// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) /* * Device Tree Source for the R-Car V4H White Hawk CSI/DSI sub-board * * Copyright (C) 2022 Glider bv */ #include &csi40 { status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; csi40_in: endpoint { bus-type = ; clock-lanes = <0>; data-lanes = <1 2 3>; remote-endpoint = <&max96712_out0>; }; }; }; }; &csi41 { status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; csi41_in: endpoint { bus-type = ; clock-lanes = <0>; data-lanes = <1 2 3>; remote-endpoint = <&max96712_out1>; }; }; }; }; &i2c0 { pca9654_a: gpio@21 { compatible = "onnn,pca9654"; reg = <0x21>; gpio-controller; #gpio-cells = <2>; }; pca9654_b: gpio@22 { compatible = "onnn,pca9654"; reg = <0x22>; gpio-controller; #gpio-cells = <2>; }; eeprom@52 { compatible = "rohm,br24g01", "atmel,24c01"; label = "csi-dsi-sub-board-id"; reg = <0x52>; pagesize = <8>; }; }; &i2c1 { gmsl0: gmsl-deserializer@49 { compatible = "maxim,max96712"; reg = <0x49>; enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>; ports { #address-cells = <1>; #size-cells = <0>; port@4 { reg = <4>; max96712_out0: endpoint { bus-type = ; clock-lanes = <0>; data-lanes = <1 2 3>; remote-endpoint = <&csi40_in>; }; }; }; }; gmsl1: gmsl-deserializer@4b { compatible = "maxim,max96712"; reg = <0x4b>; enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>; ports { #address-cells = <1>; #size-cells = <0>; port@4 { reg = <4>; max96712_out1: endpoint { bus-type = ; clock-lanes = <0>; data-lanes = <1 2 3>; remote-endpoint = <&csi41_in>; }; }; }; }; }; &isp0 { status = "okay"; }; &isp1 { status = "okay"; }; &vin00 { status = "okay"; }; &vin01 { status = "okay"; }; &vin02 { status = "okay"; }; &vin03 { status = "okay"; }; &vin04 { status = "okay"; }; &vin05 { status = "okay"; }; &vin06 { status = "okay"; }; &vin07 { status = "okay"; }; &vin08 { status = "okay"; }; &vin09 { status = "okay"; }; &vin10 { status = "okay"; }; &vin11 { status = "okay"; }; &vin12 { status = "okay"; }; &vin13 { status = "okay"; }; &vin14 { status = "okay"; }; &vin15 { status = "okay"; };