/* SPDX-License-Identifier: GPL-2.0+ */ /* * UniPhier SG (SoC Glue) block registers * * Copyright (C) 2011-2015 Copyright (C) 2011-2015 Panasonic Corporation * Copyright (C) 2016-2017 Socionext Inc. * Author: Masahiro Yamada */ #ifndef UNIPHIER_SG_REGS_H #define UNIPHIER_SG_REGS_H #include #ifndef __ASSEMBLY__ #include #ifdef CONFIG_ARCH_UNIPHIER_V8_MULTI extern void __iomem *sg_base; #else #define sg_base ((void __iomem *)SG_BASE) #endif #endif /* __ASSEMBLY__ */ /* Base Address */ #define SG_BASE 0x5f800000 /* Revision */ #define SG_REVISION 0x0000 #define SG_REVISION_TYPE_MASK GENMASK(23, 16) #define SG_REVISION_MODEL_MASK GENMASK(10, 8) #define SG_REVISION_REV_MASK GENMASK(4, 0) /* Memory Configuration */ #define SG_MEMCONF 0x0400 #define SG_MEMCONF_CH0_SZ_MASK ((0x1 << 10) | (0x03 << 0)) #define SG_MEMCONF_CH0_SZ_64M ((0x0 << 10) | (0x01 << 0)) #define SG_MEMCONF_CH0_SZ_128M ((0x0 << 10) | (0x02 << 0)) #define SG_MEMCONF_CH0_SZ_256M ((0x0 << 10) | (0x03 << 0)) #define SG_MEMCONF_CH0_SZ_512M ((0x1 << 10) | (0x00 << 0)) #define SG_MEMCONF_CH0_SZ_1G ((0x1 << 10) | (0x01 << 0)) #define SG_MEMCONF_CH0_NUM_MASK (0x1 << 8) #define SG_MEMCONF_CH0_NUM_1 (0x1 << 8) #define SG_MEMCONF_CH0_NUM_2 (0x0 << 8) #define SG_MEMCONF_CH1_SZ_MASK ((0x1 << 11) | (0x03 << 2)) #define SG_MEMCONF_CH1_SZ_64M ((0x0 << 11) | (0x01 << 2)) #define SG_MEMCONF_CH1_SZ_128M ((0x0 << 11) | (0x02 << 2)) #define SG_MEMCONF_CH1_SZ_256M ((0x0 << 11) | (0x03 << 2)) #define SG_MEMCONF_CH1_SZ_512M ((0x1 << 11) | (0x00 << 2)) #define SG_MEMCONF_CH1_SZ_1G ((0x1 << 11) | (0x01 << 2)) #define SG_MEMCONF_CH1_NUM_MASK (0x1 << 9) #define SG_MEMCONF_CH1_NUM_1 (0x1 << 9) #define SG_MEMCONF_CH1_NUM_2 (0x0 << 9) #define SG_MEMCONF_CH2_SZ_MASK ((0x1 << 26) | (0x03 << 16)) #define SG_MEMCONF_CH2_SZ_64M ((0x0 << 26) | (0x01 << 16)) #define SG_MEMCONF_CH2_SZ_128M ((0x0 << 26) | (0x02 << 16)) #define SG_MEMCONF_CH2_SZ_256M ((0x0 << 26) | (0x03 << 16)) #define SG_MEMCONF_CH2_SZ_512M ((0x1 << 26) | (0x00 << 16)) #define SG_MEMCONF_CH2_SZ_1G ((0x1 << 26) | (0x01 << 16)) #define SG_MEMCONF_CH2_NUM_MASK (0x1 << 24) #define SG_MEMCONF_CH2_NUM_1 (0x1 << 24) #define SG_MEMCONF_CH2_NUM_2 (0x0 << 24) /* PH1-LD6b, ProXstream2, PH1-LD20 only */ #define SG_MEMCONF_CH2_DISABLE (0x1 << 21) #define SG_MEMCONF_SPARSEMEM (0x1 << 4) #define SG_USBPHYCTRL 0x0500 #define SG_ETPHYPSHUT 0x0554 #define SG_ETPHYCNT 0x0550 /* Pin Control */ #define SG_PINCTRL_BASE 0x1000 /* PH1-Pro4, PH1-Pro5 */ #define SG_LOADPINCTRL 0x1700 /* Input Enable */ #define SG_IECTRL 0x1d00 /* Pin Monitor */ #define SG_PINMON0 0x00100100 #define SG_PINMON2 0x00100108 #define SG_PINMON0_CLK_MODE_UPLLSRC_MASK (0x3 << 19) #define SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT (0x0 << 19) #define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27A (0x2 << 19) #define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27B (0x3 << 19) #define SG_PINMON0_CLK_MODE_AXOSEL_MASK (0x3 << 16) #define SG_PINMON0_CLK_MODE_AXOSEL_24576KHZ (0x0 << 16) #define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ (0x1 << 16) #define SG_PINMON0_CLK_MODE_AXOSEL_6144KHZ (0x2 << 16) #define SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ (0x3 << 16) #define SG_PINMON0_CLK_MODE_AXOSEL_DEFAULT (0x0 << 16) #define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U (0x1 << 16) #define SG_PINMON0_CLK_MODE_AXOSEL_20480KHZ (0x2 << 16) #define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A (0x3 << 16) #endif /* UNIPHIER_SG_REGS_H */