menu "Functionality shared between NXP SoCs" config FSL_TRUST_ARCH_v1 bool config NXP_ESBC bool "NXP ESBC (secure boot) functionality" select FSL_TRUST_ARCH_v1 if ARCH_P3041 || ARCH_P4080 || \ ARCH_P5040 || ARCH_P2041 help Enable Freescale Secure Boot feature. Normally selected by defconfig. If unsure, do not change. menu "Chain of trust / secure boot options" depends on !FIT_SIGNATURE && NXP_ESBC config CHAIN_OF_TRUST select FSL_CAAM select ARCH_MISC_INIT select FSL_ISBC_KEY_EXT if (ARM || FSL_CORENET) && !SYS_RAMBOOT select FSL_SEC_MON select SPL_BOARD_INIT if (ARM && SPL) select SPL_HASH if (ARM && SPL) select SHA_HW_ACCEL select SHA_PROG_HW_ACCEL select ENV_IS_NOWHERE select SYS_CPC_REINIT_F if MPC85xx && !SYS_RAMBOOT select CMD_EXT4 if ARM select CMD_EXT4_WRITE if ARM imply CMD_BLOB imply CMD_HASH if ARM def_bool y config CMD_ESBC_VALIDATE bool "Enable the 'esbc_validate' and 'esbc_halt' commands" default y help This option enables two commands used for secure booting: esbc_validate - validate signature using RSA verification esbc_halt - put the core in spin loop (Secure Boot Only) config ESBC_HDR_LS bool config ESBC_ADDR_64BIT def_bool y depends on FSL_LAYERSCAPE help For Layerscape based platforms, ESBC image Address in Header is 64bit. config FSL_ISBC_KEY_EXT bool help The key used for verification of next level images is picked up from an Extension Table which has been verified by the ISBC (Internal Secure boot Code) in boot ROM of the SoC. The feature is only applicable in case of NOR boot and is not applicable in case of RAMBOOT (NAND, SD, SPI). For Layerscape, this feature is available for all device if IE Table is copied to XIP memory Also, for Layerscape, ISBC doesn't verify this table. config SYS_FSL_SFP_BE def_bool y depends on PPC || FSL_LSCH2 || ARCH_LS1021A config SYS_FSL_SFP_LE def_bool y depends on !SYS_FSL_SFP_BE choice prompt "SFP IP revision" default SYS_FSL_SFP_VER_3_0 if PPC default SYS_FSL_SFP_VER_3_4 config SYS_FSL_SFP_VER_3_0 bool "SFP version 3.0" config SYS_FSL_SFP_VER_3_2 bool "SFP version 3.2" config SYS_FSL_SFP_VER_3_4 bool "SFP version 3.4" endchoice config SPL_UBOOT_KEY_HASH string "Non-SRK key hash for U-Boot public/private key pair" depends on SPL default "" help Set the key hash for U-Boot here if public/private key pair used to sign U-Boot are different from the SRK hash put in the fuse. Example of a key hash is 41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b. Otherwise leave this empty. if PPC config BOOTSCRIPT_COPY_RAM bool "Secure boot copies boot script to RAM" help On systems that support chain of trust booting, a number of addresses are required to set variables that are used in the copying and then verification of different parts of the system. If enabled, the subsequent options are for what location to use in each step. config BS_ADDR_DEVICE hex "Address in RAM for bs_device" depends on BOOTSCRIPT_COPY_RAM config BS_SIZE hex "The size of bs_size which is the amount read from bs_device" depends on BOOTSCRIPT_COPY_RAM config BS_ADDR_RAM hex "Address in RAM for bs_ram" depends on BOOTSCRIPT_COPY_RAM config BS_HDR_ADDR_DEVICE hex "Address in RAM for bs_hdr_device" depends on BOOTSCRIPT_COPY_RAM config BS_HDR_SIZE hex "The size of bs_hdr_size which is the amount read from bs_hdr_device" depends on BOOTSCRIPT_COPY_RAM config BS_HDR_ADDR_RAM hex "Address in RAM for bs_hdr_ram" depends on BOOTSCRIPT_COPY_RAM config BOOTSCRIPT_HDR_ADDR hex "CONFIG_BOOTSCRIPT_HDR_ADDR" default BS_ADDR_RAM if BOOTSCRIPT_COPY_RAM endif config SYS_FSL_SRK_LE def_bool y depends on ARM config KEY_REVOCATION def_bool y endmenu config DEEP_SLEEP bool "Enable SoC deep sleep feature" depends on ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || ARCH_LS1021A default y help Indicates this SoC supports deep sleep feature. If deep sleep is supported, core will start