// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright 2022 NXP
 */

/dts-v1/;

#include "imx93.dtsi"

/ {
	model = "NXP i.MX93 11X11 EVK board";
	compatible = "fsl,imx93-11x11-evk", "fsl,imx93";

	chosen {
		stdout-path = &lpuart1;
	};

	reg_vref_1v8: regulator-adc-vref {
		compatible = "regulator-fixed";
		regulator-name = "vref_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};

	reg_usdhc2_vmmc: regulator-usdhc2 {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
		regulator-name = "VSD_3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};
};

&adc1 {
	vref-supply = <&reg_vref_1v8>;
	status = "okay";
};

&mu1 {
	status = "okay";
};

&mu2 {
	status = "okay";
};

&eqos {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_eqos>;
	phy-mode = "rgmii-id";
	phy-handle = <&ethphy1>;
	status = "okay";

	mdio {
		compatible = "snps,dwmac-mdio";
		#address-cells = <1>;
		#size-cells = <0>;
		clock-frequency = <5000000>;

		ethphy1: ethernet-phy@1 {
			reg = <1>;
			eee-broken-1000t;
		};
	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec>;
	phy-mode = "rgmii-id";
	phy-handle = <&ethphy2>;
	fsl,magic-packet;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;
		clock-frequency = <5000000>;

		ethphy2: ethernet-phy@2 {
			reg = <2>;
			eee-broken-1000t;
		};
	};
};

&lpi2c2 {
	#address-cells = <1>;
	#size-cells = <0>;
	clock-frequency = <400000>;
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&pinctrl_lpi2c2>;
	pinctrl-1 = <&pinctrl_lpi2c2>;
	status = "okay";

	pmic@25 {
		compatible = "nxp,pca9451a";
		reg = <0x25>;
		interrupt-parent = <&pcal6524>;
		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;

		regulators {
			buck1: BUCK1 {
				regulator-name = "BUCK1";
				regulator-min-microvolt = <650000>;
				regulator-max-microvolt = <2237500>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <3125>;
			};

			buck2: BUCK2 {
				regulator-name = "BUCK2";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <2187500>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <3125>;
			};

			buck4: BUCK4{
				regulator-name = "BUCK4";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck5: BUCK5{
				regulator-name = "BUCK5";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck6: BUCK6 {
				regulator-name = "BUCK6";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo1: LDO1 {
				regulator-name = "LDO1";
				regulator-min-microvolt = <1600000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo4: LDO4 {
				regulator-name = "LDO4";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo5: LDO5 {
				regulator-name = "LDO5";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};
		};
	};

	pcal6524: gpio@22 {
		compatible = "nxp,pcal6524";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pcal6524>;
		reg = <0x22>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		interrupt-parent = <&gpio3>;
		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
	};

	adp5585gpio: gpio@34 {
		compatible = "adp5585";
		reg = <0x34>;
		gpio-controller;
		#gpio-cells = <2>;
	};
};

&lpuart1 { /* console */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc1>;
	pinctrl-1 = <&pinctrl_usdhc1>;
	pinctrl-2 = <&pinctrl_usdhc1>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&reg_usdhc2_vmmc>;
	bus-width = <4>;
	status = "okay";
	no-sdio;
	no-mmc;
};

&iomuxc {
	pinctrl_lpi2c2: lpi2c2grp {
		fsl,pins = <
			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e
			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e
		>;
	};

	pinctrl_pcal6524: pcal6524grp {
		fsl,pins = <
			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
		>;
	};

	pinctrl_eqos: eqosgrp {
		fsl,pins = <
			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
		>;
	};

	pinctrl_fec: fecgrp {
		fsl,pins = <
			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e
			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x57e
			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
		>;
	};

	pinctrl_uart1: uart1grp {
		fsl,pins = <
			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
		>;
	};

	pinctrl_usdhc1: usdhc1grp {
		fsl,pins = <
			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
		>;
	};

	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
		fsl,pins = <
			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
		>;
	};

	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
		fsl,pins = <
			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
		>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
		>;
	};
};