/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2017 Theobroma Systems Design und Consulting GmbH */ /* * Execution starts on the instruction following this 4-byte header * (containing the magic 'RK30', 'RK31', 'RK32' or 'RK33'). This * magic constant will be written into the final image by the rkimage * tool, but we need to reserve space for it here. * * To make life easier for everyone, we build the SPL binary with * space for this 4-byte header already included in the binary. */ #ifdef CONFIG_SPL_BUILD /* * We need to add 4 bytes of space for the 'RK33' at the * beginning of the executable. However, as we want to keep * this generic and make it applicable to builds that are like * the RK3368 (TPL needs this, SPL doesn't) or the RK3399 (no * TPL, but extra space needed in the SPL), we simply insert * a branch-to-next-instruction-word with the expectation that * the first one may be overwritten, if this is the first stage * contained in the final image created with mkimage)... */ b 1f /* if overwritten, entry-address is at the next word */ 1: #endif #if CONFIG_IS_ENABLED(ROCKCHIP_EARLYRETURN_TO_BROM) adr r3, entry_counter ldr r0, [r3] cmp r0, #1 /* check if entry_counter == 1 */ beq reset /* regular bootup */ add r0, #1 str r0, [r3] /* increment the entry_counter in memory */ mov r0, #0 /* return 0 to the BROM to signal 'OK' */ bx lr /* return control to the BROM */ entry_counter: .word 0 #endif #if (defined(CONFIG_SPL_BUILD) || defined(CONFIG_ARM64)) /* U-Boot proper of armv7 do not need this */ b reset #endif #if !defined(CONFIG_ARM64) /* * For armv7, the addr '_start' will used as vector start address * and write to VBAR register, which needs to aligned to 0x20. */ .align(5), 0x0 _start: ARM_VECTORS #endif #if !defined(CONFIG_TPL_BUILD) && defined(CONFIG_SPL_BUILD) && \ (CONFIG_ROCKCHIP_SPL_RESERVE_IRAM > 0) .space CONFIG_ROCKCHIP_SPL_RESERVE_IRAM /* space for the ATF data */ #endif