to execute uboot when wakes up. config LAYERSCAPE_NS_ACCESS bool "Layerscape non-secure access support" depends on ARCH_LS1021A || FSL_LSCH2 config PCIE1 bool "PCIe controller #1" depends on LAYERSCAPE_NS_ACCESS || PPC config PCIE2 bool "PCIe controller #2" depends on LAYERSCAPE_NS_ACCESS || PPC config PCIE3 bool "PCIe controller #3" depends on LAYERSCAPE_NS_ACCESS || PPC config PCIE4 bool "PCIe controller #4" depends on LAYERSCAPE_NS_ACCESS || PPC config FSL_USE_PCA9547_MUX bool "Enable PCA9547 I2C Mux on Freescale boards" depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 help This option enables the PCA9547 I2C mux on Freescale boards. config VID bool "Enable Freescale VID" depends on (PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3) && (I2C || DM_I2C) help This option enables setting core voltage based on individual values saved in SoC fuses. config SPL_VID bool "Enable Freescale VID in SPL" depends on (PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3) && (SPL_I2C || DM_SPL_I2C) help This option enables setting core voltage based on individual values saved in SoC fuses, in SPL. if VID || SPL_VID config VID_FLS_ENV string "Environment variable for overriding VDD" help This option allows for specifying the environment variable to check to override VDD information. config VOL_MONITOR_INA220 bool "Enable the INA220 voltage monitor read" help This option enables INA220 voltage monitor read functionality. It is used by the common VID driver. config VOL_MONITOR_IR36021_READ bool "Enable the IR36021 voltage monitor read" help This option enables IR36021 voltage monitor read functionality. It is used by the common VID driver. config VOL_MONITOR_IR36021_SET bool "Enable the IR36021 voltage monitor set" help This option enables IR36021 voltage monitor set functionality. It is used by the common VID driver. config VOL_MONITOR_LTC3882_READ bool "Enable the LTC3882 voltage monitor read" help This option enables LTC3882 voltage monitor read functionality. It is used by the common VID driver. config VOL_MONITOR_LTC3882_SET bool "Enable the LTC3882 voltage monitor set" help This option enables LTC3882 voltage monitor set functionality. It is used by the common VID driver. config VOL_MONITOR_ISL68233_READ bool "Enable the ISL68233 voltage monitor read" help This option enables ISL68233 voltage monitor read functionality. It is used by the common VID driver. config VOL_MONITOR_ISL68233_SET bool "Enable the ISL68233 voltage monitor set" help This option enables ISL68233 voltage monitor set functionality. It is used by the common VID driver. endif config SYS_FSL_NUM_CC_PLLS int "Number of clock control PLLs" depends on MPC85xx || FSL_LSCH2 || FSL_LSCH3 || ARCH_LS1021A || ARCH_LS1028A default 2 if ARCH_LS1021A || ARCH_LS1028A || FSL_LSCH2 default 6 if FSL_LSCH3 || MPC85xx config SYS_FSL_ESDHC_BE bool config SYS_FSL_IFC_BE bool config SYS_FSL_IFC_BANK_COUNT int "Maximum banks of Integrated flash controller" depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || \ ARCH_LS1088A || ARCH_LS1021A || ARCH_B4860 || ARCH_B4420 || \ ARCH_T4240 || ARCH_T1040 || ARCH_T1042 || ARCH_T1024 || \ ARCH_T2080 || ARCH_C29X || ARCH_P1010 || ARCH_BSC9131 || \ ARCH_BSC9132 default 3 if ARCH_BSC9131 || ARCH_BSC9132 default 4 if ARCH_LS1043A || ARCH_LS1046A || ARCH_B4860 || \ ARCH_B4420 || ARCH_P1010 default 8 if ARCH_LS2080A || ARCH_LS1088A || ARCH_LS1021A || \ ARCH_T4240 || ARCH_T1040 || ARCH_T1042 || \ ARCH_T1024 || ARCH_T2080 || ARCH_C29X config FSL_QIXIS bool "Enable QIXIS support" depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 config QIXIS_I2C_ACCESS bool "Access to QIXIS is over i2c" depends on FSL_QIXIS default y config HAS_FSL_DR_USB def_bool y depends on USB_EHCI_HCD && PPC config SYS_DPAA_FMAN bool config SYS_FSL_SRDS_1 bool config SYS_FSL_SRDS_2 bool config SYS_HAS_SERDES bool endmenu