// SPDX-License-Identifier: (GPL-2.0+ OR X11) /* * Copyright 2018 Icenowy Zheng * Copyright 2018 Mesih Kilinc */ #include #include / { #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&intc>; clocks { osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; clock-output-names = "osc32k"; }; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; reg = <0x0>; }; }; soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; sram-controller@1c00000 { compatible = "allwinner,suniv-f1c100s-system-control", "allwinner,sun4i-a10-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; ranges; sram_d: sram@10000 { compatible = "mmio-sram"; reg = <0x00010000 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00010000 0x1000>; otg_sram: sram-section@0 { compatible = "allwinner,suniv-f1c100s-sram-d", "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; }; }; }; spi0: spi@1c05000 { compatible = "allwinner,suniv-f1c100s-spi", "allwinner,sun8i-h3-spi"; reg = <0x01c05000 0x1000>; interrupts = <10>; clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>; clock-names = "ahb", "mod"; resets = <&ccu RST_BUS_SPI0>; status = "disabled"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; }; spi1: spi@1c06000 { compatible = "allwinner,suniv-f1c100s-spi", "allwinner,sun8i-h3-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>; clock-names = "ahb", "mod"; resets = <&ccu RST_BUS_SPI1>; status = "disabled"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; }; mmc0: mmc@1c0f000 { compatible = "allwinner,suniv-f1c100s-mmc", "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>, <&ccu CLK_MMC0_OUTPUT>, <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <23>; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; mmc1: mmc@1c10000 { compatible = "allwinner,suniv-f1c100s-mmc", "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>, <&ccu CLK_MMC1_OUTPUT>, <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = <24>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; usb_otg: usb@1c13000 { compatible = "allwinner,suniv-f1c100s-musb"; reg = <0x01c13000 0x0400>; clocks = <&ccu CLK_BUS_OTG>; resets = <&ccu RST_BUS_OTG>; interrupts = <26>; interrupt-names = "mc"; phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; status = "disabled"; }; usbphy: phy@1c13400 { compatible = "allwinner,suniv-f1c100s-usb-phy"; reg = <0x01c13400 0x10>; reg-names = "phy_ctrl"; clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb0_phy"; resets = <&ccu RST_USB_PHY0>; reset-names = "usb0_reset"; #phy-cells = <1>; status = "disabled"; }; ccu: clock@1c20000 { compatible = "allwinner,suniv-f1c100s-ccu"; reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; }; intc: interrupt-controller@1c20400 { compatible = "allwinner,suniv-f1c100s-ic"; reg = <0x01c20400 0x400>; interrupt-controller; #interrupt-cells = <1>; }; pio: pinctrl@1c20800 { compatible = "allwinner,suniv-f1c100s-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <38>, <39>, <40>; clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; drive-strength = <30>; }; /omit-if-no-ref/ i2c0_pd_pins: i2c0-pd-pins { pins = "PD0", "PD12"; function = "i2c0"; }; spi0_pc_pins: spi0-pc-pins { pins = "PC0", "PC1", "PC2", "PC3"; function = "spi0"; }; uart0_pe_pins: uart0-pe-pins { pins = "PE0", "PE1"; function = "uart0"; }; /omit-if-no-ref/ uart1_pa_pins: uart1-pa-pins { pins = "PA2", "PA3"; function = "uart1"; }; }; i2c0: i2c@1c27000 { compatible = "allwinner,suniv-f1c100s-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x01c27000 0x400>; interrupts = <7>; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c1: i2c@1c27400 { compatible = "allwinner,suniv-f1c100s-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x01c27400 0x400>; interrupts = <8>; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c2: i2c@1c27800 { compatible = "allwinner,suniv-f1c100s-i2c", "allwinner,sun6i-a31-i2c"; reg = <0x01c27800 0x400>; interrupts = <9>; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; timer@1c20c00 { compatible = "allwinner,suniv-f1c100s-timer"; reg = <0x01c20c00 0x90>; interrupts = <13>, <14>, <15>; clocks = <&osc24M>; }; wdt: watchdog@1c20ca0 { compatible = "allwinner,suniv-f1c100s-wdt", "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = <16>; clocks = <&osc32k>; }; pwm: pwm@1c21000 { compatible = "allwinner,suniv-f1c100s-pwm", "allwinner,sun7i-a20-pwm"; reg = <0x01c21000 0x400>; clocks = <&osc24M>; #pwm-cells = <3>; status = "disabled"; }; ir: ir@1c22c00 { compatible = "allwinner,suniv-f1c100s-ir", "allwinner,sun6i-a31-ir"; reg = <0x01c22c00 0x400>; clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>; clock-names = "apb", "ir"; resets = <&ccu RST_BUS_IR>; interrupts = <6>; status = "disabled"; }; lradc: lradc@1c23400 { compatible = "allwinner,suniv-f1c100s-lradc", "allwinner,sun8i-a83t-r-lradc"; reg = <0x01c23400 0x400>; interrupts = <22>; status = "disabled"; }; uart0: serial@1c25000 { compatible = "snps,dw-apb-uart"; reg = <0x01c25000 0x400>; interrupts = <1>; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; uart1: serial@1c25400 { compatible = "snps,dw-apb-uart"; reg = <0x01c25400 0x400>; interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; uart2: serial@1c25800 { compatible = "snps,dw-apb-uart"; reg = <0x01c25800 0x400>; interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; }; };