// SPDX-License-Identifier: GPL-2.0+ /* * Xilinx CC108 board DTS * * (C) Copyright 2007-2018 Xilinx, Inc. * (C) Copyright 2007-2013 Michal Simek * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd * * Michal SIMEK */ /dts-v1/; /include/ "zynq-7000.dtsi" / { model = "Xilinx CC108 board"; compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; serial0 = &uart0; spi0 = &qspi; }; chosen { bootargs = ""; stdout-path = "serial0:115200n8"; }; memory@0 { device_type = "memory"; reg = <0x0 0x20000000>; }; usb_phy0: phy0 { compatible = "usb-nop-xceiv"; #phy-cells = <0>; }; usb_phy1: phy1 { compatible = "usb-nop-xceiv"; #phy-cells = <0>; }; }; &gem0 { status = "okay"; phy-mode = "rgmii-id"; phy-handle = <ðernet_phy>; ethernet_phy: ethernet-phy@1 { reg = <1>; device_type = "ethernet-phy"; }; }; &qspi { status = "okay"; is-dual = <0>; num-cs = <1>; flash@0 { /* 16 MB */ compatible = "n25q128a11", "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <50000000>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "qspi-fsbl-uboot-bs"; reg = <0x0 0x400000>; /* 4MB */ }; partition@400000 { label = "qspi-linux"; reg = <0x400000 0x400000>; /* 4MB */ }; partition@800000 { label = "qspi-rootfs"; reg = <0x800000 0x400000>; /* 4MB */ }; partition@c00000 { label = "qspi-devicetree"; reg = <0xc00000 0x100000>; /* 1MB */ }; partition@d00000 { label = "qspi-scratch"; reg = <0xd00000 0x200000>; /* 2MB */ }; partition@f00000 { label = "qspi-uboot-env"; reg = <0xf00000 0x100000>; /* 1MB */ }; }; }; &sdhci1 { status = "okay"; broken-cd ; wp-inverted ; }; &uart0 { bootph-all; status = "okay"; }; &usb0 { status = "okay"; dr_mode = "host"; usb-phy = <&usb_phy0>; }; &usb1 { status = "okay"; dr_mode = "host"; usb-phy = <&usb_phy1>; };