/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright 2019 NXP
 */

#include <config.h>

.align 8
.global boot_pointer
boot_pointer:
	.space 32

/*
 * Routine: save_boot_params (called after reset from start.S)
 */

.global save_boot_params
save_boot_params:
	/* The firmware provided ATAG/FDT address can be found in r2/x0 */
	adr	x0, boot_pointer
	stp	x1, x2, [x0], #16
	stp	x3, x4, [x0], #16

	/*
	 * We use absolute address not PC relative address for return.
	 * When running SPL on iMX8, the A core starts at address 0,
	 * an alias to OCRAM 0x100000, our linker address for SPL is
	 * from 0x100000. So using absolute address can jump to the OCRAM
	 * address from the alias. The alias only map first 96KB of OCRAM,
	 * so this require the SPL size can't beyond 96KB.
	 * But when using SPL DM, the size increase significantly and
	 * always beyonds 96KB. That's why we have to jump to OCRAM.
	 * Normal u-boot also runs into this codes, but there is no impact.
	 */
	ldr	x1, =save_boot_params_ret
	br	x1