// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2018 Microsemi Corporation
 */

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "mscc,serval";

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			compatible = "mips,mips24KEc";
			device_type = "cpu";
			clocks = <&cpu_clk>;
			reg = <0>;
		};
	};

	aliases {
		serial0 = &uart0;
	};

	cpuintc: interrupt-controller@0 {
		#address-cells = <0>;
		#interrupt-cells = <1>;
		interrupt-controller;
		compatible = "mti,cpu-interrupt-controller";
	};

	cpu_clk: cpu-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <416666666>;
	};

	sys_clk: sys-clk {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <208333333>;
	};

	ahb_clk: ahb-clk {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <208333333>;
	};

	ahb {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0x70000000 0x2000000>;

		interrupt-parent = <&intc>;

		cpu_ctrl: syscon@0 {
			compatible = "mscc,serval-cpu-syscon", "syscon";
			reg = <0x0 0x2c>;
		};

		intc: interrupt-controller@70 {
			compatible = "mscc,serval-icpu-intr";
			reg = <0x70 0x70>;
			#interrupt-cells = <1>;
			interrupt-controller;
			interrupt-parent = <&cpuintc>;
			interrupts = <2>;
		};

		uart0: serial@100000 {
			pinctrl-0 = <&uart_pins>;
			pinctrl-names = "default";
			compatible = "ns16550a";
			reg = <0x100000 0x20>;
			interrupts = <6>;
			clocks = <&ahb_clk>;
			reg-io-width = <4>;
			reg-shift = <2>;

			status = "disabled";
		};

		uart2: serial@100800 {
			pinctrl-0 = <&uart2_pins>;
			pinctrl-names = "default";
			compatible = "ns16550a";
			reg = <0x100800 0x20>;
			interrupts = <7>;
			clocks = <&ahb_clk>;
			reg-io-width = <4>;
			reg-shift = <2>;

			status = "disabled";
		};

		reset@1070008 {
			compatible = "mscc,serval-chip-reset";
			reg = <0x1070008 0x4>;
		};

		gpio: pinctrl@1070034 {
			compatible = "mscc,serval-pinctrl";
			reg = <0x1070034 0x68>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&gpio 0 0 22>;

			sgpio_pins: sgpio-pins {
				pins = "GPIO_0", "GPIO_2", "GPIO_3", "GPIO_1";
				function = "sio";
			};

			uart_pins: uart-pins {
				pins = "GPIO_26", "GPIO_27";
				function = "uart";
			};

			uart2_pins: uart2-pins {
				pins = "GPIO_13", "GPIO_14";
				function = "uart2";
			};
		};

		spi0: spi-bitbang {
			compatible = "mscc,luton-bb-spi";
			status = "okay";
			reg = <0x50 0x4>;
			num-chipselects = <1>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		sgpio: gpio@10700b4 {
			compatible = "mscc,luton-sgpio";
			status = "disabled";
			clocks = <&sys_clk>;
			pinctrl-0 = <&sgpio_pins>;
			pinctrl-names = "default";
			reg = <0x10700b4 0x100>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&sgpio 0 0 64>;
		};

		switch: switch@011e0000 {
			compatible = "mscc,vsc7418-switch";
			reg = <0x011e0000 0x0100>,   // VTSS_TO_DEV0
			      <0x011f0000 0x0100>,   // VTSS_TO_DEV1
			      <0x01200000 0x0100>,   // VTSS_TO_DEV2
			      <0x01210000 0x0100>,   // VTSS_TO_DEV3
			      <0x01220000 0x0100>,   // VTSS_TO_DEV4
			      <0x01230000 0x0100>,   // VTSS_TO_DEV5
			      <0x01240000 0x0100>,   // VTSS_TO_DEV6
			      <0x01250000 0x0100>,   // VTSS_TO_DEV7
			      <0x01260000 0x0100>,   // VTSS_TO_DEV8
			      <0x01270000 0x0100>,   // VTSS_TO_DEV9
			      <0x01280000 0x0100>,   // VTSS_TO_DEV10
			      <0x01900000 0x100000>, // ANA
			      <0x01080000 0x20000>,  // QS
			      <0x01800000 0x100000>, // QSYS
			      <0x01030000 0x10000>,  // REW
			      <0x01010000 0x20000>,  // SYS
			      <0x010a0000 0x10000>;  // HSIO
			reg-names = "port0", "port1", "port2", "port3",
				    "port4", "port5", "port6", "port7",
				    "port8", "port9", "port10",
				    "ana", "qs", "qsys", "rew", "sys",
				    "hsio";
			status = "okay";

			ethernet-ports {
				#address-cells = <1>;
				#size-cells = <0>;
			};
		};

		mdio0: mdio@0107005c {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "mscc,serval-miim";
			reg = <0x0107005c 0x24>;
			status = "disabled";
		};

		mdio1: mdio@01070080 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "mscc,serval-miim";
			reg = <0x01070080 0x24>;
			status = "disabled";
		};

		hsio: syscon@10d0000 {
			compatible = "mscc,serval-hsio", "syscon", "simple-mfd";
			reg = <0x10a0000 0x10000>;

			serdes_hsio: serdes_hsio {
				compatible = "mscc,vsc7418-serdes";
				#phy-cells = <3>;
			};
		};
	};
};