// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /dts-v1/; #include #include #include #include "rk3566.dtsi" / { model = "Pine64 RK3566 Quartz64-A Board"; compatible = "pine64,quartz64-a", "rockchip,rk3566"; aliases { ethernet0 = &gmac1; mmc0 = &sdmmc0; mmc1 = &sdhci; }; chosen: chosen { stdout-path = "serial2:1500000n8"; }; gmac1_clkin: external-gmac1-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; clock-output-names = "gmac1_clkin"; #clock-cells = <0>; }; fan: gpio_fan { compatible = "gpio-fan"; gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0 4500 1>; pinctrl-names = "default"; pinctrl-0 = <&fan_en_h>; #cooling-cells = <2>; }; hdmi-con { compatible = "hdmi-connector"; type = "a"; port { hdmi_con_in: endpoint { remote-endpoint = <&hdmi_out_con>; }; }; }; leds { compatible = "gpio-leds"; led-work { label = "work-led"; default-state = "off"; gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&work_led_enable_h>; retain-state-suspended; }; led-diy { label = "diy-led"; default-state = "on"; gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; pinctrl-names = "default"; pinctrl-0 = <&diy_led_enable_h>; retain-state-suspended; }; }; rk817-sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; simple-audio-card,name = "Analog RK817"; simple-audio-card,mclk-fs = <256>; simple-audio-card,cpu { sound-dai = <&i2s1_8ch>; }; simple-audio-card,codec { sound-dai = <&rk817>; }; }; sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk817 1>; clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable_h>; post-power-on-delay-ms = <100>; power-off-delay-us = <5000000>; reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; }; spdif_dit: spdif-dit { compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; }; spdif_sound: spdif-sound { compatible = "simple-audio-card"; simple-audio-card,name = "SPDIF"; simple-audio-card,cpu { sound-dai = <&spdif>; }; simple-audio-card,codec { sound-dai = <&spdif_dit>; }; }; vcc12v_dcin: vcc12v_dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; /* vbus feeds the rk817 usb input. * With no battery attached, also feeds vcc_bat+ * via ON/OFF_BAT jumper */ vbus: vbus { compatible = "regulator-fixed"; regulator-name = "vbus"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc12v_dcin>; }; vcc3v3_pcie_p: vcc3v3-pcie-p-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie_enable_h>; regulator-name = "vcc3v3_pcie_p"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_3v3>; }; vcc5v0_usb: vcc5v0_usb { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc12v_dcin>; }; /* all four ports are controlled by one gpio * the host ports are sourced from vcc5v0_usb * the otg port is sourced from vcc5v0_midu */ vcc5v0_usb20_host: vcc5v0_usb20_host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_usb20_host_en>; regulator-name = "vcc5v0_usb20_host"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc5v0_usb>; }; vcc5v0_usb20_otg: vcc5v0_usb20_otg { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; regulator-name = "vcc5v0_usb20_otg"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&dcdc_boost>; }; vcc3v3_sd: vcc3v3_sd { compatible = "regulator-fixed"; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&vcc_sd_h>; regulator-boot-on; regulator-name = "vcc3v3_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_3v3>; }; /* sourced from vbus and vcc_bat+ via rk817 sw5 */ vcc_sys: vcc_sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <4400000>; regulator-max-microvolt = <4400000>; vin-supply = <&vbus>; }; /* sourced from vcc_sys, sdio module operates internally at 3.3v */ vcc_wl: vcc_wl { compatible = "regulator-fixed"; regulator-name = "vcc_wl"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_sys>; }; }; &combphy1 { status = "okay"; }; &combphy2 { status = "okay"; }; &cpu0 { cpu-supply = <&vdd_cpu>; }; &cpu1 { cpu-supply = <&vdd_cpu>; }; &cpu2 { cpu-supply = <&vdd_cpu>; }; &cpu3 { cpu-supply = <&vdd_cpu>; }; &cpu_thermal { trips { cpu_hot: cpu_hot { temperature = <55000>; hysteresis = <2000>; type = "active"; }; }; cooling-maps { map1 { trip = <&cpu_hot>; cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; &gmac1 { assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; clock_in_out = "input"; phy-supply = <&vcc_3v3>; phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&gmac1m0_miim &gmac1m0_tx_bus2 &gmac1m0_rx_bus2 &gmac1m0_rgmii_clk &gmac1m0_clkinout &gmac1m0_rgmii_bus>; snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; snps,reset-active-low; /* Reset time is 20ms, 100ms for rtl8211f */ snps,reset-delays-us = <0 20000 100000>; tx_delay = <0x30>; rx_delay = <0x10>; phy-handle = <&rgmii_phy1>; status = "okay"; }; &gpu { mali-supply = <&vdd_gpu>; status = "okay"; }; &hdmi { avdd-0v9-supply = <&vdda_0v9>; avdd-1v8-supply = <&vcc_1v8>; status = "okay"; }; &hdmi_in { hdmi_in_vp0: endpoint { remote-endpoint = <&vp0_out_hdmi>; }; }; &hdmi_out { hdmi_out_con: endpoint { remote-endpoint = <&hdmi_con_in>; }; }; &hdmi_sound { status = "okay"; }; &i2c0 { status = "okay"; vdd_cpu: regulator@1c { compatible = "tcs,tcs4525"; reg = <0x1c>; fcs,suspend-voltage-selector = <1>; regulator-name = "vdd_cpu"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1150000>; regulator-ramp-delay = <2300>; regulator-always-on; regulator-boot-on; vin-supply = <&vcc_sys>; regulator-state-mem { regulator-off-in-suspend; }; }; rk817: pmic@20 { compatible = "rockchip,rk817"; reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = ; assigned-clocks = <&cru I2S1_MCLKOUT_TX>; assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; clock-names = "mclk"; clocks = <&cru I2S1_MCLKOUT_TX>; clock-output-names = "rk808-clkout1", "rk808-clkout2"; #clock-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; rockchip,system-power-controller; #sound-dai-cells = <0>; wakeup-source; vcc1-supply = <&vcc_sys>; vcc2-supply = <&vcc_sys>; vcc3-supply = <&vcc_sys>; vcc4-supply = <&vcc_sys>; vcc5-supply = <&vcc_sys>; vcc6-supply = <&vcc_sys>; vcc7-supply = <&vcc_sys>; vcc8-supply = <&vcc_sys>; vcc9-supply = <&dcdc_boost>; regulators { vdd_logic: DCDC_REG1 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_logic"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <900000>; }; }; vdd_gpu: DCDC_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_gpu"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { regulator-always-on; regulator-boot-on; regulator-initial-mode = <0x2>; regulator-name = "vcc_ddr"; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_3v3: DCDC_REG4 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <0x2>; regulator-name = "vcc_3v3"; regulator-state-mem { regulator-off-in-suspend; }; }; vcca1v8_pmu: LDO_REG1 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca1v8_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vdda_0v9: LDO_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda_0v9"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_pmu: LDO_REG3 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda0v9_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <900000>; }; }; vccio_acodec: LDO_REG4 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_acodec"; regulator-state-mem { regulator-off-in-suspend; }; }; vccio_sd: LDO_REG5 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_sd"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_pmu: LDO_REG6 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc3v3_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vcc_1v8: LDO_REG7 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc_1v8"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc1v8_dvp: LDO_REG8 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc1v8_dvp"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc2v8_dvp: LDO_REG9 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-name = "vcc2v8_dvp"; regulator-state-mem { regulator-off-in-suspend; }; }; dcdc_boost: BOOST { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-name = "boost"; regulator-state-mem { regulator-off-in-suspend; }; }; otg_switch: OTG_SWITCH { regulator-name = "otg_switch"; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; }; /* i2c3 is exposed on con40 * pin 3 - i2c3_sda_m0, pullup to vcc_3v3 * pin 5 - i2c3_scl_m0, pullup to vcc_3v3 */ &i2c3 { status = "okay"; }; &i2s0_8ch { status = "okay"; }; &i2s1_8ch { pinctrl-names = "default"; pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; rockchip,trcm-sync-tx-only; status = "okay"; }; &mdio1 { rgmii_phy1: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; }; }; &pcie2x1 { pinctrl-names = "default"; pinctrl-0 = <&pcie_reset_h>; reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pcie_p>; status = "okay"; }; &pinctrl { bt { bt_enable_h: bt-enable-h { rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_l: bt-host-wake-l { rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; }; bt_wake_l: bt-wake-l { rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; fan { fan_en_h: fan-en-h { rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; leds { work_led_enable_h: work-led-enable-h { rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; diy_led_enable_h: diy-led-enable-h { rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pcie { pcie_enable_h: pcie-enable-h { rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; pcie_reset_h: pcie-reset-h { rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int_l: pmic-int-l { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb2 { vcc5v0_usb20_host_en: vcc5v0-usb20-host-en { rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; vcc_sd { vcc_sd_h: vcc-sd-h { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; &pmu_io_domains { pmuio1-supply = <&vcc3v3_pmu>; pmuio2-supply = <&vcc3v3_pmu>; vccio1-supply = <&vccio_acodec>; vccio2-supply = <&vcc_1v8>; vccio3-supply = <&vccio_sd>; vccio4-supply = <&vcc_1v8>; vccio5-supply = <&vcc_3v3>; vccio6-supply = <&vcc1v8_dvp>; vccio7-supply = <&vcc_3v3>; status = "okay"; }; &sdhci { bus-width = <8>; mmc-hs200-1_8v; non-removable; vmmc-supply = <&vcc_3v3>; vqmmc-supply = <&vcc_1v8>; status = "okay"; }; &sdmmc0 { bus-width = <4>; cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; sd-uhs-sdr104; vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>; status = "okay"; }; &sdmmc1 { bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; sd-uhs-sdr104; vmmc-supply = <&vcc_wl>; vqmmc-supply = <&vcc_1v8>; status = "okay"; }; &sfc { pinctrl-0 = <&fspi_pins>; pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <24000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <1>; }; }; /* spdif is exposed on con40 pin 18 */ &spdif { status = "okay"; }; /* spi1 is exposed on con40 * pin 11 - spi1_mosi_m1 * pin 13 - spi1_miso_m1 * pin 15 - spi1_clk_m1 * pin 17 - spi1_cs0_m1 */ &spi1 { pinctrl-names = "default"; pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; }; &tsadc { /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-mode = <1>; /* tshut polarity 0:LOW 1:HIGH */ rockchip,hw-tshut-polarity = <0>; status = "okay"; }; /* uart0 is exposed on con40 * pin 12 - uart0_tx * pin 14 - uart0_rx */ &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; status = "okay"; uart-has-rtscts; bluetooth { compatible = "brcm,bcm43438-bt"; clocks = <&rk817 1>; clock-names = "lpo"; host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; vbat-supply = <&vcc_sys>; vddio-supply = <&vcca1v8_pmu>; max-speed = <3000000>; }; }; /* uart2 is exposed on con40 * pin 8 - uart2_tx_m0_debug * pin 10 - uart2_rx_m0_debug */ &uart2 { status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_ohci { status = "okay"; }; &usb_host1_ehci { status = "okay"; }; &usb_host1_ohci { status = "okay"; }; &usb_host0_xhci { dr_mode = "host"; status = "okay"; }; /* usb3 controller is muxed with sata1 */ &usb_host1_xhci { status = "okay"; }; &usb2phy0 { status = "okay"; }; &usb2phy0_host { phy-supply = <&vcc5v0_usb20_host>; status = "okay"; }; &usb2phy0_otg { phy-supply = <&vcc5v0_usb20_otg>; status = "okay"; }; &usb2phy1 { status = "okay"; }; &usb2phy1_host { phy-supply = <&vcc5v0_usb20_host>; status = "okay"; }; &usb2phy1_otg { phy-supply = <&vcc5v0_usb20_host>; status = "okay"; }; &vop { assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; status = "okay"; }; &vop_mmu { status = "okay"; }; &vp0 { vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { reg = ; remote-endpoint = <&hdmi_in_vp0>; }; };