// SPDX-License-Identifier: GPL-2.0+ /* * (C) Copyright 2003 * Josef Baumgartner * * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * Hayden Fraser (Hayden.Fraser@freescale.com) */ #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; /* get_clocks() fills in gd->cpu_clock and gd->bus_clk */ int get_clocks(void) { #if defined(CONFIG_M5208) pll_t *pll = (pll_t *) MMAP_PLL; out_8(&pll->odr, CFG_SYS_PLL_ODR); out_8(&pll->fdr, CFG_SYS_PLL_FDR); #endif #if defined(CONFIG_M5249) || defined(CONFIG_M5253) volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR); unsigned long pllcr; #ifndef CFG_SYS_PLL_BYPASS #ifdef CONFIG_M5249 /* Setup the PLL to run at the specified speed */ #ifdef CFG_SYS_FAST_CLK pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ #else pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ #endif #endif /* CONFIG_M5249 */ #ifdef CONFIG_M5253 pllcr = CFG_SYS_PLLCR; #endif /* CONFIG_M5253 */ cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ mbar2_writeLong(MCFSIM_PLLCR, cpll); /* Set the PLL to bypass mode (PSTCLK = crystal) */ mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* set the clock speed */ pllcr ^= 0x00000001; /* Set pll bypass to 1 */ mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ udelay(0x20); /* Wait for a lock ... */ #endif /* #ifndef CFG_SYS_PLL_BYPASS */ #endif /* CONFIG_M5249 || CONFIG_M5253 */ #if defined(CONFIG_M5275) pll_t *pll = (pll_t *)(MMAP_PLL); /* Setup PLL */ out_be32(&pll->syncr, 0x01080000); while (!(in_be32(&pll->synsr) & FMPLL_SYNSR_LOCK)) ; out_be32(&pll->syncr, 0x01000000); while (!(in_be32(&pll->synsr) & FMPLL_SYNSR_LOCK)) ; #endif gd->cpu_clk = CFG_SYS_CLK; #if defined(CONFIG_M5208) || defined(CONFIG_M5249) || defined(CONFIG_M5253) || \ defined(CONFIG_M5271) || defined(CONFIG_M5275) gd->bus_clk = gd->cpu_clk / 2; #else gd->bus_clk = gd->cpu_clk; #endif #ifdef CONFIG_SYS_I2C_FSL gd->arch.i2c1_clk = gd->bus_clk; #ifdef CONFIG_SYS_I2C2_FSL_OFFSET gd->arch.i2c2_clk = gd->bus_clk; #endif #endif return (0); }