type of module or cable * plugged in * * @param[out] sfp_info Info about SFP module * @param[in] buffer SFP EEPROM buffer to parse * * Return: 0 on success, -1 if error reading EEPROM or if EEPROM corrupt */ int cvmx_phy_sfp_parse_eeprom(struct cvmx_sfp_mod_info *sfp_info, const u8 *buffer); /** * Prints out information about a SFP/QSFP device * * @param[in] sfp_info data structure to print */ void cvmx_phy_sfp_print_info(const struct cvmx_sfp_mod_info *sfp_info); /** * Reads and parses SFP/QSFP EEPROM * * @param sfp sfp handle to read * * Return: 0 for success, -1 on error. */ int cvmx_sfp_read_i2c_eeprom(struct cvmx_fdt_sfp_info *sfp); /** * Returns the information about a SFP/QSFP device * * @param sfp sfp handle * * Return: sfp_info Pointer sfp mod info data structure */ const struct cvmx_sfp_mod_info *cvmx_phy_get_sfp_mod_info(const struct cvmx_fdt_sfp_info *sfp); /** * Function called to check and return the status of the mod_abs pin or * mod_pres pin for QSFPs. * * @param sfp Handle to SFP information. * @param data User-defined data passed to the function * * Return: 0 if absent, 1 if present, -1 on error */ int cvmx_sfp_check_mod_abs(struct cvmx_fdt_sfp_info *sfp, void *data); /** * Registers a function to be called to check mod_abs/mod_pres for a SFP/QSFP * slot. * * @param sfp Handle to SFP data structure * @param check_mod_abs Function to be called or NULL to remove * @param mod_abs_data User-defined data to be passed to check_mod_abs * * Return: 0 for success */ int cvmx_sfp_register_check_mod_abs(struct cvmx_fdt_sfp_info *sfp, int (*check_mod_abs)(struct cvmx_fdt_sfp_info *sfp, void *data), void *mod_abs_data); /** * Registers a function to be called whenever the mod_abs/mod_pres signal * changes. * * @param sfp Handle to SFP data structure * @param mod_abs_changed Function called whenever mod_abs is changed * or NULL to remove. * @param mod_abs_changed_data User-defined data passed to * mod_abs_changed * * Return: 0 for success */ int cvmx_sfp_register_mod_abs_changed(struct cvmx_fdt_sfp_info *sfp, int (*mod_abs_changed)(struct cvmx_fdt_sfp_info *sfp, int val, void *data), void *mod_abs_changed_data); /** * Function called to check and return the status of the tx_fault pin * * @param sfp Handle to SFP information. * @param data User-defined data passed to the function * * Return: 0 if signal present, 1 if signal absent, -1 on error */ int cvmx_sfp_check_tx_fault(struct cvmx_fdt_sfp_info *sfp, void *data); /** * Function called to check and return the status of the rx_los pin * * @param sfp Handle to SFP information. * @param data User-defined data passed to the function * * Return: 0 if signal present, 1 if signal absent, -1 on error */ int cvmx_sfp_check_rx_los(struct cvmx_fdt_sfp_info *sfp, void *data); /** * Registers a function to be called whenever rx_los changes * * @param sfp Handle to SFP data structure * @param rx_los_changed Function to be called when rx_los changes * or NULL to remove the function * @param rx_los_changed_data User-defined data passed to * rx_los_changed * * Return: 0 for success */ int cvmx_sfp_register_rx_los_changed(struct cvmx_fdt_sfp_info *sfp, int (*rx_los_changed)(struct cvmx_fdt_sfp_info *sfp, int val, void *data), void *rx_los_changed_data); /** * Parses the device tree for SFP and QSFP slots * * @param fdt_addr Address of flat device-tree * * Return: 0 for success, -1 on error */ int cvmx_sfp_parse_device_tree(const void *fdt_addr); /** * Given an IPD port number find the corresponding SFP or QSFP slot * * @param ipd_port IPD port number to search for * * Return: pointer to SFP data structure or NULL if not found */ struct cvmx_fdt_sfp_info *cvmx_sfp_find_slot_by_port(int ipd_port); /** * Given a fdt node offset find the corresponding SFP or QSFP slot * * @param of_offset flat device tree node offset * * Return: pointer to SFP data structure or NULL if not found */ struct cvmx_fdt_sfp_info *cvmx_sfp_find_slot_by_fdt_node(int of_offset); /** * Reads the EEPROMs of all SFP modules. * * Return: 0 for success */ int cvmx_sfp_read_all_modules(void); /** * Validates if the module is correct for the specified port * * @param[in] sfp SFP port to check * @param mode interface mode * * Return: true if module is valid, false if invalid * NOTE: This will also toggle the error LED, if present */ bool cvmx_sfp_validate_module(struct cvmx_fdt_sfp_info *sfp, int mode); /** * Prints information about the SFP module * * @param[in] sfp sfp data structure */ void cvmx_sfp_print_info(const struct cvmx_fdt_sfp_info *sfp); #endif /* __CVMX_HELPER_SFP_H__ */